TREX - Configuring Distributed Slave with Decentralized Data Storage

I am creating a distributed TREX environment with decentralized data storage with 3 hosts. The environment is running TREX 7.10 Rev 14 on Windows 2003 x64. These are the hosts:
Server 01p: 1st Master NameServer, Master Index Server, Master Queue Server
Server 02p: 2nd Master NameServer, Slave Index Server
Server 03p: Slave NameServer, Slave Index Server (GOAL; Not there yet)
The first and second hosts are properly set up, with the first host creating the index and replicating the snapshot to the slave index server for searching. The third host is added to the landscape. When I attempt to change the role of the third host to be a slave for the Master IS and run a check on the landscape, I receive the following errors:
check...
wsaphptd03p: file error on 'wsaphptd03p:e:\usr\sap\HPT\TRX00\_test_file_wsaphptd02p_: The system cannot find the file specified'
wsaphptd02p: file error on 'wsaphptd02p:e:\usr\sap\HPT\TRX00\_test_file_wsaphptd03p_: The system cannot find the file specified'
slaves: select 'Use Central Storage' for shared slaves on central storage or change base path to non shared location
The installs were all performed in the same with, with storage on the "E:" drive using a local install on the stand-alone installation as described in the TREX71InstallMultipleHosts and TREX71INstallSingleHosts guides provided.
Does anybody know what I should try to do to resolve this issue to add the third host to my TREX distributed landscape? There really weren't any documents that gave more information besides the install documents.
Thanks for any help.

A ticket was opened with SAP customer support. The response to that ticket is below:
Many thanks for the connection. We found out, that the error message is wrong. It can be ignored, if you press 'Shift' and button 'Deploy' (TREXAdmin tool -> Landscape Configuration). We will fix this error in the next Revision (Revision 25) for TREX 7.1.

Similar Messages

Validation business rule on a cumulative basis with periodic data storage

Hi BPC Experts,
Is it possible to set up a validation business rule on a cumulative basis when we have periodic data storage type?
Appreciate your assistance with this.
Thanks.
Mila

Hi Mila
Please could you tell me how you solved the issue?
We have it the other way round, a YTD storage, but would like to validate accounts on a periodic basis.
Thanks for sharing your findings.
Melanie

Error in Distributed transactions with tx data source

          Hi, I need to write into two DB2 databases using two container managed entity beans
          from a container managed session bean. I use a JDBC 3.0 compatible JDBC driver
          and I have configured tx data source. When I run the session bean it gives me
          following exception.
          java.rmi.RemoteException: EJB Exception: ; nested exception is: javax.ejb.EJBException:
          EJB Exception:; nested exception is: java.sql.SQLException: Connection has already
          been created in this tx context for pool named DB2ConnectionPool2. Illegal attempt
          to create connection from another pool: DB2ConnectionPool1
          thank you Lahiru


          For a connection pool with xa-drivers, create a tx datasource and select 'Honor
          Global Transactions'. For a connection pool with non-xa drivers, create a tx datasource,
          select 'Honor Global transactions', and select 'Enable Two-phase commit'.
          "Lahiru Karunatilake" <[email protected]> wrote:
          >
          >Hi, I need to write into two DB2 databases using two container managed
          >entity beans
          >from a container managed session bean. I use a JDBC 3.0 compatible JDBC
          >driver
          >and I have configured tx data source. When I run the session bean it
          >gives me
          >following exception.
          >
          >java.rmi.RemoteException: EJB Exception: ; nested exception is: javax.ejb.EJBException:
          >EJB Exception:; nested exception is: java.sql.SQLException: Connection
          >has already
          >been created in this tx context for pool named DB2ConnectionPool2. Illegal
          >attempt
          >to create connection from another pool: DB2ConnectionPool1
          >
          >thank you Lahiru
          >

Configuration Transactions (IMG) with Validity Dates

I have been asked to identify all of the IMG transactions that are subject to validity dates. We have recently had some configuration expire and cause processing problems.
Is there a report available to identify such IMG transactions?
Kevin

