Trex 7.0 Release 50 HTTP Server red light problem
I have read most of all the messages around the http server.
My scenario is this:
Windows Host 32 bits
Trex 7.00 release 50 installed.
IIS 6.0
Aditional instances on the host : Solution Manager and Saprouter.
The http://host:port:/TREXHttpserver/TREXISAPIExt.dll?CMD=PING has never responded to me. I always get a the message Internt explorer cannot display the webpage.
I have manually created the application, the web site and the virtual directory. I have checked all the rights in the NTFS , Registry and Policy and they are all correct.
But i never get the cmd ping to get it work. Of course in the Services of the trex console the http server is always red.
Any ideas?
PD: I have created a case with SAP, but still no good.
Hi Daniel,
your issue possibly also solved by this new thread?
[IIS TREX|IIS TREX]
Best, Karsten
Similar Messages
-
Leopard 10.5.6 client 10.4.11 server red light in Directory Utility
Can some one please help or give me a few pointers
Im running OS X server 10.4.11 as an OD Master, i was able to bind my Powerbook running 10.5.4 to my OD and was able to login, once bond the server was listed in Directory Utility with a green light and was responding normally. However ive just installed the 10.5.6 update on my powerbook and now get a red light next to my server in Directory admin, it wont let me unbind unless i do a forced unbind and then a rebind still comes up with the same, red light next to server and server is not responding. I can no longer login to my OD accounts from the client
Anyonw have any ideas
thaks
Johndcwong wrote:
We are running Mac OS X 10.4.11 server and recently have problem of saving/transfer any image files (.jpg) to the server and giving this message "The finder cannot complete the operation because some data in xxxx.jpg could not be read or written. (Error code -36). We start having this problem after the system upgrade from 10.5.5 to 10.5.6 on one of our 20" imac. We do not have this problem with Tiger 10.4.11 clients.
I'm having exact same error code right after updating imac to 10.5.6 from 10.5.4. Trying to save to 10.4.11 server running basic file sharing (not server version) produces error: "The finder cannot complete the operation because some data in xxxx could not be read or written. (Error code -36)."
Transfering a file to the network volume produces a stall for about 2 minutes with no visible warning or spinning beachball, then comes back with error.
I'm able to create a folder on the remote volume, have double checked permissions, and copying from remote volume works fine. -
Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2
Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
LogA few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running. -
I forgot my password on my phone last week, and i lost all my contacts and that on my phone, since then the red light has stopped working so it doesnt flash when i get messages or emails, the only thing i have yet to set backup on my blackberry is my emails but i can't see this making a difference so that my red light comes on! is there anyway i can get my red light back on? or will it need repairing or something? thanks for your help!
In your profiles > advanced > active profile, make certain that your email settings include for the LED notification to be on.
If it is set on, you can always do a reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have a red light coming from my headphone jack. In the sound output, the only thing there shows optical digital output, though nothing is there. It started when I dropped the computer, and now the internal sound will not work. I tried to spin the toothpick around, and the red light would turn off for a few seconds, then it would flicker back on. This has happened about 5 or 6 times, so Im not sure if Im doing something wrong or if its a bigger problem.
Thanks!Please make a Genius Appointment and take it in for service. The red light is related to the optical digital output.
-
HTTP server download/install problems
This experience so far has been so awful, I hopt there's a fundamental problem, like I'm trying to download from the wrong place or something.
I want to set up a Solaris HTTP server to serve up my portlets. I tried downloading the HTTP server from http://download.oracle.com/otn/solaris/apache/apache0921_solaris.tar. Most of the time, I get a timeout error when clicking the link. Once I actually got a download, but when I untarred the file (tar xvf apache0921_solaris.tar), I got a directory checksum error. I also got lots of files and directories, but it's not obvious what to do with them. Do I even have the right download? Is there a more responsive server I can use to try the download again?
nullTodd,
Thank you for pointing out the problem with the Solaris download of the Oracle HTTP Server. We have placed a new file on OTN and I have tested that it downloads and extracts okay. The file is larger than the previous version, so it will take longer to download. Please go ahead and try the new file.
http://download.oracle.com/otn/solaris/apache/apache0921_solaris.tar
Thanks again,
Sue -
A strange flashing red light problem on the 8100.
