TREX for NetWeaver 7.0  Java (2004s) SP9 not found - Not in FTP site.

The Sneak Preview for Java 7.0 shows a TREX file for download.  However the file is not there.  Is this a known issue?  We are looking forward to using the trial, but without searching and classification, we cannot research the best way to implement our DMS.
Thanks in advance for any information on trial TREX availability.
Message was edited by:
        Craig Burnett

I just checked this morning and the link now points to the SAPNetWeaver04_SP16Preview_TREX6116P2 rar file.  I had downloaded that file back on 6/7/07 but it would not work.  It would quit at the question asking for an instance to apply the hot fix, so I am guessing that it is only a maintenance release.
I have not re-downloaded it since they fixed the link.
However, I eventually found a download of TREX 6.1 on the SAP Software Distribution Center site found here:
<a href="https://websmp205.sap-ag.de/swdc">SAP Software Distribution Center site</a>
Search for 51030611.  I was able to load that successfully.
Good luck.
Message was edited by:
        Craig Burnett

Similar Messages

  • Installing TREX for Netweaver Sneak Preview2004s SP9

    Hello,
    I installed Netweaver Sneak Preview 2004S SP9. In the description of the download package TREX is mentioned. But it did not install. I found Thread TREX in EP? where a file SAPNW2004sJavaSP9_TREX.rar is mentioned. Does anybody know how to the download this file, rsp. how to install TREX for Netweaver Sneak Preview 2004S SP9?
    Thanks in advance.
    Best regards
    Bernd

    I just checked this morning and the link now points to the SAPNetWeaver04_SP16Preview_TREX6116P2 rar file.  I had downloaded that file back on 6/7/07 but it would not work.  It would quit at the question asking for an instance to apply the hot fix, so I am guessing that it is only a maintenance release.
    I have not re-downloaded it since they fixed the link.
    However, I eventually found a download of TREX 6.1 on the SAP Software Distribution Center site found here:
    <a href="https://websmp205.sap-ag.de/swdc">SAP Software Distribution Center site</a>
    Search for 51030611.  I was able to load that successfully.
    Good luck.
    Message was edited by:
            Craig Burnett

  • HT1349 Not a Mac computer-have had ITunes on this computer for literally years.  This morning i am getting an error message trying to open Itunes - MSVCR80.dll not found, Not installed correctly Error 7 (Windows error 126).  DL would not work.  Help!

    Have had Itunes on this computer literally for years.  This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
    Help!

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • What is the best IDE for database programming in java?

    im just new to java, i have experience in powerbuilder and visual basic. Im looking for an IDE for JAVA Database Programming that have same ease of use of the GUI builder of visual basic and power of the Datawindow in Powerbuilder.
    What is the best IDE for database programming in java?

    hey sabre why not just help me? instead of posting
    annoying replies. You want me to browse all the post
    two weeks ago to find what im looking for. stoopsMost regulars to this forum find X-posting annoying. Since you are lazy and want me to search the posts of the last couple of week for you, I find you very annoying.

  • SAP NetWeaver 7.0 Java Trial Version

    Hi all,
         less then one month ago I bought the book "Developers's Guide to SAP NetWeaver Portal Applications" on sap-press.com. According to the chapter 2, to enable the reader to reproduce the examples, it's suggested to install a local portal enviroment. The authors suggest to download from sdn and install the SAP NetWeaver 7.0 Java Trial Version which seems not to be available. Can you tell me which could be the new realese to download with the same features? Or where can I find the requested release ?
    Thanks in advance,
         Gianluca

    Hi Gianluca,
    please check the below links
    /people/gregor.wolf3/blog/2008/03/31/sap-netweaver-70--java-and-abap-trial-version-on-linux--vmware-edition--tips-tricks
    https://www.sdn.sap.com/irj/scn/nw-downloads
    Re: SAP NetWeaver 7.0 - Trial Version on Windows
    Regards,
    Srinu

  • Look for general blog on Java technologies

    Hello,
    I am greatly interesting in Java and look for active blog on Java technologies. I found 1000 of blogs posted in this forum but many are very specific or not active anymore. Could you please advise me good java blog with regular posting and interesting articles on different part of Java?
    thanks
    sebastien

    To write JNI code for integrating of an activeX is not a simple task. You will face with a number of problems related to COM:
    - when and where to call CoInitialize and CoUninitialize,
    - how to clean up COM references on Java Application exit,
    - when to do Thread Marshal and when it is not needed for COM interfaces;
    - how to Marshal and Unmarshal COM parameters in Java methods calls to COM Interface methods, etc.
    The best decision is to use some Java-COM Bridge.
    My company has developed tools like
    - Java-COM Bridge
    - Object-Oriented JNI SDKs for C++ and .NET (v1.1,v.2.0) languages (do not mix with JNI wrapper generators). These are an object-oriented maps of the regular JNI SDK,
    - Add-Ins for MS Visual Studio v.6.0 and v.7.1 that generate Java wrappers in C++, C#, J#, MCpp, VB for Object-Oriented JNI SDK.
    So we know problems you have.
    See our site
    http://www.javain.com