Kevin,
There are not many IMG transactions that would expire per se..
One that strikes my mind immediately is the Factory calendar which is typically set for a given number of years (5 years). the other thing is the Public holidays in the each year that varies each year/ for each organisation etc.
One another IMG that would expire is the Number range for all SAP objects (prod order, pur order, goods mov documents etc...). This will expire only when document numbers reach the end of the number range.
I am sure this will help. For more questions please feel free.
Thanks,
Ram

BPS - Distribute with Reference data sender 2 reciever functionality

Hi All,
I'm looking for some documentation on this planning function(Distribute with reference data / from sender to reciever).When I run this function I have problems finding the Reference data,although I have defined the refernce data correctly and am using the # for the characteristics.
Is it possible to override a characteristic while executing this function.? for example you are distributing values form region level to line of business level,can you change the allocation flag(another characterstc) while executing this.?
Any documents with some Examples and guidelines of setting up Reference data will be very useful.
Thanking everybody in advance.,
Sudz.

Hello Sudz,
I know this can be tricky. First, you should check if reference data is read at all (use BPS_STAT0 transaction).
If no, check the configuration of planning package and parameter group. The selection criteria for the reference data are based on the planning package merged with the criteria for reference data defined in the parameter group (if there are criteria for the same characteristic in both places, the parameter group wins).
If yes, you need to go into more detail. The source data (to be distributed) is matched with the reference data based on all characteristics that are NOT in the fields to be changed. So maybe you have not defined the right fields to be changed (use execute with trace to see the internal packaging/matching).
You can change several characteristics with the function. However, this will increase the number of target combinations. If you want to turn off a flag, just use a repost function and link them via a sequence.
Regards,
Marc
SAP NetWeaver RIG

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data in addition to backing up the hard drive?

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?

Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?
Yes, but if you move the "original" data on your iMac to the Time Capsule....then the "original" data is now on the Time Capsule disk.
When...not if...the Time Capsule disk has a problem, you have no backups for this data.
Perhaps a much safer plan might be to add an external hard drive attached directly to your iMac. Then, move the data to that drive from the iMac.
Now, Time Machine will back up both your iMac and the external hard drive so you have "originals" on one drive and backups on another. Would that plan work for you?

Append value with Data Storage Vis

Dear,
I would like to use the Data Storage VIs to collect my data but I can't achieve my target.
I'm acquiring 1000 samples at 1kHz (N samples on demand) and I make the mean value of the samples. At the end of this proces I have a scalar value and the initial time at wich I have acquired the data. With this two I build a waveform and then I use the Write Data Storage Vi (TDMS) with "append" write mode to save my data.
When I read the Data Storage all the value have lost the time information. They start from 1.00.00,000 01/01/1904 and are equal spaced in time.
How can I keep the time information?
Thanks

Sorry totaly misread what you were doing.
You need to create ensure that waverform that is saved has the correct values for X0 and dx when you save it. Use the build waveform function to acheive this.
edit:
the default value for X0 is timestamp 0 (1904), use get datetimestamp at the very start of the cycle to get the correct value.
James
Message Edited by James W on 04-21-2010 01:06 PM

Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
...errors with the following output:
An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG. The command works well if run a CAS server in the active DB site.

Hi,
Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
https://www.testexchangeconnectivity.com/
Thanks,
Simon Wu
TechNet Community Support

Hi,i need to upgrade my 13"late 2011macbook pro with an ssd drive.i have noticed there is a system hard drive for booting up and a data storage hard drive that my computer uses,are these the same hard drive i can see inside my laptop?

hi,i use logic pro 9 and cubase to record,produce and master audio recordings and have bought a mac as recommended.have upgraded to 8gig memory (which i was told was the maximum you could upgrade a macbook pro)and still my recordin is slightley behind plauback.i need to replace my hard drive with a solid state drive to solve the problem.i have seen on youtube how to replace the hard drive but have noticed on the disk partition information that there is a 500gig harddrive for the system(booting up ect)and a 500gig harddrive for data storage,are these the same unit?i need to be sure im upgrading what the system uses to an ssd as well as the data storage or the problem wont be solved.i have an external hard drive so i have been looking at a smaller,faster ssd. hope you can help!

