TREX search engine error

Hi,
I am new to KM.I installed TREX server in separate Host.I am accessing the TREX server into our portal.I created the Web Respository and craeted Crawler and Index.When i check the TREX monitor and Crawler monitor everything running fine.But when i am Searching the content throough search engine i am getting the following error.
Search Failure
com.sapportals.wcm.WcmException: Index does not exist; indexId = "test_index" (Errorcode 7)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.

Can anyone suggest me where exactly i am getting the problem and need solution.
Regards
Usman

Hi Usman,
you probably deleted an index on TREX site, without deleteing the index in KM Index Administration.
This is simply not supported, because KM has no chance to register it.
You have to choices:
Either 'Reindex' this index in the index administration.
The other option is to delete it.
Regards Matthias Röbig-Landau

Similar Messages

Use of KM services and TREX Search Engine From share point portal

Hi All,
We would like to Use of KM services and TREX Search Engine From share point portal.
For this purpose we interoperability between windows sharepoint and SAP Portal.
Please provide necessary documents or suggestions for interoperability for above requirement.
mail id : [email protected]
Thanks in advance
Regards
Swarna B

Hi,
See this this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b
Regards,
Senthil K.

Sending query to third party portal from TREX Search Engine

HI Experts,
we need to implement normal search option in SAP portal.
when we search any thing from portal ,
It has to search in EP & KM and also it has to search
windows sharepoint portal and bring the data back to SAP Portal.
For this purpose one solution is
1) implementing enterpise search,
but my client dont want to go for enterprise search(federated search).
2) The other way
Sending query to third party portal from TREX Search Engine
In this way what i want is ,
how TREX can send query to third party portal SEARCH ENGINE
(in my case share point portal search ENGINE).
There is no problem to search in EP & KM becuse it is default.
To search in Micro soft Share point portal,
TREX should pass the query to share point portal search ENGINE.
Is there any API TO send a query to third party portal like sharepoint?
I searched in SDN and Other sites also but i am not getting exactly what I require.
If any one has ideas or implemented already please guide me.
My client require searching option like this,
we need to provide drop down box in SAP Portal with 3 options like
1) search in Share point portal
2) search in SAP EP & KM
3) Search in both the portals
please provide any code samples in case if you have.
please help me , its urgent
Thanks in advance.
Regards
Bala

Hi Bala,
please check the information on the KM IMS (Index Management Service) in KMC's developer guide. A connection to a 3rd party search is done from KM, then calling TREX and XY in parallel, not serially from TREX.
Here's a paper describing this for an older KM release:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5e514b57-0701-0010-3796-deb3636835fa
Regards, Karsten

