TREX no more included in the SneakPreview??

Dear SDN,
we need to test TERX in order to understand how to use it inside an EP WebDynpro project.
We dowloaded the NW 7.0 Java Trial SneakPreview because according to the installation packages content list/desription the TREX should be included.
Unfortunately we didn't find any evidence of TREX into the Sneak Preview installation kit.
The TREX is no longer available with Sneak Preview?
Is there another place to download TREX for testing purpose?
Please help!!
Thanks
Enrico

I met the same problem. I am using the Netweaver SP14 java trial.

Similar Messages

If I buy a $1.29 song or a $14.99 album here in California, is tax already included in the pricing or will I be charged more after the purchase?

If I buy a $1.29 song or a $14.99 album here in California, is tax already included in the pricing or will I be charged more after the purchase?

You need to add on your state's sales tax to the listed price - so you will be charged more that the $1.29 and $14.99

Error on Production Orders Add-on when 2 or more users at the same time.

Hi.
Our add-on creates special production orders (SAPbobsCOM.BoProductionOrderTypeEnum.bopotSpecial) with no problem when used by one user, but if there are two or more users everyone on his own SAPBO session it starts to throw different errors, we think it may be a concurrence problem due to several transactions.
Here a short brief of the code sample and the process:
(error handling and object members not included in the sample)
oDoc.ProductionOrderType = SAPbobsCOM.BoProductionOrderTypeEnum.bopotSpecial
If the oDoc.Add() is correct, We get the last production order created and release it:
Me.sKey = Me.Company.GetNewObjectKey
oDoc = Me.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oProductionOrders)
oDoc.GetByKey(Me.sKey)
oDoc.ProductionOrderStatus = SAPbobsCOM.BoProductionOrderStatusEnum.boposReleased
oDoc.Update()
Then we go for an inventory Entry:
oDoc = Me.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
oDoc.DocDate = Date.Now
oDoc.Lines.BaseEntry = Me.sKey
oDoc.Add
And Finally to close the production order:
oDoc.ProductionOrderStatus = SAPbobsCOM.BoProductionOrderStatusEnum.boposClosed
oDoc.Update()
This works fine when only one user is using the add-on, but in the end there wil be at least eight users simultaneously working with this add-on
The test:
We have four users creating production orders with the add-on.
Two of them get the usual success messages and the created documents in SAPBO are all correct.
The other two users get diferrent errors messages during the process.
If they wait and try again to run the process it works fine.
Repeating the test get errors on different users depending on which one started the process first.
Our client needs to generate beetwen 900 and 1200 production orders per day, so they can't wait until the process is free for each user to work with it.
The common erros detected are:
Changing the status of the production order:
-5002 - The warehouse is not defined for the item.
-4002 - To generate this document,
first define the numbering series in the Administration module
-1029 - Field cannot be updated
Adding the production order and inventory entry:
-2038
-1116
-5002
Regards,
Omar Fonseca

The start transaction model didn't Fit well with all the process we are doing, but the idea of locking or holding the other users seems to work pretty fine, we are now using a flag to determine if someone is doing the process and put in hold the new ones.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Using Acrobat X and creating a PDF File from EXCEL 2010, I notice that the Pagination restarts at 1 for each Worksheet included in the PDF.

I use Acrobat X Standard and created a PDF file from two or more worksheets using EXCEL 2010.
The resulting PDF file restarts the PAGE # (In header/footer settings of Excel) at 1 for each worksheet.
However, a colleague of mine who has Acrobat X Pro version, using EXCEL 2010 and same exact file does the same task, he gets a file that starts at page 1 and second worksheet continues the page # from the last page of the First worksheet.
We both are using the ACROBAT menu (not the print to Adobe printer) to create the file so that we can get Bookmarks included in the resulting file for each worksheet.
We cannot figure out any option in Acrobat's preferences that controls the pagination on either of these versions of Acrobat.
So is this just a feature that works one way in Standard version and another way in the Pro version, and the user has no control over it?

This is so sad. I read your comments and I said, "Huh?" Haha!
I tried the indexed color option and it did make the final file smaller. Around 600KB. But there's probably another way to make it even smaller like the gazillion-paged pdf file that I mentioned that was only about 300KB.
And by saying a layout program, does that mean like Adobe InDesign? Does that mean that I should just make my graphics in Photoshop and then import using another program and finish the file there?
What other layout programs can I use?
Thank you so much!

Where Can I Find Components And Footprints Not Included In The Circuit Design Suite Databases?

