TREX Error 2029
Hi,
I am implmenting E-Rec 6.0 and I am having problems setting up TREX 7.0 and searching the index. In transaction SKPR07 I have selected document class HR_DOC and document area HR_KW then click on TEST SEARCH. Using a search criteria of * I either get an error message 2982 (which I know what it is) or 2029, but I cannot find out what this error message means. Can anyone provide any help on this?
Thanks
Hi Mikail,
I got this error when trying to run the test search in SKPR07 with *
Any advice?
Thanks
Tom
Similar Messages
-
TREX Error while implementing a Rule Modeler in ERMS
Hi Experts,
I am getting the below error when i am implementing a Rule in ERMS. Please suggest how to rectify the error.
Exception in method execute(CL_CRM_ERMS_SERVICE_MANAGER) : Service CL_CRM_ERMS_ADD2FB_CA failed. TREX error:Error in the RFC communication: Error when opening an RFC connection (IMSDEFAULT)[error code =] at: CL_CRM_ERMS_ADD2FB_CA=========CP : CL_CRM_ERMS_
Processing policy ZTEST_RULE1
Exception in method execute(CL_CRM_ERMS_SERVICE_MANAGER) : Service CL_CRM_ERMS_RULE_EXEC failed. Policy not found in repository:ERMS:ZTEST_RULE1 at: CL_CRM_ERMS_RULE_REPOSITORY===CP : CL_CRM_ERMS_RULE_REPOSITORY===CM005 : 44
BOR: returned from Service Manager.
Regards,
NilouferHi Niloufer123
Have you regenerated your Repository after making changes?
If not, go to SA38 and run program CRM_ERMS_REGEN_RULES for ERMS context for your Policy (check box checkboxes).
Now re-run your scenario. Hopefully this has helped.
Thanks,
Andrew G. -
Trex error: No embedded object found in document (Errorcode 14037)
Hi,
we have following problem with our crawler:
in the crawler 50 % of documents are returning the error "No embedded object found in document (Errorcode 14037)" and are not displayed in the trex monitor. All other documents are indexed correctly an are in the trex monitor in "OK".
We are on Stack 14 Patch 4.
Regards,
GerhardHi Gerhard,
Typically, errors codes 14XXX are related to filter problems during the preprocessing of documents. Details about TREX error codes are explained in the help portal and in the note 898404.
Unfortunatelly, filter problems could not be easily fixed. However, a good starting point would be to use a newer TREX release. If this doesnt help please open a Customer Message and attach documents, which causes the mentioned error. Please attach only not sensible documents!
Kind regards,
Roland -
There are too many TREX Errors
Hello Experts,
I have created an Index for a specific folder in KM.
Under KM--> Sys Conf --> KM --> Index Administration it shows the green led, which I believe that the data sources are completely indexed. But, under the KM--> Monitoring > KM> Indexing Monitor , it says:
Status = red led (There are too many TREX errors)
Status = Active
In Process = 142678
Indexed = 51345
Errors = 10849
And, when I opened the list of errors there are many Crawler and Trex: Preparation failed: index operation
Can you suggest, what's the mistake that I am doing or do I have to any additional configurations for the index that I have created??
Thanks,
RaghavaHi Raghava,
as I said, "Preparation Failed" may be (if I recall correctly) as early as the HTTP request to even get the document for indexing. If this is not possible for TREX, then of course the indexing fails.
What I suggested was a manual reproduction. So log on to the TREX host (preferrably with the user that TREX uses to access the documents) and then simply try to open one of the docs with the "failed" status by pasting its address in the browser. If this does not work, you have a pretty good idea what's happening.
Unfortunately, if that were the case, this would the be some issue in network communications or ticketing and authorizatuions, which I can not tell you from here how to solve.
In any case, I would advise to open a support message to SAP - probably rather under the portal component than under TREX, as I do not assume that this stage of a queue error has anything to do with the actual engine.
Best,
Karsten -
There are too mant TREX Errors
Hello Experts,
I have created an Index for a specific folder in KM.
Under KM--> Sys Conf --> KM --> Index Administration it shows the green led, which I believe that the data sources are completely indexed. But, under the KM--> Monitoring > KM> Indexing Monitor , it says:
Status = red led (There are too many TREX errors)
Status = Active
In Process = 142678
Indexed = 51345
Errors = 10849
And, when I opened the list of errors there are many Crawler and Trex: Preparation failed: index operation
Can you suggest, what's the mistake that I am doing or do I have to any additional configurations for the index that I have created??
Thanks,
RaghavaHello Raghava,
It's impossible to say from the provided information what is causing some of your documents to fail, you need to check in the TREX monitor for errorcodes etc.
