TREX Commands

What are TREX codes or TREX commands(in context of Key Figures)?

Hi Suprio,
You can refer to - Syntax for TREX commands used in key figure calculation definitions
Regards,
Aditya G

Similar Messages

  • TREX command line control

    Good day to all.
    Can I freeze queue in TREX from command line?
    Thanks,
    Alexey

    The CommandLine tool is also shipped with JCAPS and which is very useful to tool.
    We can do deploy, redeploy and undeploy with this tool. and the respective docs are available as said in the above location.

  • TREX Installation, Error in phase - Install TREX web resources and finalize

    Hello,
    Platforms:
    SO - Win 2008 (R2) X64
    During the last phase "Install TREX web resources and finalize instance" in installation process of TREX 7.1, it show me a weird error...
    It seems that was some problem during the creation of sap start service of this new instance... but that is weird because I checked at services.msc and that service SAPTSM_02 and nothing seems wrong with it, it seems that was well created and it is in Started mode!... I checked firewall settings (all of them are in OFF status), I also checked CUA settings (is stopped)...
    I searched for this error and I found the following SDN forum:
    SAPNW EHP1 SR1
    I already press the retry button but it always show me the same error.
    During this phase the SAPInst window show some information and in there I see this two:
    creating sap start service of instance TSM/TRX02...
    service not correcttly installed.
    It is very weird thing!
    I will post some log files such as sapstartsrv.exe and sapinst.log.
    sapstartsrv.exe:
    Test call to Service failed: 80080005
    CO_E_SERVER_EXEC_FAILURE: Server execution failed
    Service not correctly installed
    sapinst.log:
    INFO 2012-01-20 16:29:24.446
    Creating file C:Program Filessapinst_instdirNW702STANDALONETREXCIsapstartsrv.exe.log.
    INFO 2012-01-20 16:29:24.457
    Output of F:usrsapTSMTRX02exesapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
    WARNING 2012-01-20 16:31:41.182
    Execution of the command "F:usrsapTSMTRX02exesapstartsrv.exe -stdin" finished with return code -1. Output:
    Test call to Service failed: 80080005
    CO_E_SERVER_EXEC_FAILURE: Server execution failed
    Service not correctly installed.
    ERROR 2012-01-20 16:31:41.380
    MOS-01011  'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
    ERROR 2012-01-20 16:31:41.381
    MOS-01011  'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
    ERROR 2012-01-20 16:31:41.470
    FCO-00011  The step createService with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|createService was executed with status ERROR ( Last error reported by the step :'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.).
    Can you help me please, how can I solve this?
    Kind regards,
    JDimas

    Hello Arjun Venkateswarlu,
    1).Is your Windows Firwall is enabled ? Disable the windows Firewall and also restart SAPinst
    - As I said the windows firewall is disable (OFF)
    2). Make sure that <sid>adm belongs to the local admins or Better provide the domain admin rights to the id which you are using for installation if it is domain installation.
    - All the created users during this installation belongs to local admins. This isn´t a domain installation!
    3). Try Restarting the installation by stopping and starting Windows and restart SAPINST and coninue Old Installation again.
    - I already did that... but it continues to show me the same error!
    Any other tip?
    Kind regards,
    JDimas

  • Copy command not working for Search Results

    Hello,
    We have a Search Form that triggers a  TREX URL search.  We also add a custom Layout Set on the search URL.  (see URL below)
    <b>URL Search:</b>
    http:
    <server name> &ConfigFileName=Navigation.xml&layoutSetMode=exclusive&ResourceListType=com.sapportals.wcm.SearchResultList&SearchType=ctrlpers&QueryString=*&rndLayoutSet=CustomLayoutSet&SelectedMatchesPerPage=15&SearchVisible=false
    In the custom Layout Set, we've made our own UI command group to include the following commands:  Search_from_here, details, copy, move etc…
    The problem is that whenever we click on the 'Copy'  or 'Move' command of a resource, we get the following error message:
    =====================================
    Item not found       
    The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.     
    ======================================
    The error message in the KM log files simply states "ERROR: RID not found".
    Would anyone know how to fix this issue!  I've tried many layout sets, but the copy command always gives me the same error message!
    Any help or suggestions on this would be much appreciated...
    Thanks,
    Harman

