TREX 7.0 installation Steps

hi all,
We need to install TREX 7.0 on solman (7.0 SP16) production server (OS is Windows 2003 server 32-bit)
I want to install TREX 7.0 Multi host.
Please help us by providing the following information
1) Pre-requisites
2) Installtion step by step
3) Post installation Activities.
Please assist us.
thanks and regards,
Kiranbabu

Kiran,
The following link to download the installation guide for SAP NetWeaver 2004s Standalone Engine Search and Classification (TREX) Multiple Host [ Distributed Enviornment]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/78df2a46-0a01-0010-ef81-a6be60cc5cfd
You can also use the following link
http://help.sap.com/saphelp_nw2004s/helpdata/en/40/83505303bd5616e10000000a114cbd/content.htm
I hope these links are helpful
Regards,
Satish.

Similar Messages

Issue in TREX 7.1_62 installation on Linux

Hello,
I am trying to install TREX 7.1_62 on Linux server.
I put /sapmnt as my installation location in sapinst.
While installing TREX instance the installer is terminating with below log:
_install.log
Traceback (most recent call last):
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5013, in createLinked
 os.symlink(link[1], link[0])
OSError: [Errno 17] File exists
Action: Creating directory structure for SAPSID D82, Instance 00 -- failed.
Exception description:
Traceback (most recent call last):
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 1340, in installInstance
 self.memberInstallStatus.doItOrNot(self.memberSarTrek.createdirs)
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5857, in doItOrNot
 step(*args, **keyArgs)
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 2542, in createdirs
 self.ds.createLinked()
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5016, in createLinked
 raise SetupException("failed to check/create link %s -> %s!" % (link[0], link[1]))
SetupException: >>>ERROR:failed to check/create link /usr/sap/D82 -> /sapmnt/D82!
############ >>>ERROR:failed to check/create link /usr/sap/D82 -> /sapmnt/D82! - TREX setup cannot proceed.
Exception description:
Traceback (most recent call last):
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 3562, in main
 Installer().mainTrexAction()
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 703, in mainTrexAction
 self.installInstance(step)
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 1379, in installInstance
 framework.error(str(e) + " - TREX setup cannot proceed.")
File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 3472, in error
 raise ErrorException(self.errorMarker + text,result=1)
ErrorException: <__main__.ErrorException instance at 0x7f4cfda6bd88>
* === Script execution resumee === *
* Step 1: Preparation and checks before TREX system installation : SUCCESS
* Step 2: TREX system installation : FAILED
* Script execution terminated at 2015-04-03_08.33.35 with error 1
I tried to use other locations like /usr/sap/D82 as installation location, inthat case it tries to create link like
/usr/sap/D82/D82 --> /usr/sap/D82
My server has /sapnt/D82 and /usr/sap/D82 as separate mount points.
/dev/mapper/vg_dd82-lvusapd82_3
 47G 1.1G 46G 3% /usr/sap/D82
/dev/mapper/vg_dd82-lvusapd82_4
 4.7G 139M 4.6G 3% /usr/sap/SMD/SMDA90
itsusravmdd05.jnj.com:/vol/itsusravmdd05_btb/btb_fsrf_sapmnt_d82
 25G 0 25G 0% /sapmnt/D82
I dont understand why installer is trying to create a softlink between
/sapmnt/D82 and /usr/sap/D82
Please share any information you guys are having.
Thanks & Regards,
Tejas

Hey Tejas,
All my installations (>= 7.10.57.00) are running fine in /usr/sap/>SID> for years now.
http://help.sap.com/saphelp_nwes72/helpdata/en/45/6ddd60fe7b40bfe10000000a1553f7/content.htm
I seem to recall on TREX 7.0 that it installed into /sapmnt and /usr/sap/<SID>
Cheers,
Amerjit

TREX problem: Rapid Installer 2.0

First I try to install EP 6.0 SR1 with Rapid Installer 2.0, I got an trex error in the installation. In this forum (read by Nicky Gromeleit) I got the information that installing TREX in rapid installation is not possible so I try again the following steps:
1) Install only EP platform succesfully
2) Install TREX manually succesfully
3) I have configured IIS 6.0 for TREX
4) After entering the name server adress in the SAP J2EE Engine Adminisatrator Tool I got only com.sapportals.wdf.WdfErrors in the TREX monitor, although the adress and port is correct. I use the url which you can see in "settings/ Landscape Overview" after starting trexgui.exe.
Did I forget something or must I change something else?
Regards,
Frank

Hi Frank,
I had the same problem in the rapidinstallation, but the installation of Trex manualy works fine. I used the port, witch you can find opening 'Drive:\usr\sap\TREX_<Instance>\sapprofile.ini' at line 'TREX/NameServer/Port'
In the Visual Administrator "-> Server 0 -> Services -> TREX Service" I changed the
Parameter 'nameserver.address' in my case to 'tcpip://localhost:port'
Nothing else is to do. So I did nearly the same as you, but maybe the port differs.
Greetings,
Axel

TREX 7.0 Installation

Hi All,
I've successfully installed NW04s sneak preview on my PC. I'm trying to install the TREX70SP07P1, for TREX installation after launching sapinst:
I select "SAP NetWeaver 2004s TREX Search and Classification" -> "Installation services for TREX global file system" -> "TREX global file system"
This step completed successfully.
Again I launch same sapinst and selected following options:
"SAP NetWeaver 2004s TREX Search and Classification" -> "Installation services for TREX instances" -> "TREX instance"
This step gives me following ERROR during installation:
CJS-00287 TREX HOTFIX CHECK: Cannot apply TREX hotfix. DIAGNOSIS: No TREX installations found on local host. SOLUTION: This installation requires an installed TREX version 70, SP 07 to apply hotfix 01.
Please help me resolving this issue

