TREX logs to verify

Hi:
I'm having some trouble in classification problems. I want to view the server logs and the TREX logs.
But, i want to know, which are the name of the TREX logs i should review.
Thanks in advance,
Felipe

Hi Felipe,
One more question, do you know what crawler processes are for?
SAP describes it like that:
"The crawler service allows crawlers to collect resources located in internal or external repositories, for example, for indexing purposes. A crawler returns the resources and the hierarchical or net-like structures of the respective repositories.
Services and applications that need repositories to be crawled (for example, the index management service) request a crawler from the crawler service."
Link to the description
And how they work with the TREX ?
Another explanation from SAP:
"Crawlers are used in Knowledge Management to collect resources that are stored in internal or repositories. The resources found and the hierarchical or net-like structures are forwarded to various services and applications for further processing."
Link to it
So the crawler services check the internal and external repositories for new or updated documents and provide them for further processing to other services.
Hope it helps.
Regards,
Norman Schröder

Similar Messages

TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

Error opening installation log file | Windows

Event 7000 and 7001 in event log; cannot verify signature

On the user's system, the Workstation service will not start, preventing access to network drives through UNC paths.
The dependencies for the Workstation service (Browser Support service, SMB 1 redirect, SMB 2 redirect) are not starting because the system detects a problem with the digital signature for a file. For example:
The SMB 1.x MiniRedirector service depends on the SMB MiniRedirector Wrapper and Engine service which failed to start because of the following error:
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
I've run sfc /scannow a number of times, but that does not resolve the issue.
Suggestions, please!

I tried updating bowser.sys at an elevated command prompt using the following commands:
takeown /f C:\windows\system32\drivers\bowser.sys
icacls C:\windows\system32\drivers\bowser.sys /grant administrators:F
copy file-from-working-system C:\windows\system32\drivers\bowser.sys
The CBS.log from sfc doesn't indicate the directory in C:\Windows\winsxs to copy the file. There are multiple directories for the file, each tagged with multiple IDs. I used the same commands on the latest directory in \Winsxs, copied bowser.sys there, but
sigcheck shows that the file is still not signed.
Sigcheck v2.1 - File version and signature viewer
Copyright (C) 2004-2014 Mark Russinovich
Sysinternals - www.sysinternals.com
c:\windows\system32\drivers\bowser.sys:
        Verified:       Unsigned
        Link date:      11:55 PM 2/22/2011
        Publisher:      Microsoft Corporation
        Description:    NT Lan Manager Datagram Receiver Driver
        Product:        Microsoft« Windows« Operating System
        Prod version:   6.1.7601.17565
        File version:   6.1.7601.17565 (win7sp1_gdr.110222-1630)
        MachineType:    64-bit
        Binary Version: 6.1.7601.17565
        Original Name: browser.sys
        Internal Name: browser.sys
        Copyright:      ⌐ Microsoft Corporation. All rights reserved.
        Comments:       n/a
        Entropy:        6.178

How to see logs to verify scripting errors?

Hi,
I am completely new to SAP Sourcing. I am testing couple of scripts, but application is giving to error saying that 'The attached XPDL file contains one or more scripting errors. See log for additional information.' - Can someone please tell me where can I see logs?
Or what is the standard practice to test scripts?
Thanks in advance
Yogesh

Hi Yogesh,
Navigate to the following section Setup->System Administration->System Management->System Information->Logs and click on the first entry. That is the latest log file.
Thanks
Devesh

AllOnl + Log with Verify endes with error

Hi!
We would to set up a online backup + redo logs with the verification function for SAP ERP (EHP4) system.
By doing so we get a error within verification part of redo logs because of following RMAN commando.
> BR0278E Command output of 'E:\oracle\<sid>\102\BIN\rman nocatalog':
Unfortunately we do not need some RMAN checks.
Question
Is there some parameters in the init<sid>.sap that can remove this rman check within verifcation?
Thank you!

