TREX-Name server error
Dear All,
We have configured TREX 6.1 on our Portal.
The Installation is complete & now we are carrying out the post installation activities.
We are getting the error like -
"The name server is not running or no name server is configured in TREX Service Properties."
Through Visual Administrator the TREX Service entry for name server are completed.
When I stop/start the TREX service the process for TREXNameserver is running. I then go to the Portal & click System Configuration - --TREX Monitoring the above message comes & in the Task Manager when I check the process for TREXNameserver it is not running.
Please suggest asap.
Thanks & Regards,
Sameer
Please check if you have done the below
Procedure
1. On the portal host, edit the configuration file config_local.properties. The information below gives the respective locations of the file:
<SAP_J2EE_Directory>>clusterserverservicesservlet_jspworkjspTempirjrootWEB-INFportalportalappscom.sap.km.applicationlib
2. Insert the following line:
trexserver=<hostname>.<domain>
Example: trexserver=mytrexhost.mydomain.com
3. Restart the servlet engine.
Only EP 6.0: Check the settings in the portal under System Administration → System Configuration → Service Configuration → Applications (Content Catalog) → com.sap.portal.ivs.httpservice → Services → proxy.
If a proxy server is entered there, you have to enter the TREX host in the field http Bypass Proxy Servers.
Also check if you have comfigured the below
http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/14_TREX60SP1_InstallationGuidePortal.pdf
Message was edited by:
Jayesh Ghodge
Message was edited by:
Jayesh Ghodge
Similar Messages
-
Com.sapportals.wcm.WcmException:TREX Name Server Error
Hi,
I have developed a Customised Search Iview using the STD KM Search Iview
But I getting the following error while I input a search criteria and click on the Search Button :
"Error during search occurred - com.sapportals.wcm.WcmException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)"
Please can anyone let me know why is this error been thrown.
Regards,
Vaishali.Hi.
I am having the same error, i already check the monitor and it shows the same error:
Error during search occurred - com.sapportals.wcm.WcmException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217).
There are two machines accessing TRX and one is working fine the other one does not. I made a ping from epweb to trx and does not respond. If i make de ping from epprd to trx it responds fine. What can i do?.
TRX is up and working fine.
Thanks for the help.
Edited by: Juan Pablo Toledo Corredor on Apr 16, 2009 8:13 PM -
How to configure trex name server
hi all
while creating index i am getting the error
Index could not be created; creating index failed: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
for the above error i need to configure the trex name server using TREX Configuration in the J2EE Engine in j2ee visual administrator .
can any one tell me the clear path that where to configure the above and where j2ee visual administrator installed how to configure the name server
awaiting for replies
regards
ganeshHi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks. -
Com.sapportals.wcm.WcmException: TREX Name Server
Hello SAPMAN;
When try search in Portal show this error,
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
In Visual Administrator the trex service is ok.
Regards.Trace error,
[290512] 2010-04-23 12:52:19.643 e TNS TNSClient.cpp(00599) : sendRequest to spcp1appitr01:30301 failed with NetException. data=[getvalue](S)client_id=spcp1appitr01:0/291980/1920...
[290512] 2010-04-23 12:52:19.643 e TNS TNSClient.cpp(00497) : nameserver spcp1appitr01:30301 not responding after 1 retries. giving up.
[290512] 2010-04-23 12:52:19.643 e TrexNet EndPoint.cpp(00087) : ERROR: failed to create Endpoint 10.130.14.15:0 reason: invalid port
[290512] 2010-04-23 12:52:19.643 e AlertServer TRexAlertMonitor.cpp(00598) : An exception occured while getting configuration from the active master (name) alert server!
[291500] 2010-04-23 12:53:10.174 e NameServer TREXNameServer.cpp(00542) : shared memory not initialized after 10 retries (state=Reinit). disabling shared memory
[291500] 2010-04-23 12:53:11.143 e TrexNet EndPoint.cpp(00243) : ERROR: failed to open channel 10.130.14.15:30301! reason: connection refused
[291500] 2010-04-23 12:53:11.143 e TNS TNSClient.cpp(00599) : sendRequest to spcp1appitr01:30301 failed with NetException. data=[getvalue](S)client_id=spcp1appitr01:0/292784/1920...
