TREX Configuration for BW or BI server.

Hello Experts,
I need to know the steps for configuring TREX for BI information (BI reports) published in KM content of the portal..
The solution should provide the indexing service for the report published..
Steps for Increased performance in searching for the requested BI report published..
Thanks and regards,
Suresh

No suitable reply found

Similar Messages

NIC configuration for File Share Witness server

Best practices for a DAG is segment the MAPI or production network and the replication network. On the mailbox servers that are members of a DAG, we have two NICs that are configured differently.
What about the server with the File Share Witness (in my case, we are using a file server, there is not an extra Hub Transport server available).
Should this server be configured for two networks as well?
I'm thinking that the heartbeat traffic would be on the replication network? Or not?
I've read numerous documentation on the subject (Technet, MSExchange, ExchangeServerPro, SimpleTalk, etc..) and have never noticed a section about configuring dual NICs on the FSW server. Which leads me to think... that it is actually the "regular"
NIC that is used.
Can anyone confirm that?
Thanks in advance!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Right, FSW server doesn't need multiple NICs... FSW server is to just give a vote when you have even number of DAG members to make majority. Exchange is going to just lock a small file on the FSW server on the Witness directory, that is all...

Webutil configuration for windows 7 application server

hi all,
we are working on oracle forms/reports and recently upgraded the application server to windows 7 and database is oracle 10g
config:
os : windows 7
developer suite 10g
in this we are using the jre instead of jinitiator and did the all needful changes in formsweb.cfg. and webutil.cfg
now we can able to run forms/reports. but the problem is webutil is not working.
we are facing at run the reports as we select excel format and click ok button
the following error is coming
**oracle.forms.webutil.ole olebean not found**
any body kindly help me how to resolve this

See my comments in this post:
java.lang.ClassNotFoundException: oracle.forms.webutil.ole.OleFunctions
and this one:
webutil.cfg for win-7 64 bit client

Trex configuration for Service desk

Hi All,
After installation of TREX server on solution manager server, when i run SAF
Search Engine Name :STANDARD
i am getting SAF overview in error mode. then i try to check server engine status-->in side check info:"Error: Communication or other system error"
so i use guide to fix problem , then click on TEST, it gives DUMP as below.
Runtime Errors         CREATE_OBJECT_CLASS_NOT_FOUND
Except.                CX_SY_CREATE_OBJECT_ERROR
Date and Time          30.12.2008 17:36:24
Short text
     CREATE OBJECT: The class "CL_CRM_SAF_SE_TREX_AB" was not found.
Please help.
Regards
Andrew

Hi ,
I applied   Note 1124452 . and reconfig. Trex in solman SAF tool settings.hope this will help you.
Andrew

Php update/configure for Server 4.0

I had working Apache2 + PHP 5.6 running perfectly locally for development.
Web Docs were located in /Sites folder in user directory.
After Installing Server 4.0 all my setup is messed up. I can configure website again but it not uses PHP I have upgraded to.
I feel lack of control/configuration for web apps with Server 4.0. How I can get it working back as perviously or uninstall Server 4.0?
Filip

I have found solution to fix Apache after uninstallation of Server 4.0
http://remonpel.nl/2014/08/restore-apache2-service-after-removal-of-server-app/# more-554
I found also more articles that maybe would help me running my websites with OS X Server.... but for now I have decided to not come back to try this.
http://remonpel.nl/

How to have Multiple Configurations for a Flex Application

Hi All,
I've seen this question asked in various forms multiple times, but never answered: How do you set up a FLEX configuration to have different configurations for development (local), test server, staging server, beta server, and production server? I cannot imagine that Adobe has not accounted for this, something that is very standard in most development teams. Zend Framework has a very elegant solution for this: in the configuration file you define all aspects that can be configured, as well as the various environments (development, staging, beta, live, etc.). Then, in the bootstrap file you specify which environment you want to work in, and you're all set.
How can something like this be achieved in FLEX?
Many thanks!
-Mike

Maybe my setup is unconventional, I doubt it, though:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Developer then publishes Flex app to staging server. -> need to configure FLEX to point to staging PHP code here.
4) Flex app then gets published to live server. -> need to configure FLEX to point to live PHP code here.
Now, using ANT, the scenario would look like this:
1) SVN repo stores FLEX and PHP codebases in separate projects.
2) Developer gets code from repo, and runs on local machine. -> need to configure FLEX to point to local PHP code here for Remote Objects.
3) Code is good and developer checks it back into SVN.
4) ANT extracts latest build from SVN and builds it, then publishes to staging server. -> need to configure FLEX to point to staging PHP code.
I am using PHPUnderControl as my build server for PHP.
I am also unclear as to how my goal could be achieved using ANT?
Thanks!
Mike

Want to delete all the mails in the mail box configured for BPM Portal

Hi All,
Do you have idea to perform this activity.
I want to delete all the mails in the Dev mail box configured for BPM Portal.
Server and mailbox details as given below :
Mail a/c = Y00123
Mail server = sap.mail.com
Thanks, Sanjay

http://java.sun.com/developer/onlineTraining/JavaMail/contents.html
http://www.jguru.com/faq/view.jsp?EID=17035
if you know the password of the account, i think you can also access the mail using mail client, like you use outlook to deal with your company mail daily.

Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.

You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com

How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

Dear Experts,
I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.
The registered domain name is e.g. contoso.com.
a. What should I use as domain name on AD? contoso.com or contoso.local
b. Is it recommended to have two different servers for AD and Exchange?
c. What should be my connector settings for mail flow?
d. how can I set 2 email servers in company for load balancing?

Hi,
a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
b, Recommended that installing AD
and Exchange Server on two separate
Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
c, Found some articles for your reference:
Configure Mail Flow and Client Access
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
Configuring Outbound Mail Flow in Exchange Server 2013
http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
d, Load Balancing
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

In our java web application trying establish the connection for sharePoint 2013
using Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
claims only.
In the Sharepoint 2013 server in the IIS manager settings for authentication it is enabled for both Windows claims and Forms authentication,
but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
you" in the browser Kindly help me on this.

Hi,
This issue is always caused that you had missed FBA configuration in web config of your web application.
You can configure the FBA authentication then check whether it works.
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
more reference:
http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Problem in setting up XCM Configuration for Local Server

Hi
I have installed Local J2ee engine on my computer and have deployed E Commerce B2B B2C sca packages.
I am trying to complete the XCM configuration for my Local Engine. For below 4 links, I have done the configuration, creation of JCO, Shop, etc is done and have tested the JCO, the test is successful. JCOs are pointing to ECC 6.0 which is development server and on development server the XCM configuration is working fine.
http://<host>:<port>/b2b/admin/xcm/init.do
http://<host>:<port>/b2c/admin/xcm/init.do
http://<host>:<port>/isauseradm/admin/xcm/init.do
http://<host>:<port>/shopadmin/admin/xcm/init.do
But below 2 links are not working and I am getting "Page can not be displayed" error.
http://<host>:<port>/isauseradm/init.do
http://<host>:<port>/shopadmin/init.do
I need to created 2 shops in http://<host>:<port>/shopadmin/init.do but since the page is not displaying I am not able to proceed and hence when I try to login to b2b b2c application
http://<host>:<port>/b2b/init.do and http://<host>:<port>/b2c/ init.do , I am getting an error
"The shoplist read from buffer is empty",
I think this error can be resolved by creating 2 shops in http://<host>:<port>/shopadmin/init.do, but
http://<host>:<port>/shopadmin/init.do itself in not displaying.
Please can you help.
Thanks
Edited by: Neha Bhatia on Jun 4, 2009 10:31 PM

Hi
I checked the mentioned Patch Levels, everything seems to be fine.
After I did few changes in JCOs and checked the XCM configuration throughly shopadmin URL (http://<host>:<port>/shopadmin/shopadmin/init.do) has started working.
Now I have maintained 2 shops and can see the B2B and B2C web portals fine.
But as soon as I select any material, it is giving error saying error in XCM configuration related to IPC.
could you pleaase help me out with this?
Also, as soon as I click on the B2B Login link, it dumps.
And useradmin URL http://<host>:<port>/isauseradm/useradmin/init.do is still giving "Page can not be displayed",
These problems are related to XCM configuration, but not sure where exactly and which configuration is missing. please can you suggest ? Any XCM configuration related document will also be helpful.
Regards,
Neha

PDF has not been configured for this web server linux 11.1.2

Hi,
We installed 11.1.2 Hyperion WorkforcePlanning on Linux 32 bit OS.
When the user opens the workspace and tries to see the "Profit and Loss" and selects
"File --> Open In --> PDF format" , it just flicks for a sec and gives following message :
" PDF has not been configured for this web server"
Can somebody suggest me what to do ?
Appreciate your response.
Edited by: user536857 on Mar 22, 2011 3:07 PM

Check your print server service on your foundation server, sometimes I have had that just stop for whatever reason.