    Hi Harman,
    yes, this is a known issue.
    It's fixed with NW04 SPS 13.
    Regards Matthias Röbig-Landau

  • TREX 7.1 IIS logon failed http service start failed

    TREX 7.1 Rev 36 wurde in folgender Systemumgebung installiert:
    Windows Server 2008 R2 Standard (64 Bit)
    Java: Sun JSE 1.4.2 64bit (1.4.2_25 Rev b02)
    Umgebungsvariablen JAVA_HOME=C:j2sdk1.4.2_25-x64 gesetzt bzw. PATH ergänzt
    um C:j2sdk1.4.2_25-x64jre in
    IIS 7.5 wurde installiert
    Problem: Beim Schritt "Configuring the TREX Web Server" (Seite 48f.) bleibt der Service "httpserver" als einziger im roten Zustand.
    aptrex01  31005   httpserver   -     http.//aptrex01:31005/TREXHttpServer/TrexlsapiExt.dll
    Ein Restart-Versuch ergibt:
    "Restarting the http service finished:
    TREXIISCtrl.exe -ul -iisrestart /tns:aptrex01:31001
    IIS logon failed. Wrong sidadm password used by TREXIISCtrl.exe
    or no sidadm password stored in TREXIISCtrl.exe.
    HttpServer could not be restarted."
    Die SAP-Hinweise 1423381, 1008299 und 1029783 sind bekannt.
    1423381: IIS 6.0-Kompatibilität wurde nachinstalliert
    1008299: der IIS wurde bislang noch NICHT in den 32-Bit-Modus gesetzt
    1029783: die beiden Dateien msvcp71.dll und msvcr71.dll waren zwar nicht im angegebenen exe-Verzeichnis zu finden, wurden aber von C:TEMPClt-InstSystem32 (Datum 12.01.2010) in die aufgeführten Verzeichnisse kopiert.
    Der Blog /people/bettina.knauss/blog/2006/12/11/trex-admin-tool--troubleshooting-if-httpservice-is-not-running ist bereits bekannt (Bettina Knauss), ebenso dieser SDN Thread:
    (CRM2007 to Trex server issue).
    Mit freundlichen Grüßen
    Rüdiger Höckel
    apetito AG
    SAP Basis

    Hi Mark,
    I know the SAP Note 1483929. When I execute the command it breaks.
    \usr\sap\TXD\TRX03\exe>trexiisctrl -ul -storeprops  /ap:<PASSWORD>  /sp:<PASSWORD> /tns:txdci:30305
    Environment variable DIR_EXECUTABLE not set, using SAP_RETRIEVAL_PATH/.. as fallback
    SAPLOCALHOST='txdci'
    SAPSYSTEMNAME='TXD'
    SAPSYSTEM='03'
    SAP_RETRIEVAL_PATH: 'I:\usr\sap\TXD\TRX03\txdci\'
    TARGET: 'I:\usr\sap\TXD\TRX03\txdci\'
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.
    Kind regards,
    Roland

  • SLD registration for TREX not working...