Blackberry Pearl 8100
Problem: Usually after using it for the first time after several hours of non-use it will shut off unexpectedly, flash me the red light twice, and then allow me to turn it back on to a long load up. Battery power is fine. No data loss. No unexpected behavior beyond that.
Should I wipe it?
Any help is appreciated.
Thanks.I have never seen or heard of a 2008 shipping with, or supporting, 512MB DIMMs, I guess you may try, but then those would be the slower 667MHz FBDIMMs probably, and not 800MHz.
It would have shipped with 2 x 1GB with one on each Riser, but then to install a full set, move one, and install pairs on a Riser.
People have had bad memory show with half its correct amount. -
installed TREX 7... & connected to EP7... but now the http server in trex monitor is red...
iis is working...https://www.sdn.sap.com/irj/sdn/thread?threadID=71527&tstart=0
Here i will refer trex system installation dir as D:\usr\sap\trex_<instance no>.
1. Create Web Service extensions
Add a new extension name TrexHttpServer
Required files -
add - D:\usr\sap\trex_<instance no>\WebServer\TREXISAPIExt.dll
Set extension status to allowed
2. Create Application Pool - appPool_TREX_<trex instance number>
3. create website - SAP_TREX_<trex instance no>
path - D:\usr\sap\trex_<instance no>
application name - none
application pool - DefaultAppPool
4. Create a virtual Directory - "TREXHttpServer"
path - D:\usr\sap\trex_<instance no>\webserver
application name - TREXHttpServer
Execute permissions - Scripts and Executables
Application Pool - ApplPool_TREX_<instance no>
5. Right click on D:\usr\sap\trex_<instance no> and Choose Properties --> Security.
Add TREX user with full control and IUSR_hostname with read and execute permissions.
6. Open the TREX configuration file TREXWebServer.ini in D:\usr\sap\trex_<instance no> and change
the URL to <http://><trexserver>:<port>/TrexHttpServer/TREXISAPIExt.dll>
7. Open Dos prompt and execute command iisreset. THIS IS THE LINE
8.Stop and start the Trex Server.
9.Execute the url "http://<trexserver>:<port>/TrexHttpServer/TREXISAPIExt.dll?CMD=PING"
in browser and you should see "OK Server Connection".
10. Open Trex administration and you should see green light besides https server. -
Problem with TREX 7.0 : HTTP Server is not working
Hi all,
I have installed TREX 7.0 recently(Windows XP Pro, with IIS 5.1). I'm having portal installed in the same system(NW04s). After this installation I found that status of httpserver is red, rest all servers are having green status. I checked it in IIS, there also its indicating same(SAP_TREX_02 (Stopped)). I tried to connect http://<host-name>:30205/TREXHttpServer/TrexIsapiExt.dll, but its giving error as,
Error occurred when connecting to the server!
Description: Can't connect to the server.
Server: <host-ip>:30205
Additional info: Error code: 10061
Proxy+ 3.00 (Build #232), Date: Wed, 07 May 2008 19:11:59 GMT
I'm not able to get why http server is not able to get up. Please help me to resolve this problem. Waiting for some quick response.
Thanks in advance,
Ganpati JhaHi,
do you configured TREX server in EP ?
You must configure the TREX name server in Visual Admin, to point to TREX.
Your error message say "Server: <host-ip>:30205", what is <host-ip>? I think that is the problem, it must be your server name.
