TREX 7.1 with EP6.0?
Hello
Does anybody know if TREX 7.1 is supported with EP6 (NW04)?
I'm sure TREX is backward compatable but is it officially supported?
PAM doesn't say much apart from 'TREX' - doesn't list version number..
thanks
Hi Simon,
TREX 7.0 can be used with EP-KM in NW2004 as well.
TREX 7.1 has not yet been released.
Regards, Karsten
Similar Messages
-
Is it posible to use TREX 7.1 with E-Commerce 5.0?
Hi All,
E-commerce 5.0 installation guides specifies using TREX 7.0. But We are facing issues, installing TREX 7.0 on Windows 64 bit platform as TREX 7.0 does not support Windows 64 bit platform.
Please can someone advice if we can use TREX 7.1 with E-Commerce 5.0
Scenerio is E-Commerce ERP edition. with backend R/3 4.6c.
Regards,
Dipender SinghHello Martin,
The E-commerce 5.0 guide for ERP, says that the minimum version supported is 4.6C with the specific patch level version. We had issues initially with the TREX 7.0 installation on 64 bit windows ( lot of modifications have to be done manually here).
But now TREX 7.0 is working fine and i can see the replication happeing from R/3 4.6C. We are configuring the webshops and doing all the XCM settings currently so, would be able to tell in a days time, if it works for us or not.(with 4.6C).
Thanks,
Dipender Singh -
TREX 7.0 with EP 2004?
Hi,
can I run TREX 7.0 with EP2004?
Thanks
NatalyaHi Natalya,
TREX 7.0 for SAP NetWeaver 7.0
Applications based on SAP NetWeaver 7.0 use TREX 7.0.
http://help.sap.com/saphelp_nw70/helpdata/EN/40/83505303bd5616e10000000a114cbd/frameset.htm
These applications can optionally use TREX 7.1 because each version of the TREX ABAP client and the TREX Java client is compatible with TREX 7.1. See below for TREX 7.1.
TREX 7.1 for SAP NetWeaver 7.0
Applications based on SAP NetWeaver 7.0 can optionally use TREX 7.1. Each version of the TREX ABAP client and TREX Java client that form part of the Application Server (AS) ABAP and Java works with TREX 7.1.
http://help.sap.com/saphelp_nw70/helpdata/EN/40/83505303bd5616e10000000a114cbd/frameset.htm
Thus, if your EP runs on NW2004s or NW7.0, then the above TREX version is possible.
Hope that helps.
Ray -
CV04N: Is it possible to JOIN TREX fulltext search with other data ?
Dear DMS gurus.
...in CV04N.
Is it possible to JOIN a TREX fulltext search with other data (e.g. document data, classification characteristics, object links,...) ?Dear Erik
Thanks for the good piece of Information you have shared.
Regarding the OSS note 1332745 it clearly says that
"SAP PLM Consulting integrated the TREX technology into the central search components of SAP DMS.
Searchable content:
- Main DMS attributes (e.g. document number, status or descriptions)
- Long texts
- Classification Data
- Originals (e.g. full text search on PDF, Excel or Word documents)
- Customer-specific content (e.g. append fields of DRAW, own tables, ...)"
In Think you should check this link
"https://www.sdn.sap.com/irj/scn/wiki?path=/display/plmcs/sapPLMConsultingSolutionsII" -
"Compatibility of the navigation of the People Centric CRM with EP6"
Hello all,
for which version of Business Package and which SP Portal 6.0. is SAP-Reference note: 659881 "Compatibility of the navigation of the People Centric CRM with EP6" valid.
We brought the note for portal 6.2.0.4 (BP 60.2.3) and
navigation functioned not.
Does anyone know this problem and can help me?
Thanks in advance
Best regardsHello Irene,
Go ahead and do as per the instructions given in the note. Download the zip file and proceed as instructed. Everything works fine. This note is applicable to the SAP Enterprise Portal 6.0 and any level of the support package.
Hope this helps..
Thanks,
Sunitha -
Cannot get ITS SSO to work with EP6 Sp15
I am having problems with SSO from EP6 to ITS (my EP5 to the same ITS works great).
This is what I have done.....
It is a R3 4.6C system so I wondered if any patches were needed....however I have got SSO working with the SAP Win GUI - so this tells me that the R3 system and the imported verify.der certificate is OK.
The connection test for ITS works - so this tells me the parameters in the System are correct.
The parameter mysapcomusesso2cookie is set to 1 - and this is the same ITS system that is used for SSO between the EP5 portal and R3....and it works in this case.
I have set only the following parameters in the System:
ITS Description = Test1
ITS Host Name = myportal.com:91
ITS Path= /scripts/wgate
ITS Protoco = http
Logon Method = LOGONTICKETS
Anything else I may be missing?