TREX - Search Talent Management

Hi All,
I know that there are many threads on the TREX and have looked at all of them and tried some of the things but i still get the error search not available.
We have created all search connector in the admin cockpit and have indexed all of them with no errors. All 32 of them are active. I then ran report ESH_TEST_SEARCH to test the searches. All of the objects templates return results except the following:
HRTMC_AES_DOCUMENTS
HRTMC_AES_ELEMENTS
HRTMC_AES_TEMPLATES
HRTMC_AUTHORITY_VIEW
HRTMC_CENTRALPERSON
HRTMC_FUNC_AREA
HRTMC_JOB
HRTMC_JOB_FAMILY
HRTMC_ORG_UNIT
HRTMC_POSITION
HRTMC_QUALIFICATION
HRTMC_REL_CP_JF_744
HRTMC_REL_CP_Q_032
HRTMC_TALENT_GROUP
For most of these templates I get the following error:
Search Engine Error 29 for DHR310HRTMC_FUNC_AREA : attribute not defined for physical index;index esh:dhr310dhr310hrtmc_func_area~functional_areayy has no attribute 'objid'.
For the HRTMC_AUTHORITY_VIEW i get no results, it comes back no values and has a yellow traffic light in the Log viewer. In the Job Log in the Admin Cockpit i see the following
31.05.2011 21:54:23 Object connector DHR310HRTMC_AUTHORITY_VIEW: New status: Indexing
31.05.2011 21:54:23 The implementing class does not support the iterator by time interface
31.05.2011 21:54:23 Implementation did not provide any data -> exit indexing
31.05.2011 21:54:23 Object connector DHR310HRTMC_AUTHORITY_VIEW: New status: Active
31.05.2011 21:54:23 Job finished
I also activated BADI HRTMC_AUTHORITY_VIEW_DELTA in the IMG and ran report RPTMC_CREATE_CHANGEPOINT_AUTH. I then scheduled ESH_IX_PROCESS_CHANGE_POINTERS for the HRTMC_AUTHORITY_VIEW, hoping the I would be returned with some results.howver
I do have a TMS linked to several org units via relation 741 and this is returned in the test search HRTMC_REL_S_O_RESP. In addition if I go to a Talent Review Meeting in the portal and click on 'ADD' to select an org unit, the managers of the Org Units that I am related to appear on the list. However as soon as I select any of them, they are added to the participant list but non of the nominated talents appear, i get the following message:
'No nominations are displayed since the search is not available'
for all other searches i get the error 'Search is not available' or 'No Relevant Records Were Found for This Search'
I Also checked SLG1 logs after attempting the searches and got the following errors:
2007 for DHR310HRTMC_CENTRALPERSON : NameServer error: no servers found; IndexId:esh:dhr310dhr310hrtmc_centralperson~~sap_talent
Exception occurred in program CL_ESH_IF_SEARCH_RESPONSE=====CP, include CL_ESH_IF_SEARCH_RESPONSE=====CM006, row 4
An exception has occurred
29 for DHR310HRTMC_CENTRALPERSON : attribute not defined for physical index;index esh:dhr310dhr310hrtmc_centralperson~personal_datayy has no attribute 'objid'
Exception occurred in program CL_ESH_IF_SEARCH_RESPONSE=====CP, include CL_ESH_IF_SEARCH_RESPONSE=====CM006, row 4
I also tried creating my own serch request using one of the search templates returning results. In this case i used the HRTMC_REL_CP_TB_743 templates with talent group ID as search field and assigned it to one of the search configurations. I then however got the following error.
The following error text was processed in the system DHR : The ASSERT condition was violated. The error occurred on the application server sivrs106_DHR_00 and in the work process 0 . The termination type was: RABAX_STATE The ABAP call stack was:
Method: GET_AUTHORIZATION_QUERY of program CL_ESH_IF_SEARCH_REQUEST======CP
Method: SEARCH_ONE_CONNECTOR of program CL_ESH_IF_SEARCH_REQUEST======CP
Method: SEARCH of program CL_ESH_IF_SEARCH_REQUEST======CP
Method: CONSTRUCTOR of program CL_HRTMC_SEARCH_REQUEST=======CP
Method: GET_INSTANCE of program CL_HRTMC_SEARCH_REQUEST=======CP
Method: TRIGGER_SIMPLE_SEARCH of program CL_HRTMC_AC_SEARCH============CP
Method: ONACTIONSTART_SEARCH of program /1BCWDY/JUNQ9FJYULV16JASJHWU==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/JUNQ9FJYULV16JASJHWU==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================
Anyone have any ideas on how i can resolve this.
Apologies for posting such a long thread, just trying to provide full picture.
Regards
Imraan