Identity Server has not been configured for this new user/group suffix

Hi all
I am having a problem trying to configure the Directory Server (5.2) for Messaging Server.
My configuration is as follows:
SJES Q12005
Server 1 - Directory Server 5.2
Server 1 - Access Manager (formerly Identity Server)
Server 1 - Web Server 6.1
I have successfully installed the above and can login to Access Manager.
I next installed Calendar & Messengar Server on "Server 1". Upon running "comm_dssetup.pl" from /opt/SUNWcomds/sbin, I get the following error:
"Identity Server has not been configured for this new user/group suffix"
Copy and paste of what I entered:
bash-2.05# perl comm_dssetup.pl
Welcome to the Directory Server preparation tool for
Sun Java(tm) System communication services.
(Version 6.3 Revision 1.0)
This tool prepares your directory server for use by the
communications services which include Messaging, Calendar and their components.
The logfile is /var/tmp/dssetup_20050830165940.log.
Do you want to continue [y]:
Please enter the full path to the directory where the Sun ONE
Directory Server was installed.
Directory server root [var/opt/mps/serverroot] : /opt/mps/serverroot
Please select a directory server instance from the following list:
[1] slapd-sunldap
Which instance do you want [1]:
Please enter the directory manager DN [cn=Directory Manager]: cn=DirMan
Password:
Detected DS version 5.2
Will this directory server be used for users/groups [Yes]:
Please enter the Users/Groups base suffix [dc=samplecompany-dev,dc=co,dc=uk] : ou=infrastructure,o=sampletown,dc=samplecompany-dev,dc=co,dc=uk
There are 3 possible schema types:
1 - schema 1 for systems with iMS 5.x data
1.5 - schema 2 compatibility for systems with iMS 5.x data
that has been converted with commdirmig
2 - schema 2 native for systems using Identity Server
Please enter the Schema Type (1, 1.5, 2) [1]: 2
Identity Server has not been configured for this new user/group suffix
You can opt to continue, but you will not be able to use
features that depend on Identity Server
Are you sure you want this schema type? [n]:
I have entered my user group suffix exactly as specified during the Access Manager install (hence I am able to login as "amadmin").
Looking at the LDAP logs to try and figure out whats going wrong I see its not getting hits on all searches it is performing:
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - RESULT err=4 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=160 msgId=162 - ABANDON targetop=NOTFOUND msgid=161
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - SRCH base="ou=people,ou=infrastructure,o=northampton,dc=dataforce-de
v,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(objec
tClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscapeRe
source)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - RESULT err=0 tag=101 nentries=0 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - SRCH base="ou=clientdata,ou=infrastructure,o=northampton,dc=dataforc
e-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(o
bjectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netsca
peResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=163 msgId=165 - ABANDON targetop=NOTFOUND msgid=164
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - RESULT err=0 tag=101 nentries=41 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=166 msgId=168 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:29 +0100] conn=299 op=166 msgId=168 - RESULT err=0 tag=101 nentries=41 etime=1
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - SRCH base="ou=iplanetamauthservice,ou=services,ou=infrastructure,o=n
orthampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectC
lass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServ
er)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=168 msgId=170 - ABANDON targetop=NOTFOUND msgid=169
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - SRCH base="ou=iplanetamauthldapservice,ou=services,ou=infrastructure
,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(obj
ectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscape
Server)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=170 msgId=172 - ABANDON targetop=NOTFOUND msgid=171
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - SRCH base="ou=iplanetampolicyconfigservice,ou=services,ou=infrastruc
ture,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)
(objectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=nets
capeServer)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=172 msgId=174 - ABANDON targetop=NOTFOUND msgid=173
[30/Aug/2005:16:41:29 +0100] conn=299 op=173 msgId=175 - SRCH base="ou=iplanetamauthenticationdomainconfigservice,ou=services
,ou=infrastructure,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(
--More--(83%)
The list goes on.
Can anyone give me any pointers?
Thanks

Hi
Thanks for your reply!
I did mis-type, my mistake - sorry about that.
If I dont over-ride the default it works, I've pretty much got the whole setup working now but I'm not particularly over the moon about the way the ldap tree is setup, I'd like finer granuality as we are going to attempt to get syncronization working with AD.
I have an idea about how I'd like to set up our Mail/Calendar/LDAP infrastructure the 2nd time around (I'm just testing at the mo) - so I might have a question or two for you if you dont mind taking a look when you have a minute?
Thanks Jay

Is it advisable for Content Server & Trex to be on the same server?

Hi All,
Is it advisable for the SAP Content Server & Trex to be installed on the same server?
Any feedback would be appreciated.
Kr,
Neil

Dear Neil,
If you are actually implementeing this architecture at clients place, then it should be implemented even if client insist.
I was also in same situation. But I strongly apposed this requirement.
If you want to used this Architechture for trail purpose or demo where you dont have option of having the luxury of hardware.
Then you can try such thing.
With Warm Regards
Mangesh Pande

TREX Configuration for BW or BI server.

Similar Messages

Maybe you are looking for