Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

Similar Messages

Enterprsise search error - HTTP server error: 503 (Errorcode 7266)

HI
i am geting following error when serching docs in portal using TREX..
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Indexing document failed. Communication error. HTTP server error: 503 (Errorcode 7266)
Regards
Buddhike

Hi,
Can you please check the information and links given in the below threads. These will give more information of checking the HTTP Server etc..
https://forums.sdn.sap.com/thread.jspa?threadID=84269
https://forums.sdn.sap.com/thread.jspa?threadID=23496
https://forums.sdn.sap.com/thread.jspa?threadID=71527
Raghavendra

TREX - Search Failure - HTTP Server error: 503 - Queue Server down

Hello,
I've got a problem with TREX, the following tasks results in erros:
Default Search
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Creating Index
Error 503
- On Index Administration: indexes status are green
- On TREX Monitor: Takes long time to loa. HTTP Server and Name Server are green. There is no entry for Queue Server
- On TREX Monitor > Display Queues: Takes a long time and then no queues are displayed
- On Portal Monitor > Request Overview: Requests for TREX takes pretty long time
Starting Time: 9:16:23 AM
Starting Date: May 19, 2010
Request Name: NW:J2E:SRV:HTTP
User ID: <my user>
Outbound Data: n/a
Duration: 395671
CPU Time: 5812
Component Entries: 26
Component with Largest Net Time: EP:KM:TREX:HTTP:<host>:30205
Largest Net Time: 38867
Component with Largest Net CPU Time: EP:PRT_render:.../com.sap.km.TrexMonitor
Net CPU Time: 5674
Could you help me with procedures or guides on how to solve the problem and start the queue server?
kind regards,
Rafael

BASIS team reseted TREX and it's working again

TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
<b>error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.</b>
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

Index could not be created

Hi All.
I have instaled TREX and then declared the name server and port in visual admin and restarted portal
But still getting the error
Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Any suggestions or procedure to integrate portal with TREX ?
Thanking You,
Rukmini

Hi,
if this is your exact error message:
creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Than you have not changes the value <trexhost> do your real trex name server host name.
And that's why all the lights in TREX monitoring from your application point of view must be red.
Best regards
Frank

PARCONV phase Index could not be created ERROR

Upgrading Solution Manger 3.2 to 7.0 Windows Nt SQL Server 2000
We are in teh PARCONV phase now and getting errors regarding tables with missing indexes.
Example from PARCONV.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.TS3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
Long text:
    Cause
      It was not possible to create the index in the database.
      This could be caused by the fact that an index with the same name
      exists in the database, but it is unknown to the ABAP/4 Dictionary.
      Activating the index in the ABAP/4 Dictionary is possible, but it is
      not possible to create it in the database.
    System Response
    What to do
      For more information about the cause of the error, analyze the SQL
      error messages in this log.
2EEGT221 Creation of secondary indexes for table "BBP_PDHGP" failed
Long text:
    Cause
      There might be a SQL error.
    System Response
    What to do
      Check the SQL codes for errors.
2EEGT239 Error in step "BBP_PDHGP-STEP6"
2EEGT094 Conversion could not be restarted
Long text:
    Cause
      The conversion could not be restarted, i.e. it was not possible to
      continue the conversion at the point where it was interrupted.
    System Response
    What to do
      Information about the cause of the error can be found in the restart
      log.
2EEGT236 The SQL statement was not executed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have gone into se14 the index name exists but the index doesn't exist on the database. I've tried using the Create to create teh index on the databse but that fails with a name may already exist.
How to I clear these errors?
Thanks
Laurie McGinley

It appears on all the ABAP Dictionary: Restart Log List, that the same error is occuring on creating the secondary indexes...
Database error 170 at EXE
Line 1: incorrect syntax near '('
Same error occurs if I use the SE14 to "Continue Adjustment".
Note 1180553 u2013 Syntax error 170 during index creation on SQL 2000 and
Note 1346662 u2013 Avoid index creation errors in 7.0 EHP and higher upgrades.
Note 1365755 - Scripts to fix fillfactor issues on SQLServer 2000
These seem to be the key.... but...
I ran the scripts in 1180553 ... no change in the errors. In fact, there isn't a dbo.[TATAF~] table and the dbo.[TATAF] table doesn't have the 'With fillfactor" entry. So i wonder if I'm at a different phase?
I'm looking at 1365755 and think I'd like to give that one a try, but it says to unpack the ZIP file in the <upgr dir>\abap\bin directory. Well there isn't one. I have the upgrade dir \usr\sap\put and its subdirectories, but no \abap\bin dir.
So I'm not sure where to unpack this to give it a try.
Perhaps it would be better to go back to teh beginning of the UPGRADE (after PREPARE) and start again?
I didn't upgrade to SQL Server 2005 because the version of SolMan we are on isn't certified on it, so thought I'd get through the Sol Man upgrade then do SQLServer 2005... maybe need to rethink this to?
I'm open you suggesions, ideas, answers!
Thanks
Laurie McGinley
Edited by: Laurie McGinley on Sep 28, 2009 12:23 PM

XML document could not be created because server memory is low( SCOM 2012 R2).