Thanks
PatrickHi
What mean "FQDN"?
I must 'dots' in my address..?
Bogdan -
TREX 7.0 with ECC6 (A+J) on same physical box
Hi,
We are building a eREC6 landscape. With below details.
1. EP7 system
2. TREX 7.0 and ECC6 (A+J) on windows 64 bit physical server with MS SQL server 2005.
This is for the eRecruitment 6.0 software solution landscape. This is just for demo and training purpose.
I will do the RFC and HTTP connection between ECC6 and TREX 7.0.
I will connect ECC6 system in portal for Single sign on.
Will you please tel me steps for TREX connectivity with ECC6.
Will you please tell me is there any other specific configuration we need to do for eREC 6.0 configuration in this landscape.
I am having setup guide for ECC6 and TREX 7.0 and even some material for eREC 6.0 but in this they have not given specific detailed document.
If possible please let me know any other steps I need to take for this.
Thanks and regards,
RipalHi Ripal,
as soon, as you have a search-specific issue, I might be able to help.
As long as you ask about eRec in general, please post to the appropriate ERP or HCM forum.
Regards,
Karsten -
TREX NameServer exits with code 128 on system start
Installed a new TREX server on Windows 2003 x64 server, using standard settings for a stand-alone TREX server. Installed as Local (not domain) and install completed successfully. After the install (or after any reboot), all the regular TREX services start up correctly except for TREXNameServer.exe.
Looking at the trace file for TREX Daemon, here is an excerpt:
[4084] 2008-11-06 12:01:18.093 i Daemon TrexDaemon.cpp(07478) : start TREXDaemon
[4084] 2008-11-06 12:01:18.274 i Daemon TrexDaemon.cpp(01969) : created shared-memory for NameServer (shm: Handle=0x268, size=16690888, mtx: Handle=0x230)
[4084] 2008-11-06 12:01:18.349 i Daemon TrexDaemon.cpp(05496) : start 'TREXNameServer.exe -port 30001' as process 2152
[4084] 2008-11-06 12:01:18.545 i Daemon TrexDaemon.cpp(06789) : process TREXNameServer.exe with pid 2152 exited with code 128
[4084] 2008-11-06 12:01:19.553 i Daemon TrexDaemon.cpp(05460) : child <TREXNameServer.exe> terminates too soon -> disabled
[4084] 2008-11-06 12:01:22.367 i Daemon TrexDaemon.cpp(05496) : start 'TREXPreprocessor.exe -port 30002' as process 2256
[4084] 2008-11-06 12:01:24.383 i Daemon TrexDaemon.cpp(05496) : start 'TREXIndexServer.exe -port 30003' as process 2296
[4084] 2008-11-06 12:01:29.363 i Daemon TrexDaemon.cpp(05496) : start 'TREXQueueServer.exe -port 30004' as process 4132
[4084] 2008-11-06 12:01:34.284 e Daemon TrexDaemon.cpp(04782) : creation of process '"python" alertserver.py' failed: The system cannot find the file specified.
[4084] 2008-11-06 12:01:34.284 i Daemon TrexDaemon.cpp(05498) : start 'python alertserver.py' failed
[4084] 2008-11-06 12:01:34.389 i Daemon TrexDaemon.cpp(05496) : start 'TREXCruiser.exe' as process 4176
If I log into the server as <sid>adm, run TREXConsole and then start TREXNameServer, it starts up fine and works without a problem. However, that doesn't start the Name Server as a service, preventing the unattended operation that one would hope for.
Has anyone encountered this before? I've searched all over, but have not located anything that is not allowing the Name Server to start. I would appreciate any suggestions to help track down this problem. Thanks.
TREX Version: 7.10.14.147693
Windows 2003 Server x64 SP2 with vcredist64, JRE installedHi Jones,
It turns out my issue was related to security on the Windows drive in question. I installed the TREX main directory on the E drive of the server and simply added the "Users" group to that drive to fix my problem. I'm pretty sure that the service user SAPService<SID> was having access permission issues until I added the group to the security settings of the drive. -
Adding an HTTP Connection to TREX previously installed with RFC Connection
Hi All,
On an existing TREX installation (7.0) with a RFC connection configured, is it possible to add an HTTP connection, or is it necessary to re-install the TREX with both connections?
Thanks,
LizHi Liz,
No, it should not be necessary. If you are using a Windows system you'll finde more info on [SAP Help|http://help.sap.com/saphelp_nw04s/helpdata/en/ef/50688acaa0ff4aa23a23e74e8c9e73/frameset.htm].