Hi Imraan,
You should be congratulated on a thorough post! What version and revision of TREX are you using? You should use TREX 7.1 revision 16 or higher. You should also review the PA-TM SAP notes for TREX. I would recommend reviewing some of the following (some you might need to come back to later):
u2022     1376055 - ESH_ADM_INDEX_ALL_SC: Exception in step 2: Create
u2022     1384953 - ESH: Error message 'A connection already exists' in cockpit
u2022     1437946 - TMC search: Frequently asked questions
u2022     1441190 - Error in model assignments to logical system
u2022     1457940 - Transporting software components: Error in after-import
u2022     1476894 - Transporting software components: Paths are lost
u2022     1483890 - Importing software components directly to target client
u2022     1492752 - Program to create a join index retroactively
u2022     1502296 - Too few ESH_OM_LOGSYSA entries after creating a connector
u2022     1538688 - Indexing Log: Warning "Object 'nw_esh_tst_auto' not ..."
u2022     1516237 - TMC search: Long runtime for indexing of HRTMC_REL_S_Q_031
u2022     1518396 - Indexes are not filled after TREX conversion
u2022     1520538 - TMC search: Performance for extraction of documents
u2022     1523648 - The search does not find any hits
u2022     1526710 - TMC search: Error during position switch by TMS
u2022     1529878 - Performance of authorization indexing
u2022     1534172 - TREX 7.10: Revision 42
u2022     1536663 - TMC search: Long runtime during indexing HRTMC_REL_SC_JF_FN
u2022     1536656 - Missing search attr for person search in Succession Planning
u2022     1540869 - TMC search authorization indexing with initial user ID
u2022     1541984 - Search connectors are not found
u2022     1542741 - Deleting connections
u2022     1550964 - TMC srch: Qualification srch criteria for CP-Q relationship
u2022     1551029 - TMC: Incorrect authorization check for PA infotypes
u2022     1554061 - TMC search: Error in search fields for job evaluation
u2022     1555950 - Indexing of HRTMC_AUTHORITY_VIEW: Data packages are too big
u2022     1558355 - TMC search: Empls. that have left company in search result
u2022     1560966 - TMC search: Error message when copying search configurations
u2022     1561070 - Termination when saving after deleting system assignments
u2022     1562742 - TMS / Search: Indexing fails with HRTMC_REL_S_MANAGER
u2022     1568563 - TMC search: Error when setting up authorization index
u2022     1567065 - TMC search: Simplifying the authorization indexing
u2022     1575454 - TMC search: Performance during CP indexing
u2022     1584309 - TMC search: Change pointer for newly created org. units
Also, did you follow these steps once TREX was connected?
[/people/luke.marson/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management]
Best regards,
Luke

Exposing TREX Search Results to Google?

Hi,
We have a CRM 4.0 E-Commerce solution and want to take the TREX search engine results (indexes?) and make them available to Google/Altavista/msn/etc index externally.
The idea being a search on the web would hit an entry in our online shop and direct the user to the product when clicked on.
I see that there is a Google Connector but this looks to me to be including Google in TREX rather than the other way around.
Is this possible and if so how ?
Regards
Richard

Hi Richard,
I think, you will mostly have to discuss this with Google. Just like TREX has ways to assume other engines results as TREX' own, Google may have these ways. But integration will mostly have to come "top down" from Google in that case.
And it might be easier to find a way to make your pages (it's a catalog, I assume?) accessible to the Google Crawlers, rather than trying to handover the index.
Regards, Karsten

Error message trying to install new search engines

I am running Firefox 19.0.2 installed yesterday on a new desktop PC at the office. (Old PC failed to boot on Monday.) I have completed most of my customization without difficulty. However, when I try to install new search engines, it doesn't seem to matter which one, I get a pop-up error message:
"Sorry, you need a Mozilla-based browser (such as Firefox) to install a search plug-in."
I had no problems installing new search engines under Firefox 16 3rd quarter of last year when I started this job. Why am I unable to install search engines in FF 19?

Hello lafritz65, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
thank you

Whenever I use a search engine, I keep getting the error message "The connection was reset while the page was loading".

I am able to access the internet, but none of the search engines like Google, Yahoo or Bing will work. the page will not load. I get the error message:
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Why does the message '500 internal server error' appear when I use any search engine?

I am able to type a web address and use the internet successfully but when using ANY search engine I get the '500 internal server error' message. This appears if I type in a word to search '''bold text'''and the result is the error message. I have recently uninstalled rapport and hitman pro. Please help.

Did you check your security software (firewall)?
Which security software (firewall) do you have?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
See:
* [[Server not found]]
* [[Firewalls]]

TREX search error

We are getting an intermittent problem when we do a search from our KM iview. When we put in a search string it for the most part comes back with the appropriate data, but every once in a while we get the following error either as an informational text at the top of the iview or as stack dump error.
Error during search occurred - com.sapportals.wcm.WcmException: Index does not exist;index=ourindex (Errorcode 2007)
Does anybody have any information on a fix for this?