Hi
I am facing below issue in the scom 2012 r2.
please find the error below
On SCOM MS:
Alert name :Data Warehouse relationship synchronization process failed to write data
Alert description :Data Warehouse relationship synchronization process failed to write data to the Data Warehouse database. Failed to store data
in the Data Warehouse. The operation will be retried.
Exception 'SqlException': Sql execution failed. Error 6624, Level 16, State 1, Procedure sp_xml_preparedocument, Line 1, Message: XML document could not be created because server memory is low. Use sp_xml_removedocument to release XML documents.
Event id in Operation log:
Event id :33333
Data Access Layer rejected retry on SqlError:
Request: DataWarehouseSynchConfigChangeTypeGet -- (InstalledManagementPackXml=<ManagementPacks><ManagementPack>7b9f4239-7351-e72b-4ce4-d6c56ddb401d</ManagementPack><ManagementPack>848edb97-9da5-e2ae-24d4-56...),
(RETURN_VALUE=-6)
Class: 16
Number: 6624
Message: XML document could not be created because server memory is low. Use sp_xml_removedocument
to release XML documents.
ON SCOM DB server:
SQL version : SQL 2012 SP1 X64 bit Host all SCOm db (SCOM DB,SCOM DW,Reporting)
Ervent id : 28005 ,Application log,source: MSSQLSERVER
Please suggest me in this regard.
Thanks
sridhar v

For fix error 33333, you can refer below links
http://opsmgradmin.blogspot.com/2011/05/scom-event-id-33333-in-scom-from-source.html
http://systemcenterblog.blogspot.com/2009/11/error-id-33333-data-access-layer.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

BootCamp Assistant Error : Your bootable USB drive could not be created. "An error occurred while formatting the disk."

I have a Windows 7 Ultimate .iso file saved onto a "Mac OS Extended (Journal)" formatted USB flash drive. I am trying to install it with BootCamp Assistant and I keep getting the error message : Your bootable USB drive could not be created. "An error occurred while formatting the disk."
I have previously installed Windows 7 on my Mac (and it worked flawlessly - same .iso file), but I uninstalled it because I didn't partition enough space on my hard drive. I have used several flash drive to try and install and none have worked.
Some help would be greatly appreciated.

The Boot Camp forum is located here: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/

How do I fix the following error message: HTTP Server Error 503?

I no longer can access the Internet by pressing the Internet button on my computer. I receive the following error message: HTTP Server Error 503. How do I fix that problem.

http://pcsupport.about.com/od/findbyerrormessage/a/503error.htm

Could not launch Adobe Stabilization Server Error

Hey Guys, I'll take you down the road I've been traveling on for the past few hours.
- Installed CS5.5, everything runs smoothly for the first hour, then I close After Effects,
- Open it back up again, and receive the "Quicktime in not Installed, some plugin's will not work" So I research that fully, realize it isn't actually a problem and stop thinking about it. I also get an Output Module Error on Startup.
- I gather some clips together 1920x1080 23.976, normal 60D footage that I was testing to see stabilized, since it worked very well on my 7D footage (But I doubt its the footage that is causing the problem.
- When I drag, or go into effects and add Warp Stabilization to the clip, I get this error:
"After Effects error: Could not launch Adobe Stabilization Server. (514) ( 25 :: 101 )"
- And nothing will happen, can't analyze the footage or the error will pop up again.
My Mac:
MacbookPro 17inch
2.2Ghz Intel i7
4GB memory
Running it off of my 1tb 7200rpm external hard drive.
My Firewall is off (turned it off to test one of the Quicktime error solutions, I've had it both on and off, and both problems stay the same)
So throw me any bits of info, I know this has been out for exactly a day, but this sucks. I'm just glad that I'm testing it now, and not later
Thanks guys,
Zac

