TREX search for Funtional Area doesn't work properly

Hi Masaya,
Do FN objects exist in SAP? Were they created prior to indexing or do you have the delta indexes setup?
Kind regards,
Luke

Dear Luke,
Thank you for your great help.
This SAP note seems very helpful for our issue.
I will try this SAP note (Support Package) and report its result.
Best Regards,
Masaya

Similar Messages

Searching for a song doesn't work

I have a MacBook Pro 2006, with OSX version 10.8.6, and I am using iTunes version 10.4.
I have been getting this problem on and off, where I open iTunes, or it's been open for a while (it doesn't really make a difference), and I type in the search box to search my library for a song that I KNOW IS THERE, and the library won't react. It's as if the search bar doesn't exist/isn't doing anything.
Can someone help me please, this is a really frustrating issue as I have over 16,000 songs, so it's near impossible it fish through all of them for one song manually.
Thanks in advance!

Go here to ask iTMS Customer Service for help: http://www.apple.com/support/itunes/musicstore/podcast/
Mitchell A.
Producer and host
Creating Success Podcast
G4 Mac OS X (10.3.9)

After installing Mavericks, office for mac 2008 doesn't work properly

After installing mavericks, office for mac 2008 is slow, unresponsive a lot of the time, and slows my whole mac down if i want to do other things at the same time. Is there a solution that doesn't involve spending loads of money on a newer version of office for mac?

All Good. Are there any pending updates for MS Office by chance? Just check under the Help menu in the top Menu when you open Word.
I highly recommend you to reinstall the latest Office 2008 update > http://www.microsoft.com/en-us/download/details.aspx?id=36897 Note that Office 2008 is not supported by Microsoft anymore (thanks Mende1 for the link)
Pete

The solution for Bug 4900349 doesn't work properly?

Hi friends,
I think that exists an incorrect behavior at invoices form (TSMINWKB) when we try to change of tab: once the PAYMENT_OVERVIEW_BUTTON is disabled when we change of tab page, is not possible to enable it returning to the same tab.
Have a look at :
tab_navigation_pkg.invoice_regions
at
IF (event = 'WHEN-TAB-PAGE-CHANGED') THEN....
app_item_property.set_property('CONTROL_INV_PAY.PAYMENT_OVERVIEW_BUTTON',
ENABLED,PROPERTY_FALSE);
SO.. the button is disabled but it isn't enabled again when you execute the when tab pag changed trigger...
May be an incorrect solution for the bug?
Any ideas? Do you have the same behavior?
It's possible to enable the button, going to INV_SUM_FOLDER block and changing to a record with data on payment metod tab page... but.. obviously that's not the appropiate way to enable the button...
Jose.

Hi again, sorry , the screen is:
APXINWKB.fmb
Jose.

Key Command for "Go to Next Marker" doesn't work properly

Hi there!
While using Logic Pro 9.1.8 with Mountain Lion (10.8.2), it seems that the Key Command for "Go to Next/Previous Marker" doesn't work properly.
The only effect is, that a grey rectangle moves in the top of the Arrange Area while ignoring the Markers itself.
Any suggestions to solve it or is it me that is misbehaving?
Cheers, GJ

Hi
The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
Default KC are Control Command +Arrow Left/right
Step 1: check you are using the correct key command :-)
CCT

Skill Search works fine from search center, but it doesn't work from Lync client

My environment consists of Lync Server 2013 and SharePoint Server 2013.
I configured skill search and it works fine from search center, but it doesn't work from Lync client. An error appears says"error occurred during the search, please try again".
I configured these URLs in my client policy
set-csclientpolicy -identity global -spsearchinternalurl http://<Sharepoint Server>/_vti_bin/search.asmx
set-csclientpolicy -identity global -spsearchcenterinternalurl http://<Sharepoint Server>/searchcenter/pages/peopleresults.aspx
I checked these URLs from the browser and they work fine.
I disabled anonymous access to _vti_bin, but no change then i checked lync log but i didn't find any error then i used Wireshark and found that when Lync client contacts Sharepoint, Sharepoint responded to it with internal server error http 500
Please advice for what to do

Hi,
Thanks For your sharing.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

Interleaving doesn't work properly for Cisco 3725 router, IP Plus IOS

Dear All,
I am deploying VoIP between 2 sites using Cisco 3725 routers. Currently, interleaving doesn't work properly which result in voice quality problem only during data trafic. Issuing "show int multilink 1" command, I realise that there is no interleaves even though VoIP call and data are traversing on the link.
Attached here is the info for your reference.
Any idea, please help.
Thanks in advance.
Duc