    SDN Members,
    I am unable to register TREX in SLD. I have put in an OSS message; however, I have yet to receive a response back from SAP... So any help would be much appreciated.
    Thanks,
    -Patrick
    Steps for the Reconstruction 
    1. Generate SLD Configuration file:
    sldreg -configure /usr/sap/TXD/TRX85/slddest.cfg
    2. Copy the SLD Config. File to the Global SLD Directory and run
    command (to transfer data to SLD):
    saposcol -b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd
    Receive the following:
    (hostnames, ip's, and ports altered to protect the innocent)
    prtdiag can only be run in the global zone
    Thu Dec 27 10:33:04 2007 SLD Registration Program [2.0]  (May  8 2006) [None Unicode]
    Thu Dec 27 10:33:04 2007 No XML data input file set. Will read input data from standard input.
    Thu Dec 27 10:33:04 2007 Supplier Name: ComputerSystem / Supplier Version: 1.0 / Supplier Vendor:  / CIM Model Version: 1.3.21
    Thu Dec 27 10:33:04 2007 Group:
    Thu Dec 27 10:33:04 2007 Group name system1
    Thu Dec 27 10:33:04 2007 validateAttributes OK
    Thu Dec 27 10:33:04 2007 Property Status
    Thu Dec 27 10:33:04 2007 Value OK
    Thu Dec 27 10:33:04 2007 Property NameFormat
    Thu Dec 27 10:33:04 2007 Value IP
    Thu Dec 27 10:33:04 2007 Property Caption
    Thu Dec 27 10:33:04 2007 Value hostname01
    Thu Dec 27 10:33:04 2007 Property Name
    Thu Dec 27 10:33:04 2007 Value usahstxutxd01
    Thu Dec 27 10:33:04 2007 Property IPAddress
    Thu Dec 27 10:33:04 2007 Value X.X.X.X
    Thu Dec 27 10:33:04 2007 Property OpSysReleaseName
    Thu Dec 27 10:33:04 2007 Value SunOS
    Thu Dec 27 10:33:04 2007 Property OpSysCategory
    Thu Dec 27 10:33:04 2007 Value Solaris
    Thu Dec 27 10:33:04 2007 Property VendorRelease
    Thu Dec 27 10:33:04 2007 Value SunOS 5.10
    Thu Dec 27 10:33:04 2007 Property CPUType
    Thu Dec 27 10:33:04 2007 Value sun4v
    Thu Dec 27 10:33:04 2007 Property MachineCategory
    Thu Dec 27 10:33:04 2007 Value SPARC
    Thu Dec 27 10:33:04 2007 Property OpSysBits
    Thu Dec 27 10:33:04 2007 Value 64
    Thu Dec 27 10:33:04 2007 Property NumberOfCPUs
    Thu Dec 27 10:33:04 2007 Value 32
    Thu Dec 27 10:33:04 2007 Property CPURate
    Thu Dec 27 10:33:04 2007 Value 1200
    Thu Dec 27 10:33:04 2007 Property PhysicalRAMInMB
    Thu Dec 27 10:33:04 2007 Value 65528
    Thu Dec 27 10:33:04 2007 Property VirtualRAMInMB
    Thu Dec 27 10:33:04 2007 Value 87224
    Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
    Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
    Thu Dec 27 10:33:04 2007 HTTP trace: false
    Thu Dec 27 10:33:04 2007 Data trace: false
    Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
    Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
    Thu Dec 27 10:33:04 2007 *** Start SLD Registration ***
    Thu Dec 27 10:33:04 2007 Used URL: http://hostname01:50000/sld/ds
    Thu Dec 27 10:33:04 2007 HTTP open status: true - NI RC=1
    Thu Dec 27 10:33:04 2007 HTTP send successful.
    Thu Dec 27 10:33:04 2007 Return code: 401 --- Return message: (Unauthorized)
    Thu Dec 27 10:33:04 2007 HTTP response: Failure. HTTP status code: 401
    Thu Dec 27 10:33:04 2007 *** End SLD Registration ***
    Thu Dec 27 10:33:04 2007 Data send status: false
    Consequently SLD is not updated with TREX information. Using IE I can go to
    the url http://hostname01:50000/sld/ds , get popup asking for
    credentials (we log in using SLDDSUSER account - w/ Basis Admin level
    auth.), and we receive: Page Cannot be displayed (HTTP 400 - Bad Request
    Internet Explorer ).
    If we go to http://hostname01:50000/sld and login with the same
    account (SLDDSUSER) we see the full SLD Toolset.
    Edited by: Patrick Riggins on Dec 27, 2007 6:06 PM

