Trex Issue - Search Results Mysteriously Disappearing

Hello All-
I have a strange issue with my TREX searching.  Here's what is happening - I run a search, the results come back saying there are x hits.  If I start paging through the results, I get about 1/2 to 2/3 of the way when suddenly the hits drops to some number less that x hits.  Where have the remainder of my hits gone?  I've checked out SAPNotes and SDN but haven't had any luck.  Has anyone seen this behavior before?  My guesses are that it is either hiding duplicates (and I'm missing some sort of switch) or some of the results are bogus (for instance, I have some documents that won't preprocess and perhaps these are coming up as bogus hits).
I'm on EP6 SP 14/KM SP 14/TRex 14....
Thanks and points given for any help what so ever in sorting this out!
Jim

Hi Jim,
the number of search results is the total number that fits to your search term without any respect to the permissions.
But the search results that are displayed on the result page are only those that you are allowed to see. As a consequence, you can only see new pages with search results as long as there are additional search results that you are allowed to see
Kind regards
Karin

Similar Messages

  • IPhone 4S v7.1.2,safari search result- page disappears!

    Can anyone tell me why, when reading a page - the result of safari internet search, the page drops and is replaced by lists of "for sale" apps? I find this most annoying. I've had this phone for a while and used it mostly as a phone. I took advantage of a Siri search and found something of interest but before I could finish reading the multiple pages it just all disappeared. Ask Siri the same question to try and find it again was a joke. Same question, different results. I did finally locate page again, but before I could write down the web address, the page vanished again!  (I now know about bookmarks feature...)   Is this normal functioning for this phone?

    Same here. Also can't stand not being able to view attached picts the same way as before either.

  • Search Results Window Disappears

    When I go to Edit --> Search a window pops up and i can input my search term. Usually this will then display a Results: output with all the results listed below which I can see them in context. Now, this window closes immediately and i have to manually click through the results on the page. Any way to get this thing to stick around?

    I guess that this is "by design". I'm observing exactly the same behaviour (annoying behaviour  ).

  • Y50-70 Touch Display issues but then mysteriously disappeared?

    Hi, I brought a Y50 Touch to the Philippines for two weeks. At first everything seemed fine and then one day I woke up to the display not functioning. I knew it couldn't have been a software issue because it was happening at from system startup. After draining the flea power it still wouldn't work, but after some random fiddling for about an hour or two it started to work again, but I noticed the screen flickered a bit before setting. Okay. Into my second week it started acting up again, and nothing I could do would fix it. The problem became worse. I had horizontal lines and screen flickering ranging from random and dispersed to constant and unusable, to points where it would just stop working altogether. I suspected it was an issue with the display connections, but trying to fix it myself was definitely something I did not want to do. Then, after keeping it in an air conditioned room all night, it just started working again. And it hasn't acted up since.So I guess my question is, should I go ahead and send it in to avoid having this problem creep up again? Or was the problem potentially because of air elements in SE Asia/the temperature?

    Follow-up: After long phone call with Lenovo Tech Supprt - still no acceptable resolution. 
    Only resolution offered by Lenovo is to send it in for repair - at our cost - since damage is considered cosmetic and not covered under warranty...on a 60 day old machine!  Seriously, this is the worst customer relations experience I've ever had.  Please don't anyone else purchase a Y50-70 model, as we aren't the only ones to have this problem and Lenovo isn't standing behind their product. 

  • Why do google search results reset to match the search bar terms when i use the back button?

    Since the update to FF 23, the list of Google search results clears and the on-page search box is reset to match the address bar search box when I hit the back button to re-view the results list after checking a result.
    To see this issue for yourself, set your search provider to Google and make sure Instant is on. Type a search term into the search bar and press enter. A google page appears with your results list. Now, change your search terms or conduct a new search directly from the google page (without using the FF search bar). Click on the first result in the search list, then click the back button to return to the search results so you can check a differest result. As FF goes back to the google page, it will reset the on-page search box to match the FF search bar (although you were no longer on this search) and all search results will disappear, replaced by the message "Press enter to search". Pressing enter reconducts your old search, not the one you were on.
    This is incredibly maddening since searching for something requires frequent use of the back button to check through the list of search results, and then frequently trying the search again with slightly different terms. Although it sounds like a Google issue, it did not occur on the old firefox and has me wanting to revert. I tried to revert to the old search function via the "keyword search" addon, but this did not fix my issue. Is there a way to force FF to go back to the actual google search page I was just on instead of conducting a new google search from the FF search box when I hit the back button?