[291500] 2010-04-23 12:53:11.143 e TNS TNSClient.cpp(00497) : nameserver spcp1appitr01:30301 not responding after 1 retries. giving up.
[291500] 2010-04-23 12:53:11.143 e TrexNet EndPoint.cpp(00087) : ERROR: failed to create Endpoint 10.130.14.15:0 reason: invalid port
[291500] 2010-04-23 12:53:11.143 e AlertServer TRexAlertMonitor.cpp(00598) : An exception occured while getting configuration from the active master (name) alert server!
Regards. -
TREX Name Server (Errorcode 7217)
Hi,
I have the EP 7.0.
When I try to use the search tool (TREX), to find some file, I recieve de folow message:
class com.sapportals.trex.TrexException
TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
Details:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
at com.sapportals.trex.tns.TNSClient.sendRequest(TNSClient.java:537)
at com.sapportals.trex.tns.TNSClient.getActiveHttpServers(TNSClient.java:349)
at com.sapportals.trex.tns.TNSClient.getHttpServer(TNSClient.java:208)
at com.sapportals.trex.core.util.HttpRequest.getServerUrl(HttpRequest.java:604)
at com.sapportals.trex.core.util.HttpRequest.run_it(HttpRequest.java:233)
at com.sapportals.trex.core.util.HttpRequest.run(HttpRequest.java:111)
at com.sapportals.trex.core.util.HttpRequest.run(HttpRequest.java:95)
at com.sapportals.trex.core.admin.HttpAdmin.showIndex(HttpAdmin.java:536)
at com.sapportals.trex.core.admin.AdminManager.showIndex(AdminManager.java:650)
at
What I have to do to resolve this problem?<b>I looked the files and I found some messages like this:</b>
[4112] 2006-12-01 10:02:43.625 e TNS_Timing WatchDog.cpp(00162) : info LocalWatchDog: detected unknown->inactive httpserver@http://portalapprod:30205/TREXHttpServer/TrexIsapiExt.dll
[2264] 2006-12-01 13:00:06.140 e TNS_Timing WatchDog.cpp(00157) : info LocalWatchDog: detected active httpserver@http://portalapprod:30205/TREXHttpServer/TrexIsapiExt.dll
[2452] 2006-12-01 13:11:16.375 e TNS_Timing WatchDog.cpp(00157) : info LocalWatchDog: detected active httpserver@http://portalapprod:30205/TREXHttpServer/TrexIsapiExt.dll
[2452] 2006-12-01 13:11:16.390 e TNS_Timing WatchDog.cpp(00157) : info LocalWatchDog: detected active preprocessor@portalapprod:30202
[2452] 2006-12-01 13:11:16.390 e TNS_Timing WatchDog.cpp(00157) : info LocalWatchDog: detected active indexserver@portalapprod:30203
[2452] 2006-12-01 13:11:16.390 e TNS_Timing WatchDog.cpp(00157) : info LocalWatchDog: detected active queueserver@portalapprod:30204
[2452] 2006-12-01 16:30:38.831 e TrexNet EndPoint.cpp(00210) : ERROR: failed to open channel 192.168.151.11:30202! reason: connection refused
[2452] 2006-12-01 16:30:38.831 e NameServer TREXNameServer.cpp(00712) : pingTREXService(preprocessor@portalapprod:30202) net exception while connectingOpenChannelException at EndPoint.cpp(00211):
message: an error occured while opening the channel
info: connection refused
param: 192.168.151.11:30202
[2452] 2006-12-01 16:30:39.917 e TrexNet EndPoint.cpp(00210) : ERROR: failed to open channel 192.168.151.11:30203! reason: connection refused
[2452] 2006-12-01 16:30:39.917 e NameServer TREXNameServer.cpp(00712) : pingTREXService(indexserver@portalapprod:30203) net exception while connectingOpenChannelException at EndPoint.cpp(00211):
message: an error occured while opening the channel
I<b> tried to start the TREXadmin.bat but it didn't work and show the message "Shared Memory Not Initialized. Retry in 5 second..."</b>
Do you have any another idea? -
How To Configure TREX Name Server&Port for UDDI Service Registry Settings
Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
ThomasHi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks. -
Unknown User Name(Server) error
Got the following error message in Fabric Manager "Unknown User Name(Server)". Any clues to what it might mean?