Here is the info:
VNHCMR01#sh call active voice brief
: hs. + pid:
dur hh:mm:ss tx:/ rx:/
IP : rtt:ms pl:/ms lost://
delay://ms
MODEMPASS buf:/ loss /
last s dur:/s
FR [int dlci cid] vad: dtmf: seq:
(payload size)
ATM [int vpi/vci cid] vad: dtmf: seq:
(payload size)
Tele : tx://ms noise: acom: i/o:/ dBm
MODEMRELAY info:// xid:/ total://
speeds(bps): local / remote /
Proxy :,,,,, endpt: /
bw: / codec: /
tx: /,/,/
rx: /,/,/
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
12FF : 5798794hs.1 +202 pid:80 Answer 710 active
dur 00:01:14 tx:3721/74420 rx:3721/74420
Tele 0/0:15:424: tx:74420/74420/0ms g729r8 noise:0 acom:24 i/0:-50/-29 dBm
12FF : 5798794hs.2 +202 pid:81 Originate 81555 active
dur 00:01:14 tx:3721/74420 rx:3721/74420
IP 159.12.56.1:19526 rtt:30ms pl:73890/40ms lost:0/1/6 delay:67/67/107ms g729r8
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
VNHCMR01#sh int mu1
Multilink1 is up, line protocol is up
Hardware is multilink group interface
Description:
Interface is unnumbered. Using address of FastEthernet0/0 (159.12.55.2)
Backup interface Dialer1, failure delay 30 sec, secondary disable delay 30 sec,
kickin load not set, kickout load not set
MTU 1500 bytes, BW 256 Kbit, DLY 100000 usec,
reliability 255/255, txload 33/255, rxload 13/255
Encapsulation PPP, LCP Open, multilink Open
Open: CDPCP, IPCP, loopback not set
DTR is pulsed for 2 seconds on reset
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters 00:00:50
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0/0 (size/max total/threshold/drops/interleaves)
Conversations 0/5/64 (active/max active/max total)
Reserved Conversations 1/1 (allocated/max allocated)
Available Bandwidth 56 kilobits/sec
5 minute input rate 14000 bits/sec, 69 packets/sec
5 minute output rate 34000 bits/sec, 72 packets/sec
3062 packets input, 100509 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3078 packets output, 298192 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
VNHCMR01#sh ppp multilink
Multilink2, bundle name is VNHANR01
Bundle up for 02:47:34, 3/255 load
Receive buffer limit 12192 bytes, frag timeout 1000 ms
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x145A1 received sequence, 0x21A41 sent sequence
Member links: 1 active, 0 inactive (max not set, min not set)
Se0/2, since 02:47:32, 320 weight, 312 frag size
Multilink1, bundle name is VNBHCR01
Bundle up for 16:07:32, 35/255 load
Receive buffer limit 12192 bytes, frag timeout 1000 ms
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x2DB8D received sequence, 0x536BD sent sequence
Member links: 1 active, 0 inactive (max not set, min not set)
Se0/1, since 16:07:30, 320 weight, 312 frag size
VNHCMR01#sh run int multilink 1
Building configuration...
Current configuration : 380 bytes
interface Multilink1
description
bandwidth 256
ip unnumbered FastEthernet0/0
service-policy output llq
backup delay 30 30
backup interface Dialer1
ip tcp header-compression iphc-format
no ip mroute-cache
ppp multilink
ppp multilink fragment delay 10
ppp multilink interleave
ppp multilink group 1
ip rtp header-compression iphc-format
end
VNHCMR01#show policy-map
Policy Map llq
Class voip-rtp
Strict Priority
Bandwidth 50 (%)
Class voip-sig
Bandwidth 8 (kbps) Max Threshold 64 (packets)
VNHCMR01#show class-map
Class Map match-any class-default (id 0)
Match any
Class Map match-any voip-sig (id 1)
Match access-group name VoIP-SIG
Class Map match-any voip-rtp (id 2)
Match ip rtp 16384 16383
VNHCMR01#

TRex search for iView

Hello, I was wondering how to do make the TRex search for the content in iViews and link to those iViews into the portal when the TRex send the results for search. Right now the TRex searches in the repositories specified in the datasource and the results link to the content of documents. Any ideas?
Thanks.

Hi Pablo,
> I'm starting to think I will have to pass
> some fee for all your help
Don't hesitate, I can pass you my bank account details...
> I've seen this forum ...
Oh, don't mix up the PCD repository which can be searched for iViews ==> that is iView names, maybe description etc, but this does not mean the content itself.
As far as I understand your original question, you would like to search "real content" ("what's printed within the iView") in that kind that clicking on a search result link would lead you to the corresponding navigation target.
For this, the scenario given in my orignal answer in this thread should be the way to go. Even if this works only in "internet" scenarios properly, for this scenario cannot distinguish between different roles / access rights.
> is SPS 14 the same that SP14?
Yes. "SP" = "Support Package", SPS = "Support Package Stack", the "new" common number for all components playing together.
Hope it helps
Detlev

Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

Question '''OS Win2000''' using '''FireFox 5.01 - portable''' Problem: '''Plug-in for Windows-Mediaplayer doesn't work

'''OS Win2000'''
using '''FireFox 5.01 - portable'''
Problem:
'''Plug-in for Windows-Mediaplayer doesn't work '''
cause: presumably - Win2000 only copes with WMP 9.0
Your FF 5.01-portable works only for WMP 12 (??)
I have no problems with WMP when I use my regular FF 3.6 on this old Win2000. - WMP - Plug-in of FF3.6 works perfectly on my Win2000
'''question:'''
What can I do to get WMP running on my Win2000 using FF5.01-portable ?''''''

See the Portable Firefox support forum for help with that. 
http://portableapps.com/forums/support/firefox_portable

I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps

My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

TREX search for Funtional Area doesn't work properly

Similar Messages

Maybe you are looking for