    In Firefox 23 versions and later the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar via the keyword.URL pref.<br />
    The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.<br />
    Current Firefox versions do not update the about:home home page until you refresh the page (future versions will do this automatically without a refresh) and that is what happens if you use the Back key.
    You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
    * Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/

  • OHJ- IcePDF issue:  The search result disappears upon multilple clicks on s

    Hi,
    When any pdf opens and we search for a text in pdf using "Search Text", the result gets displayed in the "Results" section. But if i click on search multiple times for the same word or any other new word, the search does not return any result. In other words the result gets disappeared from the "Results" section and re-appears after a few clicks. This is easily reproducible upon multiple click on "Search" button. It has been noticed that the result count is correctly seen but no result is seen in the "Results" box when this issue occurs.
    Any resolution will be appreciated.
    Thanks.

    Hi,
    When any pdf opens and we search for a text in pdf using "Search Text", the result gets displayed in the "Results" section. But if i click on search multiple times for the same word or any other new word, the search does not return any result. In other words the result gets disappeared from the "Results" section and re-appears after a few clicks. This is easily reproducible upon multiple click on "Search" button. It has been noticed that the result count is correctly seen but no result is seen in the "Results" box when this issue occurs.
    Any resolution will be appreciated.
    Thanks.

  • Trex "synonym search" and  taxonomy "search from here" issues

    Hi Trex experts
    I have two minor issues regarding Trex and Taxonomies
    <b>Taxonomy</b>
    I have created a Taxonomy and need to add the “search from here” function so it’s possible to create a more specific search from within one are of the taxonomy.
    When I add a layout set where this command is enabled then it’s not shown.
    I guess that it’s my repository manager for the Trex repository that I need to add a service to, but I can’t figure out which one, or is this feature not possible for taxonomies?
    <b>Trex</b>
    Is it possible to define “synonym” search entries? Like I need to create a dependency on a bunch of terms, like when a user for example search for “vacation” then search for “holiday” should be included automatically in the search result as well. Is there some kind of configuration file where I can add a list of dependencies?
    Thanks in advance
    Regards
    John

    Hi John,
       Related to synomym you should read this material:
    "How to Enable Semantic Search or Search for Synonyms in TREX"
       Related to taxonomy, the answer is yes it is possible.
    If "search from here" botton is not shown, is due to you don't create an index (search option).
    Patricio.

  • Error when opening a pdf by clicking a search result. Link works fine when opened any other way. IE issue only.

    The issue:
    www.norwich.gov.uk
    When you carry out a search for "co-operative bank" and click the first result (which is a pdf), Adobe Reader is launched and the user sees this error: "There was an error opening this document, The filename, directory name or volume label syntax
    is incorrect"
    However, if you do any of these...
    right-click the link and choose to open it in a new tab
    right-click the link, copy the shortcut, paste it into the address bar and hit go
    open the file directly from the library
    open the file by clicking on a hyperlink
    ... you are prompted to Open or Save the file. On choosing 'Open' the file is opened in the browser window with no problems.  It is only when clicking on the link in the search results that the issue arises.  The issue only occurs with IE.
    Current settings:
    Client integration is disabled
    Browser file handling is set to permissive
    Default open behaviour for browser-enabled documents is set to open in the browser
    DOCICON.xml is configured to show <Mapping Key="pdf" Value="icpdf.png" EditText="Adobe Acrobat" OpenControl=""/>
    Disabling the Adobe Acrobat SharePoint Opendocuments add-on 'fixes' the issue, in that the user no longer sees the error, but instead sees the prompt. However, this doesn't help us as the site is public facing asn we cant control user's add-ons.
    Hope someone can help.

    I tried this from my laptop with IE8 and it worked fine.
    I trust that answers your question...
    Thanks
    C
    |
    RSS |
    http://crayveon.com/blog |
    SharePoint Scripts | Twitter |
    Google+ | LinkedIn |
    Facebook | Quix Utilities for SharePoint

