TRFC error status

Dears,
I am getting the error "RfcAbort: get_idoc: file(IDOC TYPR) exist,..." at SM58 transaction and I can't find anything here about that message error.
I have checked the WE02 transaction and the Idoc was created, the RFC destination that the Idoc should be sent is working fine.
Testing the partner at IDOC transaction no problem was found.
The message error at SM58 is incomplete, is there any other transaction that I can check to clarify what would be happening?
Thanks for your attention.
Best Regards!
Anaer

Hi Thanga, thanks for your response.
I had already tested the connection and it is working fine.
When I tried to activate the debug option I get the error message "You cannot debug type T connections".
Is there any system log that I possibly could check to get more detais of SM58 errors?
Thanks in advance!
Anaer Lima

Similar Messages

TRFC Errors in BI

Hello Gurus,
Why I have tRFC Errors in the Development System BI..
THANKS...
barish

Hi,
we see at the error message we find that the failure is due to Non-arrival of IDOCs from Source System to BW.
Idocs posted successfully with status '03' sometimes don't get through to the receiver port. i.e. It will be still waiting in the trfc queue(SM58) these also refer to as 'trfc errors.
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
Check Note 561880 - Requests hang because IDocs are not processed.
Tarak

TRFC's in Error Status in P54 (SNC) System

Hi SNC experts,
Lots of tRFC are in error status when i am executing Sm58 Transaction.
The error text is "RFC destination A1PCLNT001 does not exist ".
Please guide me on this..
is there any SAP note relevant to this...so that these tRFC can be corrected.
Will highly appreciate your quick reply..
Thanks,
Indu

Hi Indu,
Check RFC connection again for correct Logical system assignment, Check Partner profile and also Ports in Idoc Processing (WE21) for RFC Destination.
Regards,
Vasu

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

InfoPackage loading giving IDOC Error: Status 51

Hello Experts,
1) I created a DB view (ZZVIEW05) in the SD area on R3
   and it extracts data OK in RSA3.
2) I replicated the DataSource in BW, Created InfoSOurce
   activated and created an InfoPackage.
3) Scheduling the InfoPackage is failing with an Error:
      Transfer(IDocs and TRFC):Errors Occurred
         Request IDOc: APplication document not posted
For the Error, I right Clicked and looked at the IDoc status in the Source System (R3 where we are getting the data from).
The Idoc with Error has a status of 51 and has the following message:
Any suggestions ?
Thanks, BB
Function module not allowed: ABI_IDOC_DISPATCH
Message no. B1252
Diagnosis
     The function module ABI_IDOC_DISPATCH and the
     application object type which were determined
     are not valid for this IDoc.
Procedure
     1. Please check that the process code in the
         inbound partner profile is correct.
     2. If this is the case, you should check the ALE
         inbound methods ALE inbound methods for the
         process code and see whether the specified
         function module and application object type are
         correct.
     3. If this is also the case, then the function
         module and the application object type are not
         permitted for the logical message type, message
         variant, message function and basis type that
         are contained in the IDoc control record. You
         should check whether the correct values have
         been assigned to these fields in the control
         record. If they do have the correct values,
         then the assignment to the function module and
         the application object type needs to be
         maintained.

Hi Dinesh & Sat,
I tried following:
Using WE19.....I was able to manually pump the IDOC that got stuck in ALE inbox on R3 side...then R3 was able service the request and send data to BW.
It seems the correct function module (R3 side) to process an incoming BW data request is RSAP_IDOC_DISPATCHER.
Instead ABI_IDOC_DISPATCHER is being invoked, by default, which is giving the problem (seems to be some kind of authorization issue!).
In WE20, I changed the partner profile to process using RSAP_IDOC_DISPATCHER. BUT somehow it is not being invoked.
I suppose some other setup (table entry) is conflicting with my setup ....
Any clues ?
Thanks, BB

Idoc Error Status 51 - " Transaction was terminated by the user"

hi gurus,
i have a problem with respect to T.code WE02. After i process the billing documents in VF04, i get error status notification in WE02 with Status 51 as " Transaction was terminated by the user". This error is not coming for all billing documents but for only some of the billing documents in that particular list. After reprocessing, the idocs are generating without any errors. what could be the possible reason for the intial error.
Thanks

Hi-
After reprocessing the idoc's the data comes ..
Idoc is a data carrier.i may get stuck in the TRFC's .
So after processing it gets pullled.
Hope u have understood the cocept behind this,.
Regards,
Vishwa.