Check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/c7/e0d13f7fb44c21e10000000a1550b0/frameset.htm
(restar cluster after this)
regards,
Leandro
Edited by: Leandro Balboni on May 7, 2008 8:01 PM -
Red Light in Server.app Website Pane
Hi, newbie here. Am I doing something wrong in that I get this red light in the below screen shot? Confused.
https://dl.dropbox.com/u/451249/mdmimagehost/murraysorg.png
Thank you for any insight!Hi Matthew,
quick question - there is your server and its plugged directly into the internet modem ( no intervening router or nat translaltion and your server is doing nat and dhcp for your local network? Is that correct as per the line under ?
Internet <--> Modem in bridge mode <-> Server - with Internet IP Address
or is it ?
Internet <--> Modem / Router <--- > Server - with internal ip address
Re your questions - The Server name can stay, but the hostname should be something like familyserver.murray.org under network settings. because technically, "murray.org." is a Fully Qualified Domain Name. not Host Name! Its a convention to give a machine a name under the FQDN.
Also - No Green Light as opposed to a grey light when you enter your site under websites may mean - its kind of working, but you may get funny results - Try setting up as below and see how that goes, it will likely save problems in the long run.
Change the hostname in Server.app/Server/Network Settings to be a familyserver.domain.org style.
Then under DNS on server.app, the Primary Zone should be "murray.org".
Then add a Machine record to match the hostname - familyserver.murray.org
Then add a nameserver record in the zone - familyserver.murray.org
Then add an MX record in the zone for familyserver.murray.org
Then add an alias record in the zone for www
Then delete / re-add your website and you should get a green light.
cheers
Gerry -
TREX - Search Failure - HTTP Server error: 503 - Queue Server down
Hello,
I've got a problem with TREX, the following tasks results in erros:
Default Search
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Creating Index
Error 503
- On Index Administration: indexes status are green
- On TREX Monitor: Takes long time to loa. HTTP Server and Name Server are green. There is no entry for Queue Server
- On TREX Monitor > Display Queues: Takes a long time and then no queues are displayed
- On Portal Monitor > Request Overview: Requests for TREX takes pretty long time
Starting Time: 9:16:23 AM
Starting Date: May 19, 2010
Request Name: NW:J2E:SRV:HTTP
User ID: <my user>
Outbound Data: n/a
Duration: 395671
CPU Time: 5812
Component Entries: 26
Component with Largest Net Time: EP:KM:TREX:HTTP:<host>:30205
Largest Net Time: 38867
Component with Largest Net CPU Time: EP:PRT_render:.../com.sap.km.TrexMonitor
Net CPU Time: 5674
Could you help me with procedures or guides on how to solve the problem and start the queue server?
kind regards,
RafaelBASIS team reseted TREX and it's working again
-
IIS HTTP server does not start in Trex 7.1
Dear All,
I have IIS 7.0 installed on Windows server 2008 R2 + with Trex 7.1 rev 43, which has been inturn integrated with solution manager 7.0 Ehp1 sps26 (ABAP+JAVA).
IIS server installation is done after installation & configuration of Trex server
1) NOW IIS 7.0 HTTPS server is not working
My question is why should it is required to have ISS 7.0 http server running since I have not integrated Trex with Java Server, it is connected with the Service_Desk & dedicated two RFC named "IMSDEFAULT" & "IMSDEFAULT_REG" are configured to fetch & retrival of support message
in this case i have even tried "SAP Note 1483929 - TREXWebServer can not be restarted from TREXAdminTool" & "http://forums.sdn.sap.com/thread.jspathreadID=1635893"
2) I am able to search & save the Problem in Tx- IS01 but except 1 problem or ticket its not searching the any other ticket or problem in Tx-CRM_DNO_MONITOR--> solution database
Kindly Provide your input
Its Long Pending issues, Please help me to solve this issue ASAP.I have Oracle 9iAS installed but sometimes the HTTP server stops responding. it searches for all the .html files. but it can not find the .jsp files in the specified path. is there anything wrong with the apache configuration?
httpd.conf is perfectly alright.