  • Using "Restrict by app" in change query causes issues with Search Results

    Hello!
    I am hoping some experienced SP admin can help me out. I am having issues with the relevance ranking for my search results web part.
    I created a Wiki (OOTB) within a site collection and on the home page of the Wiki I was looking to apply a Search Box and Search Results web part for easy searching. I wanted to ensure the search results were restricted to the scope of the pages within the
    wiki. I did the following after adding the 2 web parts:
    Entered edit mode for the page
    Started to edit the Search Results web part
    Under Properties for Search Results clicked on "Change Query"
    Navigated to BASICS and clicked "Switch to Quick Mode"
    For Select Query, picked "Wiki (System)" option
    For Restrict by app, picked "Specify a URL" and input the wiki URL "http://webapp.com/sites/sitecollection/wiki"
    Click OK
    The web part has 6 automatic results when I hit the page. These are the only 6 pages in my wiki. When I search a word or title of a page, they are not ranked in order or relevance. The ordering is static to what was being shown before the search, but the
    keywords I'm searching are bold. With out the taking the steps above, I can easily search these pages and have them ranked appropriately so I'm not too sure what I'm doing wrong. 
    Other Details
    The pages have been crawled and can be searched from anywhere else in SP.
    I am only a site collection admin for this specific site collection.
    I other than the steps above, I have not made any changes or customization to the search web parts; they are both out of the box SP.
    The SP Farm admin we unable to pin point what the root cause is either.

    Hi Mikael,
    Sorry for the wait, I was unable to post pictures, which i felt would better describe my issue.
    Could you output the query template you are ending up with?
    If you can tell me how to accomplish this, then I can provide it. Please keep in mind that I am only a site collection admin.
    Also, is the ranking/sorting for your webpart set to ranking?
    When looking at the web part settings, I didn't see an option to modify the ranking. Unfortunately, some sites in my intranet are down now so I can't even double check. Once it's back up, I will verify this as well.
    And how do you know they are ranked incorrectly?
    I wanted to display an image showing what I meant by this. As the wiki is down, I'll do my best with words. When I visit the wiki home page, I already have the search and search results web parts there. Without searching anything, the search results
    web part displays 6 pages that are available in the wiki. When I search, I expect to see the most relevant result at the top. similar to the following: 
    *Search result from another section of the intranet site.*
    What I receive instead is the same list of wiki pages, in the same order. The most relevant result
    is not moved to the top like in the image above, but I can see that the word "rush" is highlighted in bold. I hope this helps.
    If you need more of a description, please let me know.
    Thank you

  • Unable to retreive custom properties for WPC pages in TREX search result

    Hi All,
    We have created couple of custom properties "custom_news_heading" and "custom_news_abstract" which are indexable and made it available for all folders and documents.
    In web pages folder in one of the WPC web site we have created few pages. In details screen for those pages  we have updated those custom propeties with some text.
    We have created an Index out of that web pages folder and able to see indexed count as same as the pages inside the web pages folder.
    For that index the "Display Index Details" screen in TREX monitor is not showing up the custom properties - means TREX is not considering those custom properties even if have flagged it as Indexable.
    Search result is returning the properties like "display name", contentlength etc. But we are not able to reterive the custom properties by customizing the Collection Renderer's Diaplayed properties.
    Any advice please?
    Thanks

    Hi Dhaya/Scotts,
    Please upload an image of ur layout setting and also the collection renderer in the
    [Wiki|https://wiki.sdn.sap.com/wiki/x/IACnB] page that I have created for this thread...
    Regards
    BP

  • Issue in disabling button and retaining search results of query bean

    Hi,
    I need help in 2 issues
    1) I have a query bean and an advanced table attached to it. I have enabled table actions and put a button inside that. The requirement is the button should be enabled only if a record is present in the advanced table. If for a search parameter, no results are displayed in the advanced table, the button should remain disabled. The moment the results are populated in advanced table the button should be enabled. Please let me know how this can be achieved.
    2) In the advanced table there is a column of type Link. On clicking this link i am forwarding the control to some other OAF page AA. I am retaining AM here. From this new OAF page AA user can move to some other OAF pages B or C. All these pages have different AM. There is a link called return to original page on page AA which takes user back to the search screen. When user goes to page AA and comes back to search screen without going to page B or C the search results are displayed on the page, but when user goes from page AA to page B or C and finally returns to the search screen, the data in search results along with search criteria are lost. The search screen is completely blank.
    I need to display the search results/search criteria no matter what navigation user is doing. Is there a way i can save the search query that got executed on the click of search button. I can re-execute the query when user comes back on search screen.
    Please let me know how to achieve these 2 functionalities.
    Thanks,
    VG
    Edited by: VG on Sep 6, 2011 2:55 PM