    UPDATE:
    We were able to work through and
    resolve the error we initially posted in this Thread. Now we run sldreg
    and all looks good; however, we are seeing nothing in SLD (on our XI
    System) even after stop/restart of SLD Server:
    Steps for the Reconstruction 
    1. Generate SLD Configuration Files:
    sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
    2. Copied files to Global SLD
    /sapmnt/TXD/global
    3. Run command to transfer data to SLD:
    saposcol -b | sldreg -user <user acct> -pass <password> -host
    <hostname> -port <port #> -datatrace -httptrace -
    logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
    Looks successful:
    Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
    Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
    Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
    Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
    Thu Dec 27 20:31:06 2007 Data send status: true
    However in SLD , under content maintenance selecting "All With
    Instances" in the dropdown list and "Class" , no TREX Services showing.
    And no technical system showing for TXD (TREX System)

  • TREX httpserver red in TREX admin console after install v7.0

    I have installed TREX version 7.0 and the httpserver is red in the Services tab of the admin console. When I try to restart it it states "Access Denied, you must be an administrator of the remote computer to use this command."
    I am positive that the tsxadm id that I am using is an administrator, since I have checked. Is it trying to use a different id that I am unaware of?
    Any help would be greatly appreciated.
    This is on a windows 2003 server SP1 with IIS 6.0.
    Thanks
    Paul

    Apparently it was a DCOM error that seems to be fixed after implementing MS KB Article 913119 since I can now restart the server. However it is still in red and has the following error in the trace file:
    [2156] 2007-10-30 10:30:35.774     e     NameServer     TREXNameServer.cpp(00833) :     Wrong response from http server: http://qbw02vl1:30305/TREXHttpServer/TrexIsapiExt.dll, status:200, response: MZ&#65424;

  • Install CCMS on TREX (7.1) landscape

    Hi,
    I have installed a TREX 7.1 landscape (on Windows server).  On the master server, CCMS/GMRG have been installed/configured (and CCMS receives the info from the TREX) --> ok
    In order to get information on the 2 slaves servers (GMRG), i have tried to install saposcol (ok) and ccms as well.  Then i get a problem when launching the python script (python ccms_config.py u2013grmg)
    --> the system cannot access the ...SYS\profile folder (and update the profile files).
    Reason : on the slave servers, there is a "SYS" folder which is, in reality, a "shortcut" that is "mounted" to <master server>\....\SYS folder.
    --> in a command prompt, the "shortcut folder" is not reachable (means it cannot read the info from the SYS folder (on the master trex server)
    I am then wondering which action i could try ? (this problem should not exist in Linux, due to the principle of mount folder... that makes the target folder location "invisible" for the local host system)
    Thx for comment/idea.
    Denis
    Edited by: Koen Matthijs on Apr 29, 2009 3:09 PM

    I had the same problem on Mandrake 8.0. Just hit the cancel or
    stop button and restart it. The second run completes fine.