  • SAP Bibliothek for NetWeaver 04

    Hi all,
    do you have any idea if the pdf docs stored in this link:
    http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
    Have also similar docs been released for Netweaver 04 version?
    Latest version I found is R/3 4.6
    Thanks in advance,
    Loukas

    Hi,
    PDF docu is not provided any longer that way.
    Beginning from 6.20 you should install the CHM Windows docu DVD (Mat-Nos can be found in http://help.sap.com/ > NetWeaver). This so called HTMLHELPFile type of help appears in an extra viewer, which offers 'Printing of a section including all sub sections'. So if you have a PDF printer installed on your PC, you can print all sections you are interested in.
    Best regards
    Christoph Nake
    PM
    SAP

  • Masthead.par - Netweaver 2004s SP9 Java Trial - overwritten

    Hello everybody!
    Unfortunately i have overwritten my com.sap.portal.navigation.masthead.par. My Installation is the  SAP Netweaver 2004s SP9 Java Trial
    Could anyone send me the original file or tell me where to download ist?
    Thanks!
    Best regards,
    Sven

    Hi Uday,
    thank you. Please send it to [email protected]
    Regards,
    Sven

  • Java 1.4.2_17 x64 for Netweaver 2004s SR3

    Hi All,
    we are implementing Enterprise Portal 7.0 SR3 on a x64 bit Windows platform.  I am trying to obtain the java runtime environment for x64 bit and SAP notes directs me to this site http://java.sun.com/j2se/1.4.2/SAPsite/download.html where I should be able to download the x64 bit j2se 1.4.2_17. 
    This site is dedicated for SAP customers and requires you to register, for which I have, and the registeration process is excruciatingly slow.  Besides, we are having authentication issues for the site and each issue takes 72 hours response time from SUN.  Long story short, we need the J2SE 1.4.2_17 x64 bit for Windows urgently to finish our install.  Does anyone have this executable and is willing to share it?

    Dear
    Yes
    You can find the information in SAP note 716604
    Note 716604 - Access to Sun J2SE and recommended J2SE options
    "part of the note:"
    Important note:
    With 1.4.2_18 we are currently having massive stack overflow problems on Windows x86 (64bit) with our default parameter set. The issue is still under investigation. Additionally we have a performance regression with Java Systemcopy on 1.4.2_18.
    Until further notice please don't use 1.4.2_18.
    In the meantime SUN has made available 1.4.2_17 for Windows x86 (64bit) and Solaris x86 (64Bit) for download. Please see note 941595.
    Kind regards
    Tom

  • SAP NetWeaver 7.01 Java installation on MSCS and Log shipping for DR

    Hi Experts,
    Can anyone please explain if below is possible :
    - We have installed Netweaver 7.01 Java application server on Microsoft clustering which is working perfectly ok.
    -Now we are looking at building a DR solution for the above installation using SQL Server 2008 Log-shipping. The DR site has the same MSCS configuration as the primary site.
    -If we log-ship the production database and create a secondary database in "standby" or "norecovery" mode, how do we install a Passive SAP Central instance in case we want to failover from the primary to secondar ?
    - We know that we have the primary database log-shipped to the secondary site and in the event of failure we can switch the roles and make secondary as primary and then perform the system copy steps on the MSCS. the drawback here is that it will take a long time to bring the system online if we perform the system copy. Our RTO is one hour only so this is not acceptable.
    Question : Is there anyway we can install the Central Services and Applicaiton servers beforehand on the secondary site on the secondary log-shipped database so that in the event of failure all we do is bring the secondary database primary and then start the SAP on the secondary site ?
    If yes then can anyone point me the any SAP note or documentation that has the details of how to do this.
    I have already looked at 1101017, 965908 but its not clear how we can perform the installation on the JAVA stack only.
    We want to implement similar to what is shows in the below diagram :
    http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm
    Appreciate if someone can assist in resolving the above query.
    Thank you.
    RA

    Thanks Markus for your reply.
    I did looked at the HA web page from SAP and configured MSCS for HA but there's no information regarding DR setup. All it says is setup a log shiping which we already know but there's no procedure to setup SAP on the DR site(Passive SAP central instance)
    My original question still stands :
    - Is system copy the only option that we need to perform at the DR site in the event of failure ( Assumption is that we ieve make the secondary database as primary and also sync file system for JAVA using SAN replication technologies)
    - We have to achieve an RTO of 1 hour which is not possible in this case as performing system copy using MSCS HA option will take few hours to setup and test.
    -The link "http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm" shows that we can have SAP PAssive central instance. Whats the procedure of installing this Passive instance on the secondary site so in the event of failure all we do is make the secondary database primary and bring the SAP system online(installed already - no system copy performed) and also file system is already is sync.
    Thank you.
    RA

  • Machine Specs for installing SAP NetWeaver 7.0 - Java Trial version.