Sorry to hear you're having trouble with the new Warp Stabilizer. We did have a couple reports of this exact problem during beta testing, but were never able to get it to reproduce for us, or even for the beta testers that experienced the problem.
Some steps/questions:
0) Take a screenshot of all your running processes using Activity Monitor and Cmd-Shift-4.
1) What are your _exact_ steps to reproducing the problem (there are many ways to invoke the stabilizer, for example)?
2) Did you successfully use Warp Stabilizer before on this machine? (I see you already used it on 7D footage successfully)
3) Does it still happen after you quit & relaunch? (with no other apps running)
4) Does it still happen after you reboot & relaunch?
5) If it still happens, try turning Multiprocessing on in the prefs, click OK to dismiss the dialog, then bring it back up and turn Multiprocessing off, and OK again. Then stabilize. Does that help?
If you get it working, please repeat step 0, then post both pictures comparing before & after.
Thanks,
DaveS (Principal Scientist, Adobe Systems)

"Index could not be created: There are no active http servers known at the

Above error shows up during Index creation on KM section of the portal.
Checked the TREX Admin tool for Http connection . Pop up Error saying "IIS not installed. Configuration of Http communication not possible ".
Environment : TREX 7.1 revision 43 on Windows 2003 64 Bit platform.
During installation of standalone TREX , there were no option to select "http server".
Please suggest, if i am missing some thing in the setup or configuration here.
Thanks in advance .

1.) You need to make sure that the server you are installing TREX on, also has a Web Server. In your case, Internet Information Services (IIS 6.0) which comes with Windows Server 2003. Once this is installed make sure that it is working (http://hostname or IP).
2.) TREX 7.1 Rev 43 is very mature and does not involve many steps during installation. Your only option is to choose whether you want to install it or not.
3.) Setup of the "http connection" or "ABAP connection" is done after TREX installation. This is done straight from TREX Administrator.
Here is my suggestion:
1.) Install IIS 6.0 (http://www.windowsreference.com/windows-server-2003/step-by-step-guide-how-to-install-iis-60-in-win-server-2003/)
2.) Reinstalling of TREX is higly recommended but you can try it with the current installation.
3.) Open up TREX Administrator (trexadmin.bat) and proceed with create IIS Websites for TREX 7.10. The steps are located under the heading "Configuring the TREX Web Server" in the installation document.
4.) After this, go on with Indexing.
Regards,
Ravi

EAS Console Error - Could not connect to Administartion server

Hi All,
Installed 64 BIT EAS on windows 2003 server R2 (64 BIT)
Oracle Application Server (32 Bit) is used as a java application server.
Configuratio of EAS was successfully completed but when i try to login into the console "Could not connect to Administartion server" error message appears.
Checked "C:\Hyperion\logs\eas\easserver.log" which says:
Information message (May 23, 2011 10:26:36 AM):
Initializing AppManServlet
Information message (May 23, 2011 10:26:36 AM):
EAS_HOME=C:\Hyperion\products\Essbase\eas
Exception message (May 23, 2011 10:26:36 AM):
C:\Hyperion\products\Essbase\eas\server\bin\EnvironmentJni.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
          java.lang.UnsatisfiedLinkError: C:\Hyperion\products\Essbase\eas\server\bin\EnvironmentJni.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
               at java.lang.ClassLoader$NativeLibrary.load(Native Method)
               at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
               at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1676)
               at java.lang.Runtime.loadLibrary0(Runtime.java:822)
               at java.lang.System.loadLibrary(System.java:993)
               at com.essbase.eas.utils.Environment.<clinit>(Unknown Source)
               at com.essbase.eas.server.AppManServlet.init(Unknown Source)
               at javax.servlet.GenericServlet.init(GenericServlet.java:256)
               at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2528)
               at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:5006)
               at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4930)
               at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:5118)
               at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1283)
               at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:848)
               at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:435)
               at com.evermind.server.Application.getHttpApplication(Application.java:592)
               at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:2280)
               at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:2199)
               at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1833)
               at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:304)
               at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:120)
               at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:92)
               at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:825)
               at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:276)
               at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:100)
               at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
               at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
               at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
               at java.lang.Thread.run(Thread.java:595)
Warning message (May 23, 2011 10:26:36 AM):
java.library.path=C:\product\10.1.3.1\OracleAS_1\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\product\10.1.3.1\OracleAS_1\opmn\bin;C:\product\10.1.3.1\OracleAS_1\opmn\lib;C:\product\10.1.3.1\OracleAS_1\bin;C:\WINDOWS;C:\WINDOWS\system32;C:\Hyperion\products\Essbase\eas\server\bin
"

