TREX support for IDOCs only no PI involved

I am aware of the TREX index support for PI XML content.
What if only IDOCs are used. No PI.
We09 is timing out. So we need a better index.
Is Trex and option ?

Hi Che,
Please have a look at below blog
Principal Propagation using SAP Assertion Ticket CRM -> PO7.31 Single Stack
regards,
Harish

Similar Messages

SA PI 7.1 EHP1 - Support for IDOC Adapter using AAE

Hi,
Can anyone confirm if the SAP PI 7.1 EHP1 supports the IDOC adapter in the AAE ?
Cheers
Colin.

Hi Colin,
I am workinngt on EHP1 PI7.1,but no support for IDoc Adapter in the AAE.
The new features added for IDoc adapter is IDoc packging and new conversion module added .
we have to wait till next release,but not sure...
Regards,
raj

Support for Read Only EJBs ?

Hi;
I'm trying to discover if OC4J 9.0.3 provides support for Read Only Entity EJBs? If anyone can point me to docmentation on deployment descriptor elements controlling this, I'd be most grateful..
Thanks in Advance;
Simon

Simon -- We do support read-only concurrency in OC4J. Have a look at the EJB Developer's Guide (available on OTN) for more information. It is in the section on locking modes.
Thanks -- Jeff

For updating Silverlight in Windows, the System Requirements say I must have "X86 or x64 (64-bit mode support for IE only)"; what does this mean?

I have a 5-year-old laptop, given to me by someone else as a gift, that uses: a 32-bit operating system, Windows 7 (with Service Pack 1), and Internet Explorer 8. A system message told me I need to upgrade Adobe and Silverlight. I accomplished the Adobe upgrade without problem. For the Silverlight upgrade, the instructions say to first uninstall the existing Silverlight software before installing the updated software. However, in the System Requirements, for Windows, it says the phrase that I quoted in the "Question" box above. I am not sure what it means. I am confused by the words "for IE only"; I'm assuming IE means Internet Explorer, but I don't know what this short phrase is trying to say. Is the "bottom line" that my 32-bit operating system is insufficient to receive the Silverlight upgrade, or is it enough? I need to know. I don't want to uninstall my existing Silverlight software yet, because of the possibility that I can't install the new software; I don't know what adverse effect would occur if my laptop doesn't have any Silverlight working on it at all. So I'd appreciate being filled in on this. Thanks!

Your computer can run silverlight just fine. They are just saying that Silverlight is a 32bit application, except for Internet Explorer, where it can run as 64bit. It doesn't make any difference for you, so just go ahead and install it.

TREX support for File Formats?

Hi All,
Can TREX search inside a .TIFF File?
If yes, is there any apecial configuration that we need to do?
If no, any workaround possible?
Cheers!

Hi Anjan,
I guess you mean a TIF-file.
Picture file formats are not supported.
Please find the supported file formats of TREX and further recommendations under this notes:
Note 663630 TREX 6.1: Supported File Formats
Note 761489 TREX 6.1: Requirements and Recommendations
Regards Matthias

Support for Label-Only-Inferred LSP

Does the Cisco Service Provider IOS have the capability to support L-LSP. Need to find out if we can support more then 8 CoS using the E-LSP.
Is there any other mechanism for supporting more then 8 CoS on an MPLS backbone

At the moment L-LSP is not supported as far as I know. At the Networkers BOF session the developpers basically got the response from all the service providers present at the time that L-LSP feature is not high priority.
There are no "sexy" other options. What is the need to support more than 8 classes? I mean you can transport IP packets mithout touching the DSCP values through an MPLS backbone.
Last question: Do you really want to monitor and frequently fine tune more than 8 classes per interface?

Do we need to create message interfaces for idocs and rfcs thatare imported

do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaces

hi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

Hi there,
If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
Lion is fantastic, albeit maybe rushed.
Any other queries, just ask,
Nathan

Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

Hi,
FAN support along with all of the RAC support enhancements in Tuxedo 12.1.3 are licensed as part of the Exalogic Elastic Cloud Software which is included with Exalogic and SuperCluster systems.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Jwsc Error - Only HTTP ports are supported for JAX-WS

Hi
I am trying to create a Webservice from wsdl. I have been able to generate java files and jar file with wsdlc ant task.
However when i try jwsc I get follwoing error
[jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
<----- follwowing task for generating java files --->
<taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/>
<target name="generate-from-wsdl">
          <wsdlc
               srcWsdl="wsdl_files/UserPrefWebService.wsdl"
               destJwsDir="web/web-inf/lib"
               destImplDir="src"
               packageName="com.ws.userpref"
               type="JAXWS"/>
     </target>
<----- follwowing task for generating class files ----THIS IS FAILING --->
     <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />
     <target name="build-service">
          <jwsc srcdir="src" destdir="ear">
               <jws file="com/ws/userpref/UserPrefWebServiceImpl.java"
                    compiledWsdl="web/web-inf/lib/UserPrefWebService_wsdl.jar"
                    type="JAXWS"/>
          </jwsc>
     </target>
<----- This is the Error --->
C:\Development\CFCDemoWorkspace\UserPreferencesServer>ant build-service
Buildfile: build.xml
build-service:
[jwsc] JWS: processing module /com/ws/userpref/UserPrefWebServiceImpl
[jwsc] Parsing source files
[jwsc] Parsing source files
[jwsc] 1 JWS files being processed for module /com/ws/userpref/UserPrefWebS
erviceImpl
[jwsc] C:\Development\CFCDemoWorkspace\UserPreferencesServer\src\com\ws\use
rpref\UserPrefWebServiceImpl.java 18:8
[jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
[AntUtil.deleteDir] Deleting directory C:\DOCUME~1\138904\LOCALS~1\Temp\_3os716
BUILD FAILED
C:\Development\CFCDemoWorkspace\UserPreferencesServer\build.xml:24: weblogic.wse
e.tools.WsBuildException: JWS Validation failed.
Total time: 10 seconds
Does any one has any input on this error?
Thanks
Srikant