Kind regards,
Roland -
Deployment Error on PDK 60.14.0 With EP6 SP16
Hi,
i've a problem deploying pdk 60.14.0 on our ep6 sp16 on MaxDB.
First i've updated ep6 from sp9 to sp16. Then i tried deploying the pdk using sdm, but it stopped at 93% without any hints. I didn't noticed that my log volumes had run full so i stopped sdm and began searching. ok, log volumes full, added another volume and tried the deployment again. that's where my problem began.
I started the normal deployment process again. It skipped the allready deployed packages but failed on the missing ones with the following error message:
ERROR: Not deployed. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.pdk..
Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.pdk.epa: The following objects could not be locked: [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk|pcd_service], [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Pages|pcd_service],
[pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Pages/com.sap.pct.pdk.supportdesk|pcd_service], [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles|pcd_service], [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper|pcd_service], [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.navigationconnectortestrole|pcd_service], [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/edmexample|pcd_service],
the list goes on and on...
[pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_CRSDESCR|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_DEPARTMENT|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_EMPLOYEE|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_EMP_SKILL|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_SKILL|pcd_service], [pcd:Business_Objects/pdk/PDKDummySystem.Google|pcd_service], [pcd:Business_Objects/pdk/PDKDummySystem.PDKDummyObjectID|pcd_service]
at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchive(PackageDeployServiceImpl.java:215)
at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchives(PackageDeployServiceImpl.java:363)
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:163)
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:223)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:598)
... 12 more
For detailed information see the log file of the Deploy Service.
06/03/07 16:55:04 - ***********************************************************
Mar 7, 2006 4:55:04 PM Info: End of log messages of the target system.
Mar 7, 2006 4:55:04 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Module) *****
Mar 7, 2006 4:55:04 PM Error: Aborted: development component 'com.sap.pct.pdk'/'sap.com'/'SAP AG'/'630.20050912154538.0000', grouped by software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
Caught exception during module deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.pdk..
Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive .\temp\deploy\work\deploying\com.sap.pct.pdk.epa: The following objects could not be locked: [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk|pcd_service], [pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Pages|pcd_service],
the list goes on and on...
[pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_CRSDESCR|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_DEPARTMENT|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_EMPLOYEE|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_EMP_SKILL|pcd_service], [pcd:Business_Objects/pdk/LocalMaxDB.SAPJ2EDB.BC_EDM_SKILL|pcd_service], [pcd:Business_Objects/pdk/PDKDummySystem.Google|pcd_service], [pcd:Business_Objects/pdk/PDKDummySystem.PDKDummyObjectID|pcd_service]
at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchive(PackageDeployServiceImpl.java:215)
at com.sap.portal.transport.deploy.PackageDeployServiceImpl.deployArchives(PackageDeployServiceImpl.java:363)
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:163)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineSingleModuleOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Mar 7, 2006 4:55:11 PM Info: Starting: Initial deployment: Selected software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343' will be deployed.
Mar 7, 2006 4:55:11 PM Error: Aborted: software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
No further description found.
Mar 7, 2006 4:55:16 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
I tried undeploying the allready deployed packages and then deploying from the beginning but got the same errors.
At this point i'm clueless. Why is it that the objects can't be locked? What do i have to do??
Please help!
Thanks in advance,
OliverHi Oliver,
I got the same problem when using NWDI to transport portal epa files.
Please check if the sda/sca file is available on the target system.
Best regards
Michael
btw: if you got a solution please send some infos about "how to" -
Challenges with the TREX Stack 14 with Windows 2003 Server
Hi
I have been struggling with the TREX installation on Windows 2003 server and are note able to get the green icon for the HTTP server.
I have been searching this Forum and seen a lot of topics on this issue, but unfortunately I am not able to solve it.
On my server I have installed the following components:
EP stack 14
SAP R/3
SAP ITS
If anyone have any ideas of how to solve my case - I will be very pleased
Regards
Kay-Arne S. AarlieHi
We have managed to solve this issue
First i set the security settings for my trex_instance folder "C:\usr\sap\trex_06". Here i added the user IWAM_"MyHost" which is the "Launch IIS Process Account". Gave it the permissions for "Read & Execute, List Folder Content, Read" and then hit the button "Advanced" - selected the user once more and "Apply" - "OK" - "OK".
In the IIS and its properties for Web Sites and Services i set the checkbox for "Run WWW service in IIS 5.0 isolation mode".
Restarted the IIS and the TREX HTTPServer went green and I was also able to use the ITS.
Regards
Kay-Arne -
CRM 3 ISA 3.1 & IPC 3.0 are they working with EP6 NetWeaver?