Cheers.It means 1 of 2 things. That there was a timeout before FM could discover that switch or that username/password is not correct for that switch. If this is local authentication, then reset the password for the snmp user you are using to login to this switch. Is this one of many switches and the other ones are accessible?
-
Hello,
I am running EP6 SP2 Patch29. When I click on System Admin - System Configuration - Knowledge Management - Index Administration and the TREX Monitor. I get a message that <b>Name Server Disabled</b>. The other serivces listed are connected.
I went to the TREX Server and I can open a telnet connect on that server on port 8355, which is what is configured as the Name Server port.
Any ideas why I get Name Server Disabled when I looked at the TREX Monitor?
Thanks,
KeithHi Keith,
Check the parameters(Name Server parameters .. if anything is disabled, change it) of TREX Service in Visual Administrator and check the parameters in topology.ini file.
Hope this will solve your problem.
Regards,
Srinivas GV. -
Configuring TREX name server using j2ee visual administrator
hi all
i found the go.bat file in the following path in my system
/usr/sap/EEP/JC00/j2ee/admin/go.bat
now i want to run that "go.bat" but i don't know how to run this in linux machine but my portal server is installed in linux machine.so, can any one help me how to run that file in order to configure name server .
and also can any one tell me how to find out the server name and port number in order to fill the following format in name sererver
tcpip://<%nameserver%>:portnumber
plzz help me out
Thks&Rgds
GnanaHi,
/thread/77197 [original link is broken]
Regards
Prakash -
C:\>sqlplus scott/tiger@namestest
SQL*Plus: Release 8.1.7.0.0 - Production on Fri Jun 14 14:16:13 2002
(c) Copyright 2000 Oracle Corporation. All rights reserved.
ERROR:
ORA-12637: Packet receive failed
what can I do for this error.Ok let me back up. When I go to run the report in Crystal against an Oracle Server connection - I get a popup that gives me 3 fields - Service, User ID, and Password.
Where does Service go? What property do I set to connect to my oracle database? Server? Servername?
Because I'm setting all 3 here (PreQEServerName, Server, ServerName) to the service and its giving me the 'Error finding JNDI Name'. Am I missing a property - should I be referring to a 'Service' property?
private static void switch_tables(DatabaseController databaseController) throws ReportSDKException
final String SERVICE = "mydb.world";
final String USERID = "myusername";
final String PASSWORD = "mypassword";
//Obtain collection of tables from this database controller.
Tables tables = databaseController.getDatabase().getTables();
//Set the datasource for all main report tables.
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
//Change connection information properties.
IConnectionInfo connectionInfo = table.getConnectionInfo();
PropertyBag connInfoProperties = new PropertyBag();
connInfoProperties.putBooleanValue("Trusted_Connection", false);
connInfoProperties.put("PreQEServerName", SERVICE);
connInfoProperties.put("Server Type", "Oracle Server");
connInfoProperties.put("Database DLL", "crdb_oracle.dll");
connInfoProperties.put("ServerName", SERVICE);
connInfoProperties.put("Server", SERVICE);
connectionInfo.setAttributes(connInfoProperties);
//Set database username and password.
if (USERID != null) {
connectionInfo.setUserName(USERID);
connectionInfo.setPassword(PASSWORD);
connectionInfo.setKind(ConnectionInfoKind.SQL);
table.setConnectionInfo(connectionInfo);
//Update old table in the report with the new table.
//ERROR comes from this line: 'Error finding JNDI name (mydb.world)'
databaseController.setTableLocation(table, tables.getTable(i));
}/switch_tables/
Edited by: kisetta on Oct 6, 2010 8:01 PM -
Trex: Unable to find name server
We are in process of upgrading our portals from EP6sp2 to EP6SP9 and we have trex 6.0 server. Recently we have upgraded our dev portal to EP6SP9 and trying to configure trex fails. I have specified name server in J2EE engine but still I cant create indexes. I restarted the system but still no good.
when I see trex monitor I get message "The name
server is not running or no name server is configured in TREX Service Properties. Start J2EE Admin to change the
properties."
When I try to create the index "Index could not be
created; creating index failed: TREX Name Server
(including back-up servers) is down or not accessable.