Have a look at the below wiki link as a starting point:
http://wiki.sdn.sap.com/wiki/display/KMC/TroubleshootingKMIndexingandCrawler+issues
Regards,
Lorcan. -
Hi, does anybody know what TREX error 9009 menas exactly. I could not find a meaningful description of it.
Kind Regards,
ChristopherHmm... the problem still persists, albeit I have freed enough disk space. Thus does anybody know something about this. Where can I get the information? I found nothing on Service Marketplace explaining this error and giving me a hint.
Regards,
Christopher -
Error: Error #2029: This URLStream object does not have a stream opened
Hi there,
I am working on sound.
Error: Error #2029: This URLStream object does not have a stream opened.
Error occured during the sound.close()
Anyone Knows kindly reply,
Thanks in advance,
SaransoftIf you think that this error is 'normal' use this
try
sound.close()
catch( exc )
//Do nothing -
I am using EP 7.0 SP15. I have created an index to Search the WPC Content. The properties for the index are as follows:
ID: wpcIndex_DEV
Name: wpcIndex
Group: none set
Crawler Parameters: standard
Active: checked
Service:Trex Search
Service Type: Search
Items to Index: All
fuzziness: 0.7
Data Sources: root>Web Content
When I look at the Index Monitoring I see:
Status: red (There are too many TREX Errors)
Index: wpcIndex_DEV
Status: Idle
InProcess:0
Indexed: 492
Errors: 109
All 109 Errors state the same Error Type: "Trex: Preparation failed: index operation"
I have found alot of documentation on how to set up TREX Indexes or how to check them but nothing on how to fix the errors. Can someone please point me in the right direction for getting this index to process correctly?Hi TA
What version of WPC are you running?
In the older versions of WPC the internal links are hardcoded (thus not using the correct URL from the URL generator service). Try to republish the WPC pages and see if that doesn't solve the problem.
You also did not set up the index according to the documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/e58d6e146d5591e10000000a1553f7/frameset.htm
Remember both the crawler, and the custom property.
Best regards,
Martin Søgaard -
TREX Error when serching in EP 7-
HI
i am geting following error when serching docs in portal using TREX..
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Indexing document failed. Communication error. HTTP server error: 503 (Errorcode 7266)
Regards
BuddhikeHi Buddhike,
make sure, that the Portal and TREX can communicate with each other, if they are installed on different servers.
If a Firewall is between them, check that the Firewall does not block any required ports.
Best regards,
Denis -
Hi All,
when iam trying to index the documents from DMS repository getting errors.
6500 HTTP status internal server error.
preprocessor log :
Preprocessor.cpp(00963) :HTTPGET failed for URL http://<XXXXXXXX>:<XXXX>/irj/go/km/docs/dmsrm/EDIPUBLICROOTFOLDER%23FOL%23000%2300/0000000000000010000000057%23FOL%23000%2300/0000000000000010000000059%23FOL%23000%2300/0000000000000010000000060%23FOL%23000%2300/0000000000000010000008673%23FOL%23000%2300/0000000000000010000008685%23FOL%23000%2300/0000000000000010000006522%23DOC%23000%2300/0000000000000010000008183%23DOC%23000%2300/0000000000000010000006526%23DOC%23000%23004B77640652ACE087E10000000AFA029A.pdf with Httpstatus 500
Preprocessor.cpp(03570) :HANDLE: DISPATCH - Processing Document with key ' /dmsrm/EDIPUBLICROOTFOLDER#FOL#000#00/0000000000000010000000057#FOL#000#00/0000000000000010000000059#FOL#000#00/0000000000000010000000060#FOL#000#00/0000000000000010000008673#FOL#000#00/0000000000000010000008685#FOL#000#00/0000000000000010000006522#DOC#000#00/0000000000000010000008183#DOC#000#00/0000000000000010000006526#DOC#000#004B77640652ACE087E10000000AFA029A.pdf' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)
8005 Time out reached.
Preprocessor.cpp(03570) :HANDLE: DISPATCH - Processing Document with key '/dmsrm/EDIPUBLICROOTFOLDER#FOL#000#00/0000000000000010000000057#FOL#000#00/0000000000000010000000059#FOL#000#00/0000000000000010000000060#FOL#000#00/0000000000000010000008673#FOL#000#00/0000000000000010000008685#FOL#000#00/0000000000000010000006522#DOC#000#00/0000000000000010000008182#DOC#000#00/0000000000000010000007290#DOC#000#004B8A04D0393DDFEDE10000000AFA0297.pdf' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8005)
Could you please help me to resolve the issue.
Waiting for your response.........Hi RMedak,
>For error 6500
If the trace files are giving a 6500 error which usually occurs if TREX
is indexing while the J2EE is not available. For example, TREX could
have been started before the J2ee had started up. Could you please
restart the J2ee engine. Once this has been done restart the TREX
services & try to reindex.
>>Error code 8005 means time out reached & preparation failed.