  • Problem installing Trex 7.0on NW2004s SR1

    Dear friends,
    Iam trying to install Trex 7.0on NW2004s SR1(Red Hat Linux 4.0).
    1st time When I tried to install Trex 7.0on NW2004s SR1: on 2nd screen when it asked me to give the location of Trex CD then by mistake I gave the location of Trex 7.0 SR2 instead of Trex 7.0 SR1 thats why system thew some error & then I stoped the installation.After that I got the correct CD & again started the installation by running the sapinst file with command ./sapinst but this time it was showing me the following error on 1st screen itself instead of asking for the Trex 7.0 CD.
    Error is :
    NFO 2007-09-17 19:14:30
    Working directory changed to /tmp/sapinst_exe.26782.1190036495.
    INFO 2007-09-17 19:14:30
    Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
    INFO 2007-09-17 19:14:30
    Working directory changed to /tmp/sapinst_exe.26782.1190036495.
    INFO 2007-09-17 19:14:30
    Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
    INFO 2007-09-17 19:14:31
    Working directory changed to /tmp/sapinst_exe.26782.1190036495.
    INFO 2007-09-17 19:14:31
    Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
    INFO 2007-09-17 19:14:31
    Working directory changed to /tmp/sapinst_exe.26782.1190036495.
    INFO 2007-09-17 19:14:31
    Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
    INFO 2007-09-17 19:14:32
    Copied file '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/keydb.xml' to '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/keydb.1.xml'.
    INFO 2007-09-17 19:14:32
    Creating file /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/inifile.xml.
    INFO 2007-09-17 19:14:32
    Copied file '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/inifile.xml' to '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/inifile.1.xml'.
    INFO 2007-09-17 19:14:32
    Execute step FillCIContext of component |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0.
    INFO 2007-09-17 19:14:33
    Working directory changed to /tmp/sapinst_exe.26782.1190036495.
    INFO 2007-09-17 19:14:33
    Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
    INFO 2007-09-17 19:14:33
    Execute step initInstallation of component |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0.
    INFO 2007-09-17 19:14:33
    Working directory changed to /tmp/sapinst_exe.26782.1190036495.
    INFO 2007-09-17 19:14:33
    Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
    INFO 2007-09-17 19:14:33
    Account 0 already exists.
    ERROR 2007-09-17 19:14:33
    File not found: //TREX/COMMON/TREX.txt
    ERROR 2007-09-17 19:14:33
    File not found: //TREX/COMMON/TREX.txt
    ERROR 2007-09-17 19:14:33
    FCO-00011  The step initInstallation with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|initInstallation was executed with status ERROR
    If anybody knows the solution pls reply I'll be realy thankfull & will Reward with good Reward points.
    Thanks in Advance,
    Sunil Maurya.

    Solution
    Download The OS independent part for the TREX from SAP Marketplace (service.sap.com/swdc).
    Support Packages and Patches->SAP NetWeaver->SAP NETWEAVER 2004s->TREX->TREX7 ->#OS independent->TREXZZZZZZZZZZ.SAR

  • Trex installation error

    hello friends,
    iam doing trex installtion in my local system, it's in installwebserver and trex webpages. i got bellow error:
    TRACE      [synxcaccmg.cpp:648]
               CSyADsPath::fromString(SAP_ALL\IIS_WPG)
    Account SAP_ALL/IIS_WPG has ADS path 'WinNT://SAP_ALL/IIS_WPG'
    TRACE      [synxcaccnt.cpp:571]
               bool CSyAccountImpl::do_isMember(IUnknown* pAccount, iastring sName) const
    INLD50044610A\rajadm is not member of group "SAP_ALL\IIS_WPG"
    TRACE      [synxcaccmg.cpp:648]
               CSyADsPath::fromString(INLD50044610A\rajadm)
    Account INLD50044610A/rajadm has ADS path 'WinNT://INLD50044610A/rajadm'
    TRACE      [synxcgroup.cpp:425]
               void CSyGroupImpl::addMember(PSyAccount pAccount)
    IADsGroup::Add: HRESULT = 0x8007056b
    ERROR      2008-02-15 17:06:41 [synxcgroup.cpp:426]
               void CSyGroupImpl::addMember(PSyAccount pAccount)
    FSL-01006  Unable to add account <#0> to group <#1>. <#2>
    TRACE      [iaxxejsbas.hpp:270]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown std::ESyException: ESAPinstException: error text undefined
    TRACE      [iaxxcwalker.cpp:301]
               CDomWalker::processStep()
    <html><head></head><body><p>An error occurred while processing service <b>SAP NetWeaver '04 SR1> SAP System Installation> Search and Classification (TREX)> TREX Instance Upgrade / Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul><p>Log files are written to <b>C:\Program Files\sapinst_instdir\NW04\PATCOL640\WEBAS630\IND\TREX\MAIN</b>.</p></body></html>
    pls help me out in this issue.
    points guaranteed..
    regards,
    venkat