One of the most common questions asked by users of the Multisim and Ultiboard suite is about finding components. From time to time you may come across the need of a particular component or footprint (lanbdpattern) that is not included in the master databases. So where can you look for these components? There are multiple places to begin your search, both 3rd party and from NI that are free and readily accessible:
One of the long-standing free resources is the Kittmaster's Component Database which is maintained by Kittmaster (Chris) one of our proven active veterans of this board as well as a Beta Tester of the Circuit Design Suite. You will find a vast collection of already built parts in Multisim and Ultiboard formats that have been submitted by users like you that have register on kittmaster's database and that actively upload custom component creations. I encourage you to register and share.
NI has recently created the Circuit Design Community in response to requests from users around the world. The Circuit Design Community aims to provide an open resource for designers that need or would like to share Multisim components, Ultiboard footprints, sample design files and other documents that are of use for the design community. The basic difference between the Circuit Design Community and this Circuit Design Discussion Forum is that the Community is tailored for document and file sharing, whereas the Forum is designed with problem solving, tip sharing and general support questions in mind. Again, I encourage you not only to search, but also to share any components you may have created that are useful for other designers.
Most manufacturers that offer SPICE or PSPICE models in their websites would typically allow you to download them free of charge, in most cases accepting a license agreement. The first step is to identify who the manufacture of the part you are looking for is, as well as cross-reference manufacturers. Then search in their corresponding websites for the product folder or design resources section. If you find SPICE or PSPICE models you can easily import those when creating a new component, remember that Multisim is highly compatible with PSPICE models, and every new release adds more compatibility. If you cannot find the model, it does not hurts to call or email the manufacture and ask directly if they have such models, in many cases they are not advertised in the web.
Last, but not least, use your favourite internet search engine and see if anyone out there has posted or worked on a similar model.
Thank you for using the support resources and I hope that these options fulfill most of the component searches that you may need to do.
Message Edited by nestor on 04-14-2009 02:52 PM
Nestor
National Instruments

You can have a look at some established projects that are using similar tools - where do they put the application files etc.
There are things like XDG_CONFIG_HOME, XDG_DATA_HOME etc. http://standards.freedesktop.org/basedi … atest.html

How do you know what type of file is included in the 'Other' section?

This is in regards to the capacity section in the summary tab of my ipod info. I have reached full capacity and cannot add any more songs to my ipod so would like to delete any unnecessary files. I have deleted all photos, most movies and TV shows. Only have a few movies and music videos in the Movies section.
Is there any way of finding out which files are included in the orange 'Other' section? Help!

My son is having this same problem. He only has 64 songs on his iPod Touch so far, but the "other" space has almost filled the iPod. He has no photos, other than the usual album artwork, no videos, notes, contacts, etc. and has erased all podcasts. We don't see "enable disk use" on the Summary page when he connects the iPod to iTunes. So we don't know if disk use has been enabled or not. I also can't find it in the Help topics. Where do we locate the disk option to see if it's turned on? He doesn't want to Restore as he will lose the upgrade and have to purchase it again. He uses a PC, if that makes a difference.
Thanks for any insight.

Reports included in the page keep looping without retrieving any results

We are facing an issue related to the behaviour of Siebel Analytics when more than 1 answer are included in a dashboard page. When a report is generated, the other reports included in the page keep looping without retrieving any results, but if I manually click on 'cancel' link, the reports successfully appear with consistent data. This behaviour is not stable since sometimes the page works fine, sometimes not, but it's not clear what it depends on. Can anybody please let me know if this behaviour is a known bug.

Hi Deb,
Could you please explain me in more detail?
The problem is we are able to see the old reports that we were already moved into Q environment. The newly moved 5 reports are giving this error message.
Please help
Thanks
Sri

Why it is popular applications are not included in the official repo?

Why it is very popular applications like yaourt (GPL), pacman-color (GPL) and many other free programs are not included in the official repositories?
Why not create an official "non-free" repository for popular non-free software?

There will never be an AUR helper in the official repositories because it runs counter to the AUR policy - which is: it's unsupported, so we're not facilitating its use. You need to be aware about the potential drawbacks of its usage, which involves getting you, the user, to make that call to install an AUR helper - which involves more than just calling pacman. Can't comment on pacman-colour, but apart from colour, it doesn't really add any functionality afaik .