Hi Aaron
Indexes are created in ECC or any other SAP for trex search and sometimes indexes may be have to be rebuild, have you checked this particular index shown in the error message 'ourindex'
Bhudev

TREX - Search Failure - HTTP Server error: 503 - Queue Server down

Hello,
I've got a problem with TREX, the following tasks results in erros:
Default Search
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Creating Index
Error 503
- On Index Administration: indexes status are green
- On TREX Monitor: Takes long time to loa. HTTP Server and Name Server are green. There is no entry for Queue Server
- On TREX Monitor > Display Queues: Takes a long time and then no queues are displayed
- On Portal Monitor > Request Overview: Requests for TREX takes pretty long time
Starting Time: 9:16:23 AM
Starting Date: May 19, 2010
Request Name: NW:J2E:SRV:HTTP
User ID: <my user>
Outbound Data: n/a
Duration: 395671
CPU Time: 5812
Component Entries: 26
Component with Largest Net Time: EP:KM:TREX:HTTP:<host>:30205
Largest Net Time: 38867
Component with Largest Net CPU Time: EP:PRT_render:.../com.sap.km.TrexMonitor
Net CPU Time: 5674
Could you help me with procedures or guides on how to solve the problem and start the queue server?
kind regards,
Rafael

BASIS team reseted TREX and it's working again

6.1 search engine customization doc error

I'm not sure who to report this to, but there seems to be an error in the documentation for the search engine customization examples.
The page is at http://docs.sun.com/source/817-1831-10/agsearch.html
The section in question says, "The following sample code lists the top ten articles on Java Web Services on a site"
The first line of HTML/JSP says:
<s1ws:search Collection="Articles" Query="Java Web Services" />
Note that "Collection" and "Query" are uppercase.
If you copy that whole example block into a JSP and run it, you get server errors.
On my machine (Win 2000), the error messages say the attributes are invalid according to the TLD. In the TLD, they're lowercase and if I change them to lowercase, the page runs (after having changed the collection to match my local config.)
If that saves anybody any headache time, so be it.
Dave

Thanks for the note, David. It's been forwarded along.

I am not able to purchase apps, I'm not getting any error alerts. I just get no response when I attempt to purchase. Also when I attempt to use a search engine to find a itunes app I just get redirected.

I am not able to purchase itune apps. I do not receive a error message.
I do not get a response when I attempt to purchase.
When I use a search engine to find a app and it is to be
Found at the itunes site I get redirected.

Have you tried resetting and restarting > iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
Or restoring > iTunes: Restoring iOS software

Certain websites i.e.google, yahoo, or other search engines are not found in my server. Why? They were last week. I can only access different countries' google search engines. Error 404 comes up repeatedly. Can anyone explain how to fix this?

search engines and other websites are not found in my server although they were about a week ago. Now Error 404 pops up every time I try to access the websites or search engines. I am not entirely sure when it started exactly, but if there is a way to fix it, I would be very glad to hear it.

Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
See also http://kb.mozillazine.org/Error_loading_websites

I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

Question
I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can some document make an error when the Search engine is working

Hi everybody, now I'm asking your opinion about this.
I'm install the Sun web Server 7 and work fine, I was thinking that but when I try to make some search I have something like an Internal error. I don't expect that, only want a message like not found or something.
Next we try with the same word, but change to capital letter the first one and walaaaa, the search was successful and the search engine found the documents.
This situation is happening with some words, like "bank", is I search for "bank" I have that message "Internal Error" but if I search this one "Bank" I found in my documents...
I think that maybe It something in the documents, but I don't know what to think now... When I seacrh in the logs when I index the files I only see this, but I don't know kind of error is... and is this has a relation with my situation...
[26/oct/2007:10:07:15] ERROR: ZP ZipEntryProcessor not found: ngnova.document.ZipEntryProcessor
[26/oct/2007:10:07:15] ERROR: ZP ZipEntryProcessor not found: ngnova.document.SOEntryProcessor
[26/oct/2007:10:07:15] ERROR: ZP ZipEntryProcessor not found: ngnova.document.SOEntryProcessor
[26/oct/2007:10:07:15] ERROR: ZP ZipEntryProcessor not found: ngnova.document.SOEntryProcessor
[26/oct/2007:10:07:15] ERROR: ZP ZipEntryProcessor not found: ngnova.document.SOEntryProcessor
[26/oct/2007:10:07:15] ERROR: ZP ZipEntryProcessor not found: ngnova.document.SOEntryProcessor
What you think??? Are you see something like that before??

We had a problem a year or so ago similar to this and it turned out that we had documents that contained special control characters and that was tripped up the search engine. The symptoms were similar -- if we searched for certain words, we'd get an error, but other words would return results fine. The reason turned out to be that when we were getting the error the collection of results contained a file that contained a control character.
I see I'm a year late in responding to your problem, but, hey, if someone else comes across this detail, great.
Dave

TREX search engine error

Similar Messages

Maybe you are looking for