    Hi Rich,
    Thanks for the reply. I tried whatever you have said. After executing the command "G:\usr\sap\trex_02\TREXDaemon.exe -f G:\usr\sap\trex_02\TREXDaemon.ini", instead of MSVCP60.DLL missing, I got
    "An instance of this service is already running.
    You should consider checking if the process with the id 2548 is running and of type TREXDaemon. If you are sure that there is no instance alive remove the file G:\usr\sap\trex_02\lock\[email protected] and restart." and also I have the MSVCP60.DLL file under C:\WINDOWS\system32. My EP is on Windows Server 2003 Enterprise Edition.
    I removed [email protected] and restarted. I am still getting the same error "Index could not be created; creating index failed: HTTP server error: 502 (Errorcode 7266)". I am still not able to create an index. While TREX installation i have a first_test_index created succesfully. But No index Server is Displayed in TREX Monitor. While performing Serach I get No Search Index could be found.
    Rich could you help me out.
    Thannks and Regards,
    Piyush

  • Strange TREX behavior: Document search only shows 15 results

    Hi.
    I've one TREX implementation. It's connected to a SAP eLearning repository in a Portal and no matter what search criteria I use, it always returns me a list of 15 found resutls!
    It's always the same number, for different searchs, and of course I've checked that there are more than 15 right resutls, so it looks to me like a parameter restriction or something like this, but I still havent found it.
    Do any of you know what could be causing this??
    Any help would be really really appreciated.
    Thanks in advance and regards!!!

    Hi Armando,
    the reason that the portal shows every time only 15 results can depend on the used KM Layout Set.
    Within the KM layout Set which is assigned to the search result iView you can specify the number of rows and whether a page link sould appear or not.
    Normally the default Layout Set should work properly.
    But you can as well use the search command in the standalone tool TREX-Admin. Here you can see the number of results as well.
    Best regards
    Frank

  • Trex cannot start TREXAdmin.sh (display error)

    Hello  we have trex  version  7.10.55.00   on linux x64  installed .
      To get to the  admin screen with    TREXAdmin.sh   I first start up attatchmate Reflextion x (version 14.05)
      Then do en export of my ip address
          export DISPLAY=01.02.345.678:0
    Then run the  TREXAdmin.sh   command and the admin screen works ok
    I just  installed a new version of trex   on linux X64    7.10.61.00  and when I try to access
      TREXAdmin.sh       I get the following :
    Starting TREXAdmin on display 10.50.123.456:0, please wait.
      Traceback (most recent
    call last):
        File "<string>", line 1, in ?
        File
    "/sapmnt/D19/exe/nuc/linuxx86_64/TREX_7.10.61.395713/python_support/TREXAdmin.py",
    line 2690, in main
          root = Tk.Tk()
        File
    "/usr/sap/D19/TRX05/exe/Python/lib/python2.4/lib-tk/Tkinter.py", line
    1569, in __init__
          self.tk = _tkinter.create(screenName,
    baseName, className, interactive, wantobjects, useTk, sync, use)
      _tkinter.TclError:
    couldn't connect to display "10.50.123.456:0"
    I have found 1 pc  (vista with same version of reflection x) where it works ok and  a windows server  that also works.
      I did some compares of the reflection x settings but have not found any difference.  any ideas?