Idoc or trfc error

Hi sap bw'iets
can any one describe step-by-step process to sloving IDOC or TRFC ERROR in production support.
thank you.
regards,
kiran

hi kiran,
sometimes idocs stucks in the source system, so it shows yellow in the monitor even if every thing else is showin green. so to correct this, go to environment -> Transact RFC -> In the Source System. If the status is showing "Executing" then leave it, otherwise u can drag it to BW by selecting execute LUW (F6), by selecting the tRFC.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

QRFC & tRFC Errors at the time of Production

Hi all,
If i got the qRFc 0r tRFC Errors in PRD system, then do we generally release those queues manually by going SMQ1 & smq2 and for tRFC Errors SM58 or do we schedule the STD programs to clear those strucked queues???
Dont provide any Blogs plzzzz
Regards
Suman

Hi
1) clear the queues in SMQ2,first try to activate them,if that doesn't work them delete them
2)You may need to re-register your queues.
Follow SXMB_ADM -> Manage Queues -> Deregister Queues
Afterwards, re-register the queues and activate from the same screen
3)Only use SMQ1 (outbound queues) and SMQ2 (inbound queues) if re-registering doesn't fix it. You will need to give the queues sometime to get activated so be patient.
4)From SXMB_MONI go to Queue ID of the message, a click here shall take you to qRFC monitor.
if the messages are stuck, you should see an entry indicating number of messages stuck in the queue.
a double click on the entry shall take you to detailed list.
if the messages are stuck because of any error (other than queue not registered etc for e.g. a message failure) then the first message shall show you that.
if indeed you find a message stuck in the queue then the way is to delete the stuck message (DONT DO THIS IN PRODUCTION SERVER without being sure of what does this mean for that particular process !!) and unlock the queue from previous screen.
5)Go to smq2 and execute F8. Then it should come as Nothing was Selected.
If any queues are present then open a queue.if the status is SYS ERROR check the entries,right click on the status text and give save LUW.This brings queue to READY. .
GoTo-> Qin Scheduler: check for the scheduler status to be inactive->Edit-> Activate Scheduler: status frm inactive to starting to wait.Now the queue will be RUNNING.U can see the entries in the queue moving.
Now go to SMQ3, right click on the queue and give Restore LUW.
6)this basically means tht message is waiting in the queue.
in sxmb_moni go to queue Id column and double click on the entry .It will take u to SMQ2.Check the status of the queue
If its SYSFAIL or STOP then double click on it and try to correct the error.After correcting the error send the message again.Also check whether the Queeu is Registred in transaction SMQR.
7)Select your queue form the sxmb_moni, you will reacht he QRFC monitor.
Here you will see some lock figures on the , Select on the 'Unlock Queues'. Activate your queues once again.
This is if your data is correct and queue is stuck. You should only delete the queue if it has errored out due to incorrect data and you need to urgenetly process the rest of the data in the queue.
If you drill down one step more than selct the error message and on the menu select edit-->Save LUW.

Reprocessing of tRFC Errors

Can anyone tell me whether we reprocess tRFC errors for all kind of RFC errors or reprocessing is restricted only for specific errors ..for eg:No authorization to send IDOC..

Kondal rao,
It is necessary to process all tRFC units. There can be many reasons why a tRFC failed. One example is target system not available. Another example from my testing scenario recently is ECC system generates idocs to PI. Lets say there were some duplicates in the buffer of PI adapters. Then the idocs will fail in ECC. This means the idocs are not transferred to PI.
Normally in this case, when the buffer is cleared the entries in SM58 should get picked up by the batch job and get pushed to PI. There can be some cases where you might want to process manually.
Tables:
When SAP issues commit work, the first ones to be processed are updates tasks (V1 - updates). Once done, SAP looks at the table ARFCSSTATE for t/qRFC. If any entries are found, those are processed.
In case of qRFC the entries are processed in the order in which they are received.
If an entry fails, the status of the same is set to SYSFAIL.
The best way to understand this process is to open SM58 and then click on the 'I' icon next to execute. It has all the good information you are looking for.
Thanks,
Vikram.M

Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

Hello,
When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
When I manually download the latest copy of itunes and double click to install it, it failes with :-
iTunes installer completed
The installer encountered errors before iTunes could be configured
Errors occured during installations. your system has not been modified
Please run the installer again. finish to exit
When I look at the event loggs I can see :-
Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
Many Thanks

Hello there, G-Oker.
The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SAP PI Message Cancellation Alert - Message does not have restartable error status

Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
Sudheer

Hi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer

TRFC error status

Similar Messages

Maybe you are looking for