Can you check the value of backup_dev_type?
How does your full brbackup command line look?
Cheers Michael

Problem indexing with TREX

Hi guys,
We have some problems with our TREX system. This´s our environment:
- SAP Netweaver 7 - SP17 (SUN Solaris)
- SAP TREX 7 (Windows 2003 server)
- IIS 6 with SSO to File Server (SSO22Kerbmap configured)
The problem is that When indexing process is started, we detected that a lot of documents had preprocessing errors. We have in TREX log the following info for each file error:
2009-06-14 17:46:01.589 e preprocessor Preprocessor.cpp(00897) : HTTPHEAD failed for URL http://naspro01.xxxxxx.es:50000/irj/go/km/docs/departamentos/gc-idp/laboratorio/fichas%20de%20seguridad%20reactivos%20lab/merck_es_fichas%20de%20seguridad%20reactivos/1090/109033.pdf with Httpstatus 401
2009-06-14 17:46:01.589 e preprocessor Preprocessor.cpp(03553) : HANDLE: DISPATCH - Processing Document with key '/Departamentos/GC-IDP/Laboratorio/FICHAS DE SEGURIDAD REACTIVOS LAB/Merck_es_Fichas de Seguridad Reactivos/1090/109033.pdf' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6401)
More information:
- index_service user have super administrator rol in our system.
- We have some errors in windows log about sso22kerbmap library. The text is 'Application failure: w3wp.exe, version:6.0.3790.3959, module: SSO22KerbMap.dll,version 1.1.0.8 ...'
Can somebody help us to solve this problem?
Best regards.

Hi Julio,
did you check the following SAP Note ?
SAP Note 735639 - SSO22KerbMap: Known issues
Did you also create an Active Directory User for the user index_service ?
This is described on page 7 in my white paper "[Integration of Windows File Servers into the SAP KM platform using SSO and the WebDAV repository manager|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1f93f5c-0301-0010-5c83-9681791f78ec]".
Best regards,
André

Trex search failed, how to find the problematic property?

Hello,
I've created an index that runs over a repository which contains documents with lots of customised attributes.
When I run a search through this index I get: "Error during search occurred - com.sapportals.wcm.WcmException: attribute value is not a date or wrong syntax (Errorcode 6931)".
When I look at the Trex logs I see that the problem is with a certain property but Trex monitor only gives me it's encoded value: %42%50%42%53%54.
How can I track which property has got problematic data in it?
Roy

Hallo Roy,
We are facing exactly the same...
As a workaround, we deactivated the option "indexable" from the property editor (Content Management -> Global Services -> Property Metadata -> Property), for our property typed Date.
We opened an OSS message to SAP for the issue, and they replied us to "reconfigure the search Iview so that the search didn't take a place in these two attributes".
I suppose it means to create a custom Search Option Set, to exclude the property from the pool of "searchable in" properties.
Have you solved your issue in a different way?
thanks & regards
Gianluca

TREX search problem in collaboration room search

Hi,
I receive this error when I try to search from collaboration rooms:
Error during search occurred: com.sapportals.wcm.WcmException: multi-server search failed on some of the servers;error=2982,location=gruffi:31613;error=2982,location=gruffi:31643 (Errorcode 2975)
Search is performed using standard SAP iView: pcd:portal_content/com.sap.pct/Collaboration/iViews/com.sap.netweaver.coll.CMSearch
All the trex instances are green in trex monitor. Portal version is 7.0 SP15.
Any ideas how to fix that?
Regards,
Ladislav

Hi
i think the trex services in os is not started.
Please do the following:
1. Restart the TREX Service from the OS. In Windows go to Control Panel -> Administrative Tools -> Services. Look for TREX Instance XX
2. Check if the system process TREXIndexServer(.exe) runs. In Windows just open the Taskmanager and look for the process.
3. Go to the TREX log folder "\usr\sap\trex_61\trace". Check for errors in the file TrexIndexServer.XXXXX.XXX.trc
Regards,
vijay.

How to access transport logs?

looks like somebody in our company sent confidential information outside,
i've been asked to check email logs to verify if it's been done via email.
any tips/suggestions would be highly appreciated.
thank you.

Hi,
Regarding to the original question, as BadBoyHouse said, the
message tracking log may be an option. However, specify maximum age for the message tracking log files: the default is 30 days. It seems that didn’t meet your requirements.
Meanwhile, did you mean that want to check details of the attachment in the user email? I doubt whether there has such log files on SBS, which can help you to achieve this target.
In addition, would you please let me know whether all emails of this user had been deleted? Or even this user
account had been deleted?
Hope this helps.
Best regards,
Justin Gu

Error opening installation log file.