    Hi,
    can we install SAP NetWeaver 7.0 - Java Trial on windows x64 OS/machine or all the trail versions work only on 32 bit OS/machine?
    I tried installing SAP NetWeaver 7.0 - Java Trial it on my laptop (Win XP 32 bit) and on a Server (Win 2003 server x64 bit), it failed.
    Is SAP NetWeaver 7.0 - Java Trial version specifies any particular configuration on which it will work perfectly fine without any issues?
    your help would be highly appreaciated.
    thanks,

    Only work with 32bits
    SAP NetWeaver 7.0 Java Trial Version System Requirements
          Operating System: Windows 2000 (Service Pack 3); Windows XP Professional (Service Pack 1) or Windows Server 2003
          NTFS-File systems
          Internet Explorer 5.5 or higher or Firefox 1.0 or higher
          At least 1 GB RAM, 2 GB are recommended
          Intel Pentium III/1.1 GHz or higher (or compatible)
          14GB free hard disk space (8.6 GB for the installed software and 4.9 GB for the installer software)
          High-resolution monitor (1024x768 or higher, 256 colors)
          Sun Microsystems J2SE SDK version 1.4.2_XX or 1.4.2_XX (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_XX/index.html. Please note that version 1.4.2_10 may cause installation problems.
          If you have already installed SAP products on your computer, you must ensure that none of the systems are called "J2E".
          The file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP) must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
          If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. This is described in detail within the contents of the download package.
          To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activatetial file and activate it using a unique password. Download the latest credential and password from SDN.
    check the points if i help you

  • Application Help for Query Designer for Netweaver 2004S

    Does anyone know how to install the Help Files for the Business Explorer Tool for Netweaver 2004S?  When I click on the Help>>Applicaton Help from any of these tools, it states it can't find the files.  I have it setup and working within ABAP.
    Thanks,
    Jeff Cook

    The help dvd that came with upgrade explains how to setup for the ABAP side, not the Query Designer.  Do you know the parameter settings?  Does Query Designer help use the sapdoccd.ini file?
    Thanks ,
    Jeff

  • Correction instructions for Netweaver JAVA

    Hello.
    Can someone tell me how you implement correction instructions for Netweaver JAVA modules, here portal-apps (mss) ?
    Or at least put me on the right track ?
    I have a note that needs to be implemented which contains JAVA (JSP) source code, which alternatively can be implemented via SP.
    Can this be done via NW Developer Studio without NWDI ?
    I have not found any info regarding this, any help is appreaciated.
    Best Regards Gerhard Andreassen.

    check this Note 872892 - JDI NWDI Cookbook for ESS XSS

  • No data Found for Query with hierarchy in 2004S SP10 in JAVA Stack

    Hello,
    I have typical issue while running the simple query in ABAP Web and JAVA Web (RSRT) with One row and one column. The char in the row is restricted with external hierarchy.
    If I run in ABAP web, I get the results.
    If I run in JAVA Web, No data found message displayed.
    Does any one come across this issue. Tried to get SAP note but not clear solution.
    If any one give me information where I can find the values used for query variable in the dictionary tables I might help in my investigation.
    Advanced thanks.
    Ramana

    Hello,
    Sorry I missed a point.
    The char on which the hierarchy is resferencing char. Effectively using the hierarchy of referenced char.
    Thanks.

  • FTP link for SAP NetWeaver 7.0 - Java Trial Version on Linux - VMware Editi

    Is there a FTP url I can use to download SAP NetWeaver 7.0 - Java Trial Version on Linux - VMware Edition?
    TIA

    Hello,
    I've been trying to download the files several times as well. Each time the files (all 3) appeared currupt too. Has anybody been able to download the files in the last 2 weeks?
    Or any other tips?
    Thanks,
    Harmen

Maybe you are looking for

  • Missing photos in iPhoto '08 v. 7.1.3

    This is hardly a "new" topic on this discussion but after trying every recommendation I have been able to find, I am still no further forward so would appreciate any other suggestions that might be forthcoming. When iPhoto is launched it shows, at th

  • Windows crashes on playing video in itunes

    on playing videos on itunes, my laptop is getting crashed. the OS which is been used  is Windows 7

  • Regarding module pool programming,reports and gui status

    hi,    I have created a mpp program in which i called a report using the SUBMIT statement.In the Report i have used Gui status for BACK.When i execute the MPP and press BACK it should call a another screen of the MPP,but it leaves to the program i.e.

  • Please help me get my music back!!

    Our Windows Vista computer crashed (blue screen of death) but we were able to copy everything from to an external hard drive including my itunes folder.  On our new computer (Windows 7) I downloaded itunes.  Imported the music library into iTunes and

  • Can i have two separate icloud accounts for my devices

    My iCloud stoarge is filling up because it is all the stuff from my iPad and iPhone.  can i have separate accounts so i can have a full amount of storage on each instead of it sharing.  Also, if i can, would it sync to my iCloud on my Mac Pro?