Have a read of - "Can't load AMD 64-bit .dll on a IA 32-bit platform" When Starting Essbase Administration Services (EAS) [ID 848673.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Certain Http Server Errors not visible in logs for Azure Websites

I noticed that a lot of times (but not every time) Http Server Errors on my Azure Website (an ASP.NET MVC app) don't show up in any logs, although they are recognized by Azure. E.g. I get alerts that Http Server Error count > 5 in the last 15 minutes,
I see the error count on the Portal under Monitoring/Requests and errors however these errors are not visible in my application's own logs or in the eventlog.xml. Thus I also can't troubleshoot them.
Now I'm not totally sure (and can't find any hints about) what exactly "Http Server Errors" mean in Azure terminology but since 4xx errors are handled separately by alerts I'd guess these are 5xx errors. If indeed then I don't understand why there
are apparently errors happening that are not visible at least in the event log?

Hi Zoltán Lehóczky,
For your issue ,I suggest that you could try to enable site diagnostics and application diagnostics in Azure Management Portal.
In site diagnostics ,it will logs Detailed Error Logging which logs detailed information for HTTP status codes that indicate a failure (status 400 or greater).
Then you could access the folder "/LogFiles/DetailedErrors" via Ftp to check Detailed Error Logs which provide any HTTP errors have occurred.
For more information ,I suggest that you could refer to the link below:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-enable-diagnostic-log/
Best Regards,
Kevin Shen.

Configuring OS X Server 3.1.2 : server.app fails with "Could Not Connect to the Server"

Hi All,
I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't giving any indication of the reason of the failure.

Hi Linc,
Thanks for you prompt reply, below are the logs....
9/15/14 7:56:58.229 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:28.287 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:58.315 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:24.653 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:58:28.379 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:58.428 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:13.752 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:59:28.496 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:58.568 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:06.460 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:00:16.854 AM Console[369]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
9/15/14 8:00:28.567 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:58.623 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:16.101 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:01:28.668 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.596 AM WindowServer[95]: CGXGetConnectionProperty: Invalid connection 42003
9/15/14 8:01:53.752 AM ocspd[84]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7fa6c9e102a0> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.954 AM com.apple.serveralertproxy[386]: ApplePushService: APSConnection being used without a delegate queue
9/15/14 8:01:58.666 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:14.303 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:02:28.669 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:58.697 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:10.186 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:03:28.699 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:58.726 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:04:06.022 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:04:28.782 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)

HTTP Server Error - 403 Forbidden

Hi all
i was checking the performance of my application server, in HTTP Server (AS instance, not infrastructure instance)
HTTP Server error rate is high, drilling down if found that i have an unusual number of 403 - Forbidden errors.
In the access.log of http server i found the following:
10.42.40.73 - - [05/Apr/2006:15:13:43 +0100] "OPTIONS /cotacoes/ HTTP/1.1" 403 119 10.42.48.237
10.42.40.73 - - [05/Apr/2006:15:13:43 +0100] "OPTIONS /cotacoes/ HTTP/1.1" 403 119 10.42.48.237
10.42.40.73 - - [05/Apr/2006:15:13:43 +0100] "OPTIONS /cotacoes/ HTTP/1.1" 403 119 10.42.48.237
10.42.40.73 - - [05/Apr/2006:15:13:43 +0100] "OPTIONS /cotacoes/ HTTP/1.1" 403 119 10.42.48.237
10.42.40.73 - - [05/Apr/2006:15:13:43 +0100] "OPTIONS /cotacoes/ HTTP/1.1" 403 119 10.42.48.237
10.42.40.73 - - [05/Apr/2006:15:13:43 +0100] "OPTIONS /cotacoes/ HTTP/1.1" 403 119 10.42.48.237
10.42.47.237 is the ip of the Application Server
/cotacoes is the path to an application that is deployed in OC4J ( this application is built with B4CJ framework)
i have asked the programming team to find the piece of code that was generating an OPTIONS request to the server, they could not find any reference to an OPTIONS request in all application code.
Is it some configuration in OC4J container ? or some option in BC4J ??
my environment:
Oracle Application Server 9.0.4
Hp proliant dl580 server
Windows 2003 enterprise server
Best Regards
Rui Madaleno

I spoke again to my local Nokia dealer and they say the problem is in my Exchange user.
My IT people say that my user is exactly the same as the rest of the people in the company…
Can anyone think of a solution???

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Similar Messages

Maybe you are looking for