    For (1)
    I guess you want to select single/multiple rows after the table is populated in table and perform an action using button.
    If that is the case then do not put button under table actions. Instead put it under multiselection region. Then button only gets displayed when rows are populated.
    If that is not the case then get a handle to button (use findChildRecursive, findIndexedChildRecursive may not work) and disable/enable it.
    For (2).. If you are on r12 below can be useful :- (taken from 12.1 framework guide)
    Using Search Persistence
    In the past, if a user performed a search and then drilled down to a details page, search criteria was lost when
    the user navigated back to the Search page, unless the developer retained the AM or created a custom
    implementation to persist the search criteria. As of Release 12, developers no longer need a custom
    implementation to persist search criteria, as the query region now has an automatic search persistence
    mechanism in place.
    Generally speaking, you should still retain the AM in favor of using the automatic search persistence
    mechanism for performance optimization reasons. However, if retaining the AM presents a scalability issue
    because the underlying view object (VO) had hundreds of attributes, then you should you turn off retainAM and
    allow the query region to automatically handle all the search criteria binding and use the automatic search
    persistence mechanism.
    Note: If you retain the AM state, the automatic search persistence mechanism will not be active. The search
    persistence mechanism is automatic only if the AM state is not retained.
    When a user selects the Go button to initiate a search on the query region, the OAQueryBean automatically
    caches the search criteria on the user session. After the user drills down to the detail page of the Search
    results and then returns to the Search page, the OAQueryBean restores the search criteria from the cache and
    re-executes the query using that saved critieria.
    Note: Since the query is re-executed, any sort, navigation or transient UI state of the results table will not be
    preserved. Saving the entire table state presents high overhead which is what this particular feature is trying to
    avoid.

  • I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

    Question
    I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Issue while navigating through a search result link

    Hello Experts,
    We are facing a strange issue in our IC Web Client UI.
    After an account is confirmed, and a wild card search is done on the Product Search work centre, a number of results are displayed in the list view below ( which extend to more than one page). The search result has a particular field 'Generic ID' which is a navigational link, and further filters the search results when clicked on it.
    The issue is, if the Generic ID is clicked from one of the serach result in page 1 or 2, it takes the control to the next stage filtered search result page 1. But if the Generic ID is clicked from any other page other than the first two, it takes the control to the next stage filtered search results page 2.
    I have debugged both the scenarios but there's no difference in the behavior of both.
    Any pointers to why this is happening or how it can be solved will be highly appreciated.
    Thanks,
    Richa

    Hi Prasenjit,
    Thanks for your inputs.
    I've debugged the scenarios, but I've been unable to locate any pointers to the current page, or the one being navigated to.
    An OSS in this case can't be raised as the link which is being clicked is a customization. Hence, anything after that would probably be because of the customizations made.
    Any pointers to where should I concentrate while debugging to find the current page number?
    Rgds,
    Richa

  • TREX Search Result Layout: Can you change it?

    Hi,
    Is it possible to have different flavors for the TREX Search Result Layout?
    Ideally would be through the use of parameters in the typical TREX URL.  I know that "Navigation.xml" file is hard-coded.....
    Thanks.
    Dick

    Hi Thilo,
    Thanks.
    But I want to use my new LayoutSet using the URL-based interface to TREX:
    https://xxxx.xxxx.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.service?startpage=searchpage&configfilename=navigation.xml&resourcelisttype=com.sapportals.wcm.searchresultlist&searchtype=ctrlpers&selectedsearchin=from_here&selectedsearchfromhere=/room_extensions/cm_stores/pm_storage/workspaces/d4919b6d-ff00-0010-439b-9a59dec17c56&querystring=dog&searchvisible=false&showoptions=false&allowedsortprops=false&selectedsearchaction=fuzzy&selectedmatchesperpage=5&enablesearchsorting=false.
    Dick

  • My playlist appears in itunes, but the music files have mysteriously disappeared in my iTunes Media file. Is there a way to recover them? Tried searching and cannot find them.

    My playlist appears in itunes, but the music files have mysteriously disappeared from my iTunes Media file. Is there a way to recover them? Tried searching and cannot find them.

    This page might help: http://support.creative.com/kb/ShowArticle.aspx?sid=44083
    Older Zens don't support AAC, which is the format iTunes uses for songs.
    You can convert from AAC to MP3, which every media player under the sun will play.  Here's a tutorial: http://reviews.cnet.com/8301-12519_7-10096807-49.html

Maybe you are looking for