(Errorcode 7217)"
How do I make my trex work. What am i missing
thanks,
PraveenHi,
The server is working and aswell my production server which is EP6SP2 is configured to the same trex server and I can search documents in Production server.
Just wondering whether do I have to install Trex 6.1 for EP2SP9. I have given the name server as tcpip//<hostname>:8355. ? Any other Suggestion?
Thanks,
Praveen -
Configuring name server in j2ee visual admin
hi all
i found the go.bat file in the following path in my system
/usr/sap/EEP/JC00/j2ee/admin/go.bat
now i want to run that "go.bat" but i don't know how to run this in linux machine but my portal server is installed in linux machine.so, can any one help me how to run that file in order to configure name server .
and also can any one tell me how to find out the server name and port number in order to fill the following format in name sererver
tcpip://<%nameserver%>:portnumber
plzz help me out
Thks&Rgds
Gnanahi dominlik
yeah go file is there but while running the following was displayed
[root@entegdt26 admin]# ls
adminCFG.properties go go.jar lib logviewer-standalone
cfg go.bat launcher log
[root@entegdt26 admin]# sh go
go: line 7: /usr/java/bin/java: No such file or directory
[root@entegdt26 admin]#
can u tell me how to mark it as executable using chmod coz i am not aware of linux
its very very urgent help out only one day i've time with in this i've to configure trex name server and create index in ep
awaiting for reply
Regards
gnana -
During Install of Solaris 9. I attempted to config DNS.
But the System comes back with Name Server error. What am I during wrong?If your nameserver is not on the same subnet as your Solaris host, it won't be able to route to it; select "none," then edit /etc/nsswitch.conf and /etc/resolv.conf after your install is done.
-
TREX - Search Failure - HTTP Server error: 503 - Queue Server down
Hello,
I've got a problem with TREX, the following tasks results in erros:
Default Search
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Creating Index
Error 503
- On Index Administration: indexes status are green
- On TREX Monitor: Takes long time to loa. HTTP Server and Name Server are green. There is no entry for Queue Server
- On TREX Monitor > Display Queues: Takes a long time and then no queues are displayed
- On Portal Monitor > Request Overview: Requests for TREX takes pretty long time
Starting Time: 9:16:23 AM
Starting Date: May 19, 2010
Request Name: NW:J2E:SRV:HTTP
User ID: <my user>
Outbound Data: n/a
Duration: 395671
CPU Time: 5812
Component Entries: 26
Component with Largest Net Time: EP:KM:TREX:HTTP:<host>:30205
Largest Net Time: 38867
Component with Largest Net CPU Time: EP:PRT_render:.../com.sap.km.TrexMonitor
Net CPU Time: 5674
Could you help me with procedures or guides on how to solve the problem and start the queue server?
kind regards,
RafaelBASIS team reseted TREX and it's working again
-
Trex Index could not be created HTTP server error: 503 (Errorcode 7266)
Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharathhi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath
Maybe you are looking for
-
Thinkvantage Access Stopped working
Thinkvantage Access connections main service stopped working this happenedafter devicedriver package, Install Microsoft network protocol happened automatically now i have no inter net connection, please can tell how to resolve this issue
-
Decimal space problem in Condition value of Import PO
Dear All, In PO the condition value found to be 0.00. When the problem explored,we find only 2 decimal places appears for the value. If the value is 0.0021,it appears as 0.00 only due to decimal space given in KOMV(structure) against KWERT field is 2
-
How to import an assignment block into a word document
hi all, how to import an assignment block into a word document ,actually we an option called import to Excel, but i don't know make it for Word document..... Regards Sunil Kumar SA
-
MySQL links in Solaris 11.2 have gone from /usr/mysql/bin
I see that Solaris 11.2 now comes with MySQL 5.5 but I notice that the symbolic links (/usr/mysql/bin, etc) have been removed from all the packages. # Solaris 11.1 # ls -l /usr/mysql/ total 9 drwxr-xr-x 8 root bin 8 Feb 15 2012 5.1
-
Update field ref_doc_ca in vbap
Hi all, I want to change the value of the Document category of preceding SD document. But it does not work... order_headerx-updateflag = 'U'. CLEAR: order_item, order_itemx. REFRESH: order_item, order_itemx. order_item-