Hi everybody,
Actually we have E-selling (CRM 3,ISA 3.1 & IPC 3.0) that working with EP 5.0 SP5,I'm just wondering If we upgrade to EP6.0 NetWeaver can we just migrate iViews or we have to upgrade to CRM 4.0, ISA?, IPC?, too.
Thanks
MaryamMaryam, Netweaver should be downward compatible so I do not see any issues. If you want to be sure just create an OSS message. Tiest.
-
TREX: Preparation Failed with return code 14047
Dear all,
For files bigger than 15 MB Indexing is not happening. Document status is "Preparation Failed".
We are on EP 7.0 SP 16, TREX 7.0.
How can we solve this problem?
Best Regards,
Aparnna PrasadDear Aparnna,
please check the version of the TREX you use (file TREXVersion.html). If the TREX is older than Rev 30 update to the newest one because of the new filters version.
Correct the following:
go to the /usr/sap/<SID>/TRX<Nr>/exe (you need to set the TREX environment with TREXSettings.sh first) and execute :
filter.x <file name> <otuputfilename.htm> for example:
filter.x /path/to/file.xls /path/to/file.xls.htm
What's the size of the output file? If it's more than 20 MB
please increase parameter maxfiltersize (TREXFilter.ini) and index document again.
Regards,
Tushar -
Configure TREX 6.1 for EP6 SP12
Dear Friends,
We have EP6 SP12 installed on windows 2003 server. We have just installed TREX 6.1. I dont get to see the TREX configuration within portals. I suppose the configuration should lie under System Administration -> System Configuration -> Knowledge Management -> Content Management -> TREX. I dont see TREX under Content Management. Can someone guide me where to configure TREX within portals?
Thanks,
J.DAfter installing, You shold configure indexes, crawlers, repositories etc.
All configuration could be found in "System Administration -> System Configuration -> Knowledge Management -> Index Administration" and "related links" section in that area.
You can also check this: http://help.sap.com/saphelp_nw04/helpdata/en/e2/9c7de32a3984429607de7e1b519a09/frameset.htm
and this: http://help.sap.com/saphelp_nw04/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Hope this helps
DK -
TREX indexing problem with PDF files
Hi all,
I use KM to access DMS with the "DMS Connector for KM".
I create an index on my DMS repository.
I have more then 8000 documents. Most of then are PDF files.
Only word document are indexed.
i have read and put in place OSS Note 1008299 and 1031193.
I have error message in trc file TrexPreprocessor :
[4648] 2009-08-27 17:12:21.969 e preprocessor Preprocessor.cpp(00963) : HTTPGET failed for URL http://rixsapfps.sbbio.be:52400/irj/go/km/docs/DS/EDIPUBLICROOTFOLDER%23ZFL%23000%2300/DMS_030%23ZFL%23000%2300/DMS_030_SOP%23ZFL%23000%2300/DMS_030_SOP_50%23ZFL%23000%2300/0000000000000009000005363%23SOP%23000%230249871722A5F41746E1000000C14A8425.pdf with Httpstatus 500
[4648] 2009-08-27 17:12:21.969 e preprocessor Preprocessor.cpp(03553) : HANDLE: DISPATCH - Processing Document with key '/DS/EDIPUBLICROOTFOLDER#ZFL#000#00/DMS_030#ZFL#000#00/DMS_030_SOP#ZFL#000#00/DMS_030_SOP_50#ZFL#000#00/0000000000000009000005363#SOP#000#0249871722A5F41746E1000000C14A8425.pdf' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)
Any help is welcome.
PascalDear
Please refer
https://forums.sdn.sap.com/thread.jspa?threadID=1058626
https://forums.sdn.sap.com/thread.jspa?threadID=403393&messageID=3429730#3429730
Regards,
Tushar
Maybe you are looking for
-
No prompt to update when Flash Player Settings Manager is set to check for updates automatically
My understading of http://forums.adobe.com/message/3562892#3562892 (March 2011) is that when an outdated version of the Player is used on Windows, the prompt to update should occur after the next restart of the operating system. So, when http://www.a
-
HP 6185us, configuring 6 channel sound output
Hello there, Can someone please tell me if its possible to configure my laptop (HP 6185) with the IDT High Definition Audio card, to output 5.1 sound. Currently i configured it as 3.1, with only front speakers, center and subwoofer. But of course i'd
-
help please
-
TS2446 my ipad is disabled cant open my ipad
I have a problem to open my Ipad 2 is stated ipad is disabled could you please help me for that
-
Hai all, I am working in HR smartforms. I customized the below forms.Do we have any place in the config where u can tell the system to pick the z-form instead of std?? I know If it is not HR we can do it in NACE.But these are HR smartforms. HRRCF_CS_