DaisyMay wrote:
Firewire 400/USB 2.0/1.1
I would recommend not settling for less then USB 3 or hold out for Thunderbolt, if your machine is capable. Firewire 800 minimum.
MacBook Pro, Mac OS X (10.7), 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop6.0

Windows 7 64bit Raid 1 Data Storage setup with UEFI and 6TB drives

i just bought a GigaByte MB with UEFI bios, 1 SSD 128GB drive for the OS (boot up), and 2 6TB drives for use in a raid 1 setup for the data storage.
I have been able to install win 7 64bit using the UEFI dvd drive. I have been able to define the 6TB mirror via the bios (under the Intel Rapid Storage Technology option) . But when ever i go into windows, and check under Disk Management, i don't
see the raid 1, i see two drives listed for the data, each at 1492 GB. I should be seeing 1 drive at 5.4TB.
note: I have tried re-installing win7 64bit many times to see if i have missed something. When i run setup off uefi dvd drive, i see that drive 1 (of what should be part of the mirror) and drive 2 are listed there at the reported 1492 GB size each.
So it seems that win7 doesn't see that mirror that i created via the bios. So is this a bios setting problem somewhere? i presume on this screen i should see the correct mirror size already.
Also, do i need to install win7 via the uefi dvd if i don't want to boot off those large drives (i just want to boot off the ssd. But when i did try that using a legacy mode, i couldn't later try to create a single large drive for the mirror using
GPT formatting. it just wasn't an option. although the mirror was recognized as 1 drive, but broken into 2TB and 3TB.)
what could i possibly be doing wrong??
Thanks for any help

Thank You Roger. I did call Gigabyte. This is how i solved it with the gigabyte support team.
1. Don't try installing Win7 64bit sp1 and setup RAID at the same time. (even go ahead and unplug those raid drives if you have it plugged in). The OS should be installed first on the boot drive, but make sure the BIOS is already set
to RAID (not AHCI. If you already installed OS under AHCI, you need to reinstall OS. i find this crazy because what if you decide to install raid down the road.. to an existing machine.. you can't do that because of this). Make sure
to install OS with the UEFI dvd drive option (i had done this).
2. Once the OS is installed, install all drivers that come for the Motherboard... That should include intel Raid drivers. (note gigabyte support didn't tell me to do this, but i didn't want to take a chance to have to reinstall OS again or have more problems,
but it makes sense.)
3. Now i have the GA-H97-Gaming 3 mother board, it had Bios F3. I upgraded it to F5 as per support tech.
4. turn off machine, and replug in the two 6TB drives.
5. after reboot, i find out that i no longer see Intel RAPID Storage Technology. (this should have displayed when i set the SATA Mode Selection to RAID before i started all this business... it did under bios F3, but not under F5.. bug?? i think so,
so i plan on letting gigabyte know about this). This is a problem. In Intel RAPID Storage Technology is where you define the RAID in the first place. OK, well after several reboots.. i tried to use CTRL-I to get to intel's interface
rather than that of the gigabyte bios. Voila... i define the Mirror...
6. I am able to boot into OS. I got to Drive Management. I now see 1 6TB drive. I initialize it of course using GPT. Format it. All all looks good now.
Hope this helps someone.. took me enough tries to get it right. I really am bothered about requiring the OS installed in the correct SATA mode just to get RAID working. As i mentioned, you can't change your mind afterwards without reinstalling
OS. Also i couldn't even get the OS setup to start when i had those raid drives plugged in.. so make sure to unplug them.
Best Regards.

Use an external HD with Airport Extreme to access it for data storage from computers connected to the WiFi network?

Can I connect My Passport HD into my Airport Extreme's USB port to access it from my computers (27" iMac 2012 now using Yosemite) on that Wifi network for data storage and retrieval purposes?