How to include all the child OU groups of a master OU group in LDAP authentication

Dear All,
I am using Apex 4.2 on windows server 2012 on internet explorer with database 11g R2 all 64 bit.
we are using Microsoft Active Directory Authentication in our domain.
I have created two protals, Staff Portal and Student Portal
I have two groups, Staff and Students. these two groups coming under HCT group.
I want to configure LDAP authentication for these groups, so that student cannot login to staff portal and vice versa.
I had created on authentication schema in apex.
inititally I configured as below
for example I have a group ETC, inside ETC I have CSS in active directory,
DN String=cn=%LDAP_USER%,dc=hct,dc=org
Use Exact distinguish name=YES
LDAP Username edit function=
return apex_escape.ldap_dn (
p_string => :USERNAME,
p_escape_non_ascii => false ) || ',ou=users,ou=css,ou=etc,ou=staff,ou=hct' ;
Username Escaping=NO ESCAPING
and it is working,
now I have another group under ETC, which is ESS. how to include ESS also? I mean how to include all the child groups of a master group?
because I will then only include the STAFF ou and the rest of the ou which coming under staff will come automatically.
please refer to this thread for more details.
Re: Re: Different LDAP authentication for Student and Staff Active directory groups
Thank you.

Powershell (or vbscript if you want to be old school).
You can trigger a powershell script which will remove the offending user(s) easily enough with out resorting to a TOLDAP pass. Nearly any script type thing would work but powershell is preferred. It can be triggered separately from the TO AD stuff and will take multiple objects to run in one pass if you can construct the command line (or create a text file and feed it in).
Otherwise, TOLDAP is the way to write to AD...
Peter

CSV File Doesn't Get Included In The Package

Hello friends,
We have problem with packaging the indesign document.
we are opening have data merge CSV files which show in the links pallet.
when we run the package command the .csv file doesn’t get included in the package
so if there are any extra settings that copies .csv files in the current package please help me.
Regard
Tahir

Hi
And how about this technet article
http://technet.microsoft.com/en-us/library/ff980461(v=exchg.141).aspx
To avoid this error in the future, follow one or more of these steps:
Do not manually modify message tracking log files. By default, these files are located in the following directory: C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\MessageTracking.
Make sure that your file-based antivirus software is configured to exclude file directories that contain message tracking log files. For more information about configuring your file-based antivirus software on an Exchange server, see
File-Level Antivirus Scanning on Exchange 2010.
Review the System log for disk-drive-related events. Use the information in those events to determine whether the disk that stored the log files has any hardware failures. You may have to use
CHKDSK tool to check a disk and display a status report. For more information about
CHKDSK, type CHKDSK /? at a command prompt.
Cheers
Zi Feng
TechNet Community Support

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

Does anyone have more information on the virus disguised as adobe flashplayer

Does anyone have more information on the virus disguised as adobe flashplayer that was released last Thursday 5 Apr 12. Can you simply use time machine to reload the entire system from backup to make sure you don't have the virus.

On ninemsn TECH news: It's called flashback trojan
The computer security industry buzzed Thursday with warnings that more than a half-million Macintosh computers may have been infected with a virus targeting Apple machines.
Flashback Trojan malware tailored to slip past "Mac" defenses is a variation on viruses typically aimed at personal computers (PCs) powered by Microsoft's Windows operating systems.
The infections, spotted "in the wild" by Finland-based computer security firm F-Secure and then quantified by Russian anti-virus program vendor Dr. Web, come as hackers increasingly take aim at Apple computers.
"All the stuff the bad guys have learned for doing attacks in the PC world is now starting to transition to the Mac world," McAfee Labs director of threat intelligence Dave Marcus told AFP.
"Mac has said for a long time that they are not vulnerable to PC malware, which is true; they are vulnerable to Mac malware."
Dr. Web determined that more than 600,000 Mac computers may be infected with Flashback, which is designed to let hackers steal potentially valuable information such as passwords or financial account numbers.
Hackers trick Mac users into downloading the virus by disguising it as an update to Adobe Flash video viewing software.
Apple has long boasted that Windows machines are more prone to hacking than Macs.
Computer security specialists contend that the reason for the disparity was that since most of the world's computers were powered by Windows, hackers focused on systems that promised the most prey.
As the popularity of Macs has soared, so has the allure of hacking Apple operating systems, according to Marcus.
"There has been a significant increase in Mac malware in the last several quarters, so what we've seen with the Flashback Trojan isn't particularly surprising," Marcus said.
"Cybercriminals will attack any operating system with valuable information, and as the popularity of Macs increase, so will attacks on the Mac platform."
Computer users, no matter their operating systems of choice, need to protect machines with tactics including up-to-date anti-virus programs and avoiding risky habits such as opening files or clicking links from unknown sources.

TREX no more included in the SneakPreview??

Similar Messages

Maybe you are looking for