    Hello,
    Please check on which port the xmanager is listening, for example from your log it shows as "10.50.123.456:0" make sure your xmanager tool also shows '0' as the port.
    Thanks,
    Regards,
    Yoganand.V

  • Trex "synonym search" and  taxonomy "search from here" issues

    Hi Trex experts
    I have two minor issues regarding Trex and Taxonomies
    <b>Taxonomy</b>
    I have created a Taxonomy and need to add the “search from here” function so it’s possible to create a more specific search from within one are of the taxonomy.
    When I add a layout set where this command is enabled then it’s not shown.
    I guess that it’s my repository manager for the Trex repository that I need to add a service to, but I can’t figure out which one, or is this feature not possible for taxonomies?
    <b>Trex</b>
    Is it possible to define “synonym” search entries? Like I need to create a dependency on a bunch of terms, like when a user for example search for “vacation” then search for “holiday” should be included automatically in the search result as well. Is there some kind of configuration file where I can add a list of dependencies?
    Thanks in advance
    Regards
    John

    Hi John,
       Related to synomym you should read this material:
    "How to Enable Semantic Search or Search for Synonyms in TREX"
       Related to taxonomy, the answer is yes it is possible.
    If "search from here" botton is not shown, is due to you don't create an index (search option).
    Patricio.

  • TREX upgrade - Export Error

    Hi,
    I am in the process of upgrading TREX from TREX 6.1 to TREX 7.0 Rev 50 on the same same host as of old TREX system.
    Did installed TREX Rev 50. Now trying to do export of all indexes from old TREX but getting the following error:
    command: python exportHost_61_70.py /usr/sap/AA1/oldtrx.zip /tmp
    Error:
    'import site' failed; use -v for traceback
    Traceback (most recent call last):
      File "exportHost_61_70.py", line 1, in ?
        import re, socket, fuzzypy, string, os, sys, time, zipfile
    ImportError: No module named re
    Did python -v and following is the output;
       python -v
    'import site' failed; traceback:
    ImportError: No module named site
    ActivePython 2.1.3 Build 217 (ActiveState Corp.) based on
    Python 2.1.3 (#1, Sep 11 2003, 14:31:34) [C] on aix5
    Type "copyright", "credits" or "license" for more information.
    Is there something i am missing ?
    Thanks,
    Murali.

    Closing this thread, since environment variable was not set properly as said in the guide.

  • TREX indexing error

    Hi people, I'm trying to create an index in EP 6.40 SP18 but when created, the following error appears if I try to reindex:
    Wrong operation clearing index failed:QS error: queue not cleared;location=hermes:31003,index=inox_bd_om (Errorcode 6030)
    I've checked in TREX monitor that all the component are green, so any idea what could be the reason? (I also have checked in Visual Administrator that server name and port are ok in TREX service).
    Thanks to all!
    Jesús Ruiz

    Jesús Ruiz,
    It looks like the clear queue command is failing.  What happens if you clear the queue using TREXAdmin on the TREX OS?  In the queue topic select the queue and right click one of the options is Clear.
    Best regards,
    Duncan

Maybe you are looking for

  • More problems with iTunes 9.1.0.79

    Hi, since I have had my iPhone I have upgraded itunes a couple of times and never had any problems until now. I upgraded to 9.1.0.79 two days ago and am having all sorts of issues. Now when itunes starts it takes ages. When my iphone is connected I g

  • Apple TV Replacement Program For Australia

    Anyone aware of this program in Australia.

  • How to set(add) an e-mail encoding option in iPod Touch Mail?

    Hi. When I'm sending multi language e-mail in my iPod, it is shown in my desktop below. ?섏씠 ?섏쓽 iPod?먯꽌 蹂대깂 2009. 04. 06 ?ㅽ썑 6:16 "Kwansu Lee" <[email protected]> ?묒꽦: But I can read in Outlook2007, if I set encoding options as UTF-8. 하이 나의 iPod에서 보냄

  • Power down iMac for a few months....

    I'm going to be doing some traveling without my 24-inch iMac. It will be necessary for me to leave it unused for two or possibly three months. I do not want to prematurely drain the little 3.6-volt Pram battery because it appears that with these new

  • Cannot add people to Group Voice call Version 6.12...

    Hi, Currently with the latest version of skype now you cannot add people to the voice call if they have already been added to the conversation but were not able to answer the call at an earlier time. The only way for them to join the conversation is