Yes, if the AirPort base station's hardware supports 802.11n. The drive needs to be formatted as Mac OS Extended (Journaled), FAT16, or FAT32, and may need to be connected through an USB hub with its own power supply.
(117777)

Boot data configuration missing or with errors

I have a Satelllite L870-15W, and no way to turn the system on.
All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
file: efi/micorsoft/boot/bcd,
status 0x0000001;
the boot configuration data for your or is missing or contains errors.
I have only recovery partition at D: but cannot access it. What shall I do?

Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
Spec here too.
boot data configuration missing or with errors
It probably means the BCD is missing or corrupt.
To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
WinRE looks like this. Select Troubleshoot and then Advanced options.
Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
   Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
   c:
   cd boot
   attrib bcd -s -h -r
   ren c:\boot\bcd bcd.old
   bootrec /RebuildBcd
-Jerry

Using a partitionned cache with off-heap storage for backup data

Hi,
Is it possible to define a partitionned cache (with data into the heap) with off-heap storage for backup data ?
I think it could be worthwhile to do so, as backup data are associated with a different access pattern.
If so, what are the impacts of such off-heap storage for backup data ?
Particularly, what are the impacts on performance ?
Thanks.
Regards,
Dominique

Hi,
It seems what using scheme for backup-store is broken in latest version of Coherence, I've got an exception using your setup.
2010-07-24 12:21:16.562/7.969 Oracle Coherence GE 3.6.0.0 <Error> (thread=DistributedCache, member=1): java.lang.NullPointerException
     at com.tangosol.net.DefaultConfigurableCacheFactory.findSchemeMapping(DefaultConfigurableCacheFactory.java:466)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage$BackingManager.isPartitioned(PartitionedCache.java:10)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.instantiateBackupMap(PartitionedCache.java:24)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.setCacheName(PartitionedCache.java:29)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ServiceConfig$ConfigListener.entryInserted(PartitionedCache.java:17)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
     at com.tangosol.util.ObservableHashMap.dispatchEvent(ObservableHashMap.java:229)
     at com.tangosol.util.ObservableHashMap$Entry.onAdd(ObservableHashMap.java:270)
     at com.tangosol.util.SafeHashMap.put(SafeHashMap.java:244)
     at com.tangosol.coherence.component.util.ServiceConfig$Map.put(ServiceConfig.java:43)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$StorageIdRequest.onReceived(PartitionedCache.java:45)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.java:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.java:33)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onNotify(PartitionedService.java:3)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onNotify(PartitionedCache.java:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.java:42)
     at java.lang.Thread.run(Thread.java:619)Tracing in debuger has shown what problem is in PartitionedCache$Storage#setCacheName(String) method, it calls instantiateBackingMap(String) before setting __m_CacheName field.
It is broken in 3.6.0b17229
PS using asynchronous wrapper around disk based backup storage should reduce performance impact

How to configure a test sever with the system copy with prd data

Dear All ,
I need to configure a test sever with the system copy with prd data.
Please any one can suggest the step by step process to do the same configure and system copy.
Regards
kumar

Dear All,
I am facing problem in system copy. I want to knoe the way after restore i can move all the data and server data in one drive .
Now the error is resolve by changing the initTAT.sap the value tape to disk but now stuck in the drive for restore it is asking which is not there at os level.
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD33' at location
BrDirCreate-1
BR0253E errno 2: No such file or directory
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD32' at location
TO solve the above problem i have created ad network drive for this but once all the restore will be completed than how i can i move the data form network drive to on drvie.
Please suggest
Regards,
Kumar
Edited by: kumarmoh on Jul 21, 2009 1:43 PM

How to alternate data storage into 2 arrays with an analog square wave input? (seems that the retriggerable function is not supported by my PXI card)

Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi ‏47 KB

Hello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel

TREX - Configuring Distributed Slave with Decentralized Data Storage

Similar Messages

Maybe you are looking for