ProblemYou are unable to install BlackBerry Desktop Manager and the following error message is displayed when you open the installation log file:
Error opening installation log file verify that the specified log file exist and is writable.
ResolutionTo resolve this issue, edit the system environment variables by completing the following steps:
Warning: The following procedure requires modifying the computer environment variables. This can result in unexpected system behavior. Document the existing values prior to implementing any changes. To search for the Install.log file or files in the temp folder:
On the Start menu, click Run and type %temp%.
Click OK.
In the Temp folder, click Search and then All files and folders. In the All or part of the file name field, type Install.log and set the Look in field value to Temp.
Click Search.
If the Install.log file is found, delete it.
In Windows® Explorer, go to the C:\ drive and create a new folder called TEMP2.
Open the Control Panel and double-click the System icon.
On the Advanced tab, click Environment Variables.
In the User variables list, select TEMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the User variables list, select TMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the Environment Variables window, click OK.
In the System Properties window, click Apply and then OK.
Restart the computer for the changes to take effect.
Repeat the installation procedure for BlackBerry Desktop Manager.
I have 8330

hello,
another solution is here :
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Portal Search Not Working - Only Returns Portal Content, Not TREX Indexes

I have configured two indexes using the portal. One is for documents that reside on the portal, and the other one is for a website that we have configured in TREX using Cruiser. The TREX Admin console shows that the website information has been indexed. However, when I search on a word in Portal, only the portal contents are displayed. Is there a different search field for looking up TREX/indexed files? I'm using the search field that's on the front page of the portal. Also, both indexes belong to the same index group. I did use the serach feature built-in to TREX Admin to verify that there were documents stored in the index.

Please check Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/46/5d5040b48a6913e10000000a1550b0/frameset.htm
And Edit Crawler Parameter's field Follow Redirects on Web-Sites to YES

Database verify failed

hi guys,
I have one more query.
I get an error log "database verify failed" during the report execution but my report appears fine. is this an error with the JRC ?
Also when i pass 'NULL' for the outputstream object in the processRequest() i get response already commited error but when i pass the pageContext.out to that method i am not gettin that error. i have set the Isownpage and isownform as true.
Thanks,
Prem

I'd need more info concerning the context within which the database verify error is displayed.
Are you possibly changing the database location in code? This would trigger a database verify step, to ensure the design schema is compatible to the runtime schema.
Since this is intermittent - not every time - I'm wondering if this is load-related.
As for the output stream exception - the viewer works by postback, where it writes HTML output to the response Writer interface, and binaries (export formats) to the response OutputStream interface. The last argument of the processHttpResquest is used to specify the Writer object. If it's null, then it retrieves the getWriter from the HTTPServletResponse argument.
The exception arises because of this - when you pass in null, then it writes to the Writer, and something else on the page is writing to the OutputStream and colliding, since you can't write to both the response.getWriter() and response.getOutputStream() within the same request.
Sincerely,
Ted Ueda

MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
Keith Garner - keithga.wordpress.com

Media Encoder CC will not install with PPCC on Mac OS 10.9

After numerous tries after updating to Mavericks to install Media Encoder CC, it has failed each time. When trying to render projects in Premiere Pro CC a screen pops up that says I am using an old version of Media Encoder and need to update so I go to update and is says I have the most current version. I also have Media Encoder CS6 installed on this Mac which shows up under Applications but MECC does not. So, I have tried about three times to unistall Premiere Pro CC via the CC Cleaner Tool and upon reinstall, MECC still does not show up. Any thoughts?

Moving this discussion to the Adobe Media Encoder forum.
A/V Warrior I would recommend reviewing your installation logs to verify that no installation errors occurred. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. Please feel free to post any specific errors you discover to this discussion.
Also in case it is applicable can you please provide the specifics regarding the computer hardware you are running Premiere Pro CC and the Adobe Media Encoder on? Please see http://www.adobe.com/products/premiere/tech-specs.html for a guide of the hardware specifics which may be applicable. You will also want to verify that you meet or exceed the system requirements.

Why can't I see usernames and/or mahcine names in reports?

We are demoing the 650 web content filter, and really like them for the blocking, but for some reason we aren't seeing the usernames or machine names in reports, only IP addresses of the users machines. Did I set this up wrong? I set it for authentication using ntlmssp, but I dont know if it is working correctly... Can someone help please? Thanks! John Truxton

John,
If the WSA knows the username, it will be logged in the reports. It's possible that you are matching rules that do not require authentication or perhaps the authentication isn't working correctly?
Check the access logs to verify that the usernames are present.
If authentication isn't working or if the names are present in the access logs, it's recommended that you contact support for a deeper analysis of the issue.

TREX logs to verify

Similar Messages

Maybe you are looking for