Thanks David,
Below is the wsdl
<s0:message name="ws_getUserPreference">
<s0:part element="s1:ws_getUserPreference" name="parameters"/>
</s0:message>
<s0:message name="ws_getUserPreferenceResponse">
<s0:part element="s1:ws_getUserPreferenceResponse" name="parameters"/>
</s0:message>
<s0:portType name="UserPrefWebServicePort">
<s0:operation name="ws_getUserPreference" parameterOrder="parameters">
<s0:input message="s1:ws_getUserPreference"/>
<s0:output message="s1:ws_getUserPreferenceResponse"/>
</s0:operation>
</s0:portType>
<s0:binding name="UserPrefWebServiceSoapBinding" type="s1:UserPrefWebServicePort">
<s2:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<s0:operation name="ws_getUserPreference">
<s2:operation soapAction="" style="document"/>
<s0:input>
<s2:body parts="parameters" use="literal"/>
</s0:input>
<s0:output>
<s2:body parts="parameters" use="literal"/>
</s0:output>
</s0:operation>
</s0:binding>
<s0:service name="UserPrefWebService">
<s0:port binding="s1:UserPrefWebServiceSoapBinding" name="UserPrefWebServicePortSoapPort">
<s2:address location="https://localhost:7001/UserPrefService/UserPref"/>
</s0:port>
</s0:service>
</s0:definitions>
do i need to add <wlhttptransport/> in jws during the buid?

I have never been able to open my itunes store. I was on the phone with support for 1.5 hours today, no luck. I would like to purchase a book only available on itunes. Can someone please help!

I have never been able to open my itunes store. I was on the phone with support for 1.5 hours today, no luck. I would like to purchase a book only available on itunes. Can someone please help!
I have tried
- setting time and date
- uninstalling
- upgrading itunes
- changing credit card
Any other suggestions?

Update your safari. Install this: http://support.apple.com/kb/dl1569
The itunes store relies on certain components of safari, regardless of if you use it or not.

HT3825 Apple needs to add system support for Nikon D4 NEF Previews... currently only D800.

Apple has added support for the Nikon D800 to 10.6 but not the Nikon D4? OSX.6 needs to be updated to be able to view thumbnails and previews to raw files from the Nikon D4. The only update that apple has released only affects iPhoto, not the system.

AppleTV is Steve Job's hobby product?
Perhaps AppleTV has increased sales on the iTunes store, but I wonder if the AppleTV itself has made any money for the company. For all we know, Apple may be losing money on every production and sale of the product, just like MS and Sony have for their consoles. I think the AppleTV is a great idea, but it is too limiting for it to be universally accepted. In fact, the AppleTV should be the universal player of set-top boxes. Apple, I guess, is not interested in the video server market.

Does any one know of a property rental software to track rents and expenses for multiple properties that works on the IMAC? Quicken Rental Property is only supported for Windows. Any suggestions appreciated.

Has any one found a comparable software for IMAC that could replace the Quicken for Rental Properties that is only supported for windows?

And Google found
http://property-management-software.findthebest.com/d/a/Mac-OS-X

How to force support for Long preamble only?

how to force support for Long preamble only?
Last edited by jackphil (2012-01-04 03:17:12)

Hi,
Thanks for your reply.
I have downloaded the workspace containing the sample application from the address you provided. I have done the following changes to the application:
1. Created AdcsResourceBundle_fo.java in the same package as AdcsResourceBundle.java
2. Configured locale in faces-config.xml
<locale-config>
      <default-locale>fo</default-locale>
      <supported-locale>fo</supported-locale>
    </locale-config>Indeed the messages are taken from AdcsResourceBundle_fo.java (I've tested the PanelCollection), but the problem with the number inputText is still there.
Test scenario:
Drag and drop DepartmentsView1 from Data Control to showDetailItem 1 in Table.jspx -> Create -> Forms -> ADF Form
When the page is run, the 'Splash' image and 'Loading..' remains on the browser window and nothing else happens. And again, no messages in the server log.
Is there anything else that needs to be configured?
Anca

Macbook Pro support for two external displays

I keep seeing articles since yesterday stating that the new MBP retina display supports 3 external monitors and the new Macbook Air supports two (through just one ThB port?) but how come no one says anything about the new regular MBP's support? If the Air supports two isn't the regular MBP also supposed to be able to work with two external monitors?

USB video has performance limitations, but it's fine for stuff that doesn't involve fast-action video.
ah yes, sorry, the new USB 3 now supports speeds up to 5 GB/sec so it may become suitable for AV use. Actually, only ThunderBolt (and HDMI) has higher speed than the USB 3 port.
but I just found this page here at the Apple support, which states that the Air and Pro both support 2 displays and the retina MBP one more through the HDMI port, so I guess now it's official

TREX support for IDOCs only no PI involved

Similar Messages

Maybe you are looking for