It give the following error
Request URI:/testFile.jsp
Exception:
javax.servlet.ServletException: java.io.FileNotFoundException: ...\testFile.jsp (The system cannot find the file specified)
now what to do??
plz help
thanx
ketan malekar
([email protected]) -
Trex Index could not be created HTTP server error: 503 (Errorcode 7266)
Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharathhi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath -
Problem in starting sqlplus after installing http server only on red hat linux 7.1
I have installed http server on my pc. it was installed
successfully mt http server is running on port 7777 but when i
am trying to run sqlplus from user root
/home/oracle/OraHome1/bin > ./sqlplus
it's giving msg1<lang>.msb file not found.
error 6 intializing sql*plus
but i have seen that sqlplus/message directory has msg1us.msb
file . since sqlplus is a bin file otherwise i can change it's
path. i think so.
give expert suggestions
brajesh karnWhat about your envirnoment variables (ORACLE_HOME, ORACLE_SID,
ORA_NLS33) ? -
Trex6.1 http server service is not running
Hi all,
We installed SR1 with Trex.it worked fine.After that we upgrade to stack11.then Trex http server service is not working.We checked with TrexAdmin.py admin tool it showing red status.We tried all the options which was given in the Q&A of SDN forum.still no luck .we unistalled and installed again ,even though it is not working.any one can help to resolve this issue.
Thanks and Regards
GopalHi Nicholas
In the TREX admin view the HttpService is RED
I could not find any file by the name TREXHttpserver.ini
but i only found a file by the name TREXWebserver.ini. Is it the same ??
This is the content of the TREXWebserver.ini
[trace]
saptracelevel= 1
filename=trace/TrexWebServer
maxfilesize= 10000000
maxfiles= 10
default=error
WebServer=error
IdxProv=error
alertwriter= SimpleAlertWriter
alert= error
alertfilename= trace/TrexWebServerAlert
[HTTPSERVER]
URL=http://ind50038436:30205/TREXHttpServer/TREXISAPIExt.dll
certfile=
[global]
bDoNotConvert2IPN= yes
[ccms]
record= on
satracer=D:usrsaptrex_02/JarmLike
[satjarmlike]
file= trace/TrexWebServer.sat
# this section is only used in Apache web server module mod_trexhttp.so
[apache]
chunked=yes
onelog=yes
This is the content of the TREXNameServer.ini
[communication]
listenport=30201
maxchannels= 200
maxendpoints= 200
[trace]
filename= trace/TrexNameServer
saptracelevel=0
default= error
maxfilesize= 10000000
maxfiles= 10
performancetrace= off
alertwriter= SimpleAlertWriter
alert= error
alertfilename= trace/TrexNameServerAlert
nameserver= error
replication= error
tns_timing= error
assignment= error
[ccms]
record= on
satracer= JarmLike
[satjarmlike]
file= trace/TrexNameServer.sat
[pythontrace]
trace= off
tracefile= trace/tns_client
log_all=
[service]
workerthreads_0= 10
workerthreads_1= 1
printmethods= on
There is no trace file for HTTP service. There are only trace files for other services e.g. Nameserver, Indexserver etc...
Thanks in advance,
Maybe you are looking for
-
Can I block Mac Keeper pop-up adds from Safari web pages?
I have a 2008 MBP running Lion with Safari 5.1.1.1. On several web pages I open that contain adds, these stupid Mac Keeper adds continually appear. If possible, how can I block them from appearing?
-
Oldest open item overdue in Credit Mangement
Hi, We are carring out credit control at the sales order level and have specified the maximum limit foroldest overdue item as 10 days. The payment terms spcified at the sales order level is 20 days. Now the system is adding this 10 days to the payme
-
Stop the Billing Doc creation for error confirmation
Hello Experts, This is regarding the Billing issue. Our Service Process: We create the Service Process and also create the followup confirmations. For ex: I have created one SP and also created one followup two confirmations. The second Confirmation
-
How do I move photos around the album
I just began using i photo. Iam trying to drag some photos to the top of my album to put specific things together, Help!
-
TS1362 I get the first 10 or 15 seconds of each song and then it skips to the next
The problem is particular to one purchase - all the others are fine.