TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
<b>error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.</b>
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

Similar Messages

Index category could not be created; Error code 2982

Hi all
I get this error when we try to do the Product Catalog Replication with CRM 5.0 SP 8.
We check the RFC Conection, Search Server Configuration, TREX 7.0 status and is Running Ok, IIS user access and Virtual Directory config.
Any help on what else to check o the error reason?
Thanks in Advance.

Hi Luis,
I had the same pbs, and did the users add full rigths on the folder you replicated your catalog. This user must be the same user as in your CRM system, ( the targets publishing user => spro=>Customer RElation Ship Management => Product Catalog => Set Target for publishing Catalog Content..)
Hope it's help

Error : Item Category could not created.

Hello SAP Masters,
While creating a "sales process" in SAP CRM I've got the following error
"Item Category could not created"
Now let me tel you what exactly I've done, I have defined a "Sales Process" Type transaction called "Ysal" and by copying the slandered Item Category "Tan" I've created "ZTAN" , and for the Item category group and the Item Category Usage I've created "ZItem Group" and "ZItem usage".
Now in the Item Category determination I've filled up
Transaction Type = Ysal
Item Cat. Group = ZItem Group
Item Cat Usage = Zitem Usage
Main Item Cat. = Ztan
and under Item Category determination
Item Category = ZTAN
after this I've created A product Master and a ,material where I've assigned Item Category Group, and the product master.
Now Please explain why I've got this error, as I've maintained the determination properly so in my view during transaction creation Item Category should be determined automatically.
One more thing I am confused about "Higher Level Item Category" and "Lower Level Item Category" please explain.
Thanks and Regards
Rahul

Hi,
Thanks for your reply, as per your guidance left the "Item Category" field blank, and also the "Main Item Category" as blank and selected my "ZTAN" in Item category.
After that It worked, and the Item Category perfectly determined.
But there is error for "ATP" not checked. Can you please explain. Also please explain what is "Main Item Category".
As you have said the higher level category is for main product, and lower level category is for dependent product like free product, then if there is scenario where no free product , in that case what should be done?
Thanks and Regards
Rahul
Edited by: Rahul07 on Jan 21, 2011 7:22 PM

Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

What version of FCPX ?

BootCamp Assistant Error : Your bootable USB drive could not be created. "An error occurred while formatting the disk."

I have a Windows 7 Ultimate .iso file saved onto a "Mac OS Extended (Journal)" formatted USB flash drive. I am trying to install it with BootCamp Assistant and I keep getting the error message : Your bootable USB drive could not be created. "An error occurred while formatting the disk."
I have previously installed Windows 7 on my Mac (and it worked flawlessly - same .iso file), but I uninstalled it because I didn't partition enough space on my hard drive. I have used several flash drive to try and install and none have worked.
Some help would be greatly appreciated.

The Boot Camp forum is located here: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/

Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

HT1212 hi I have the following error message : iTunes could not collect to the iPodan error orccurered (0xE8000084) I

hi I have the following error message : iTunes could not collect to the iPodan error orccurered (0xE8000084) I

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

Trying to resolve 'error 45' sparsebundle could not be created while trying to use Time Machine to back-up to an external wireless harddrive

Hi,
I have been trying to resolve a repeated 'error 45' (Macbook Pro. sparsebundle could not be created) while trying to set up back-ups to run via Time Machine with an external wireless hard drive (Goflex Home by Seagate). I either get that message or a 'sparsebundle is already in use message. Anyone else come across this?

neillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

Why do I get this error "Home Sharing could not be activated because an error occurred (5506)?

I have a external HD and ant to use iTunes without importing music into the computer

I have a brand new iMac with all the newest updates etc etc, Safari logs me in without any problem but iTunes etc is just not working.. and I have the same message...Any ideas how to resolve this?
"Home Sharing could not be activated because an error occurred (5506)."

Error "Your Disk Could Not Be Partitioned. An Error Occurred While Trying To Partition Your Disk."

Ok, so I recently bought a Windows 8 System Builder DVD from Amazon to install Windows 8 via Bootcamp on my Late 2011 13" Macbook Pro. I had previously downloaded the drivers onto an 8 GB FAT formatted flash drive. When I went to partition my disk, I received an error message something similar to the one in the title. This is really important. Can anyone help?

The exact and complete error message would help. But you likely have an external drive connected or you have multiple internal drives. Disconnect all usb external devices then try again.
or, since you did not provide the exact error message, maybe you do not have enough contiguous free disk space to create the partition.

The operation could not be completed because an error occurred when creating frame 30256 (error -1).

When trying to export a project from FCPX, I get this error
The operation could not be completed because an error occurred when creating frame 30256 (error -1).
Has anyone any ideas?
Many Thanks

Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

Sparsebundle" could not be created (error 17)

I am trying to set up a second compuer on time capsule and get the fopllowing error message: sparsebundle” could not be created (error 17). What am I doing wrong?

To get started on this, see #C9 in Pondini's excellent support document, Time Machine -- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html

Port could not be created

Hi gurus,
While creating ALE partner profiles from R/3 , I am getting the following error.
Port could not be created
RFC destination SRMCLNT100 not specified for system SRMCLNT100
Enter the RFC destination and restart the generation
I have created the RFC destination from R/3 as wellas from SRMclinet 100 and could be able to remote logon to the respective systems. I am able to create partner profiles from SRMclient 100 but I could not do it from R/3.
Pl give your advice.
SS

Hello,
We defining ALE Distribution models, we add message types between 2 logical systems.
When generating the partner profile from this view, the system tries to use an RFC destination with exactly the same name as the logical system.
In your case, it does not find the RFC destination SRMCLNT100 in R/3.
A workaround is to maintain the partner profiles manually :
WE20 to maintain partner profile
WE21 to maintain ports
Rgds
Christophe

HT3275 Macintosh.sparsebundle could not be created

Time machine error = "Macintosh.sparsebundle could not be created" error 17. What does it mean and what do I do with it?

Normally you just need to reboot everything.. restart the network from off in correct order.. modem.. TC.. clients. It is just stupid network bugs in Mountain Lion.
More trouble go to Pondini.
Try C10.. some of the others could help.. and "More Like This" column on the right.
http://pondini.org/TM/Troubleshooting.html

TREX error Index category could not be created: Exception 8,Error

Similar Messages

Maybe you are looking for