The errorcode 8005 seems to relate to links pointed to the objects
outside of the local network. You have to configure the proxy host
in the TREXPreprocessor.ini if you need to index these.
Please don't forget to add the local domain in the section
proxy rules in the same TREXPreprocessor.ini like
e.g.
[proxyrules]
sap-ag.de
sap.corp
For more information on configuring proxy please check the SAP Note
571798 you need to fill out the parameters
proxyhost=
proxyport=
Regards,
Shiva -
TREX Error : Exception condition "UNKNOWN FUNCTION" raised.
Hi All,
When i try to search for a product in the SAP CCM catalog, i am getting a dump "Exception condition "UNKNOWN FUNCTION" raised. ".
If anyone has faced similar error before, please help me resolve it.
Thanks
NishKelHi
Which TREX / CCM Version are you using ?
What is the detailed Dump message ? Please paste the details using ST22 Transaction.
<b>Other related SAP OSS Notes to check out -></b>
Note 969660 6.20/6.40 Patch Collection Installation : Unix
Note 1019227 DBM Package archivation
Note 1017750 DBM Order Archiving
Note 846657 TREX 6.1 XML attribute extractor doesn't work
Note 1006014 Lock of SINGLE_TABLE_INDEX
Note 932771 BIA: Change run, locks and initial indexing
Note 712341 ISA-R/3: No configuration possible when TREX is used
Note 733873 Publication of individual catalog items
Note 572940 Reduction of the number of index tables for area attributes
Do let me know.
Regards
- Atul -
Hi all!
Searching with TREX return an error (found in TREXADMIN trace log):
[4620] 2007-10-31 20:48:59.531 e TREXRfcDll rfddll.cpp(00867) : table size mismatch for SRET_INDEX_STORAGE_SEARCHING:DOCATTRTAB, rfc=29,exe=27
any suggestions?
Thanks in advance,
Yury.Hi Yuriy,
Can you please advise how you fixed this please as I have the same error message.
Thanks
Hamish -
Hi,
My TREX, after trying to Reindex gives me this error in Log Aplication:
AbstractTrexIndex: The index server (for the specified indexes) cannot be determined (Errorcode 2960).
and this in Administration Index:
Operation failed creating index failed: The index server (for the specified indexes) cannot be determined (Errorcode 2960)
both Index Server and Queue Server are Not Available.
What can I do to make then available?
Trex Version: 6.1.09.00
Best Regards
LaiHi Lai,
in case of clear errors: please log a support message.
Thanks, Karsten -
Hi All,
I am installed the TREX7.1 sucesufully, after that i ran the script
python Runinstallertest.py and it ran succesfully with returncode 000 and allservers are showing ok.
I have configured a RFc connection to test system and rfc is working fine(doen connection tests from ends got passed).
I am executed the tcode trexadmin and selected the rfc now it is not showing any services in the services tab and showing the errore code 4950
as below.
FYI:
Please share your valuable suggestions to overcome this issue.
Thanks in advance.
Points will award for all helpful answers.
Regards,
Praveen Kumar.Hello,
Firstly check your version of ABAP and TREX.
The TREX should have at least the same patch level as the application.
Check note 1391758 for more detailed information.
Regards,
David -
TREX error 5500: NameServer error: communication with server failed
Hello TREX Gurus,
After applying the latest NW 7.0 SPS18, TREX is no longer working. We are getting this error message in the TREX Administration.
"5500: NameServer error: communication with server failed;connection refused,location=sap01:37001"
Any helps is greatly appreciated,
Davewe have same problem... did you find a solution?
best regards
Maybe you are looking for
-
A random variety of my songs are grayed out so they won't play and it shows the ICloud download symbol next to them. In the top left hand corner, it shows the cloud symbol with horizontal lines moving, as if it's in the process of downloading, but i
-
Live! Cam Socialize HD 1080 - recognised but no picture
Just got the new webcam and installed as per instructions. I have installed the latest drivers as well. I'm running win 7 32bit. Camera worked ever so briefly and now I get no picture. I have uninstalled drivers, reinstalled them, rebooted between in
-
Strange disc utility behaviour with windows partition
Hi, I have created a 30 gig partition for windows XP (FAT32) on my macbook, which all works fine, but back on the mac volume, I tried to make an additional 10 gig partition for which I planned to save all my audio work in Logic to. It appeared to cre
-
Colors in Windows 7 vs. Photoshop CS4
Right off the bat - I'm a color newb (color profiles, management, etc). I've tried to set things up correctly, but I have a couple questions. I have an HP ZR24w monitor hooked up to an HP 6730b laptop. On the external monitor, when I view photos i
-
Cost Center/Profit Center - MBS
Hi Gurus, Where i assign a cost center and profit center in documents when posting mbs in ff67 ? Tks MP