Hi,
You're trying to install the Patch 1 of SP07 for TREX. Did you installed TRX previously. Because to install this patch you must have TREX SP07 installed.
Downlad and install the TREX70SP07 and then the patch you mentioned
Message was edited by: HUSEYIN BILGEN

SRM Installation steps

Hi All,
Please give idea about SRM EBP 4.0 with Server 5.0 Installation steps to enable XI Integration ready. Provide high level sequnce of requirements to get an idea.
Thank you very much in advance,
Rama

Hi Rama,
You talk of two aspects jointly.
Installation is Basis activity for which you need to refer Installation Guides.
XI integration for respective scenarios of SRM can be found in respective business scenario config guides
Both these can be found on :
service.sap.com/ibc
(sent you the config guide for PDP SI which talks about XI integration for that scenario, If you are implementing other scenario you need to refer res config guide)
BR
Dinesh

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

Jumping an installation step on WAS 6.40 installation

Hello dear colleagues . I am installing the Database Instance of a WAS 6.40 with Oracle, but instead of a Standard Installation I used the option to copy the database from another system (this will be my quality system and I am copying the production database). On the post installation steps the installer runs a script called run_control.sql that tries to create the controlfiles , but I would like to jump this step as I have already created this controlfiles when I made the SID change of the database.
I am trying to modify the keydb.xml file on my installation directory , the section where checks if this run_controlfile is ok (actually it is marked [ERROR] and I change it for [OK]) , but the installer overrides my changes . How could I force this change? Is this keydb.xml the file that controls the installation steps or it is a different file?
Thanks in Advance for your help
Jose Luis Valverde
Spain

Hello
I already found the answer, I post it here in case anyone needs to use it.
To jump a step on the installation of a WAS 6.40 you have to stop the sapinst and launch it again with this parameter:
/sapinst SAPINST_SKIP_ERRORSTEP=true
But be advised that doing this could make you loose the sap support on the installation

Error in the post installation steps of SLD .

Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
Naresh

Hi Naresh,
Can you let me know the service pack for the portal.
Also try login in using administrator using the http://<localhost><port>/sld
thanks
Pankaj

Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
Holger

Hi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos

Webdynpro error in Post installation steps of SLD

Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
Naresh

Hey Aviad,
Yes I did, in my case I've installed PDK SP 9 over SP2 which is prohibited. If this is your case as well do the following:
1) From the Undeployment tab of the SDM select the com.sap.pct.pdk..
components.
2) Using the Archive remover tool which can be accessed from
System Administration > Support > Portal Runtime > Administration
Console > Archive Remover --> Remove the portal applications with prefixcom.sap.pct.pdk...
3) Navigate to Content Administration > Portal content > Content
Provided by SAP > Platform Add-Ons > Developer Content
and remove all the contents below this folder.
4) Restart the server
After this you can deploy the SP9 business package using the SDM.
Hope it helps,
Roy

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

NW PI Post Installation steps

Hello All,
I have installed a dual stack PI system and performing post installation steps for PI AS Java. In configuration tasks After completing NetWeaver initial setup with skipped steps I was progressing to next step to configure NW PI - AS ABAP in All Configuration Tasks-->NW PI - AS ABAP (Basic Configuration for Idoc, Proxy Maintain) but I couldn't find this option.
I have updated system, patches, cim etc still I couldnt find the above option, Please advise where I went wrong.
Thanks
Sam

Hi,
What is the pi version?
The steps differs from version to version . Like 7.1 and 7.3 are not exactly same. Can you check in the installation guide for the pi specific post steps for your version .
Regards,
Amit.

XI Post installation steps

Hi,
I'm trying to get XI going at a project. The basis guys have installed the server but I have an idea none of the 'post installation steps' have been completed.
The symptoms are that when I start the Integration Builder (SXMB_IFR) the Windows 'File Explorer' is started and not IE. The Integration Web page is not displayed.
I quickly looked at the Configuration guide and I see none of the RFC destinations mentioned in the guide.
Is this the reason for the problem ?. I need to know exactly what totell the basis people to look at. They have never done an XI installation before so I'm almost sure they have not done these configuration steps.
Thanks
Andre

Hi Andre,
They should look at the intallation/configuration guides that SAP provides. These guides can be found at the service.sap.com and/or help.sap.com
In a nutshell you have to make sure they have configured:
SLD settings, these involves configuring RFC destinations, Maintain the SLD parameters in SLDAPICUST.
Register, Starting up the queues. Configure the role of the integration server in trx SXMB_ADM or SXMB_ADMIN.
Hope this helps.
Cheers,
Roberto
Message was edited by: Roberto Viana

Post Installation Steps for ERP add-on Inventory Manager 4.0

Hi,
I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
Best Regards,
MC
Stephen Streeter Manju Venkatesha

Yeah...of course...
I forgot to specify it.
I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
All installation are not MCOD.
This mean every installation has its own DB with different SID for every installation.
And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
The total space of mount point is about 500 GB....
Thanks
Dan

TREX 7.0 installation Steps

Similar Messages

Maybe you are looking for