Tri-fold template prints unevenly

Exported a pdf of a tri-fold template.
Printing on an 8.5 x 11 sheet results in a left margin larger than the right, so it doesn't fold in the correct places.
Didn't do anything to the original template settings.
Have played with various scale settings (e.g., set for printer margins, etc.)--no luck.
Canon iP4300 printer.

Check your printer manual and see if borderless printing is possible. If so, choose the least amount of expansion, if that option is available. You can't resize an existing template to accommodate that wide margin and still fold properly. You could start from scratch and design your own layout to fit the parameters of your printer. Otherwise you may have to buy a new printer. Check the specs before buying.
Walt

Similar Messages

Tri fold template for Pages?

Tri Fold templates, can anyone recomend one for Pages?

There are several in the Template Chooser.
They are all nice.
Peter

Tri-fold template

I have tried several tri-fold templates by users and have found them slightly off. Would be nice for Adobe to put on into the template library - just a simple tri-fold.

One approach would be to set up the document as 3 columns with .25 gutter and .125 (1/8 in) outside margins (top and bottom can be anything you like). Drag two ruler guides onto the page (this is just for helping you move the column guides). After each guide is dragged, it should be selected, and you can type the exact position you want into the x: field on the control panel, for example 3.6875 - .125 (InDesign can do simple math in the fields), and press enter to move the guide.
From the view menu, unlock the column guides, then drag them so the left one of the pair snaps to the ruler guide (presuming you subrtacted the .125).
The other side of the sheet needs to be a mirror image. You might find it easier to move the ruler zero point to the right edge of the page to set this side up. If you do, you'll want to set the first guide to -3.6875 + .125, and the second to -6.25 + .125, then move the column guides to the right.
Now relock the column guides so they don't move. You can delete the ruler guides if you like, since the column guides are now in the same position.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Access Denied When Trying To Install Printer - Windows 7

Good Day
I have a serious problem on a client's computer. All I need to do is connect the laptop to a network printer, but I am having a lot of difficulty in doing so.
First the details of the laptop: Windows 7 Professional 64-bit connected to network using ETH cable. Avira Professional antivirus running, firewall disabled on pc, user is member of administrators group only.
Details of the printer: Xerox Workcentre 3220, connect to network using ETH cable, but also shared on pc also running Windows 7 64-bit Professional.
I am able to ping the printer and have connected all the other pcs on the network to the printer without any troubles whatsoever. Printing, scanning - everything is working fine for the other pcs. I am also able to connect to shares from the laptop to any
other pc.
So here is my issue with this specific laptop:
Firstly, when using the "Add Printer" wizard, the "Add a local printer" option is greyed out.
So I tried connecting to the printer using the"Add a network, wireless or Bluetooth printer" option, which seemed to be working, but during installation it gives an Access Denied error and undoes the installation.
Then I tried connecting to the share of the printer on one of the other pcs, which had the exact same result.
I then tried to modify an other printer, by firstly trying to add a new Local Port, but the I recieve the following error: "Specified port cannot be added. Access is denied."
I tried then adding the driver using the Windows Print Server, but the buttons were unavailable.
After reading on many forums, I accessed the Print Management console (Control Panel -> Administrative Tools -> Print Management)m and tried adding the printer and ports there, but recieved an "Access Denied" error every time.
Basically whatever I tried, I recieved "Access Denied" errors. I created a new user, which is only a member of the Administrators group. Logged in with new user, without any success in connecting to the printer. I then tried adding security permisssions
for "everyone" to the folder C:\Windows\System32\spool\PRINTERS, as I read on another forum. I tried modifying the group policy using gpedit.msc and also using the Local Security Policy, although I could have missed some things in these two places,
but basically with a quick glance, everything seemed fine. I am sure there are no virusses, etc on this laptop and as I have said all the other pcs connected to the printer very easily.
How can it be that I cant install a printer on this laptop, while I was able to do so a year or so back?
I have gotten a few suggestions that it will in the end just save me time by formatting the pc and reloading all the data and programs, but this isn't an option I really want to take. And then I have previously had issues with the "Add a local printer"
option greyed out and unable to add printers, etc, but then I was able to solve the problem by creating a new user and then switching to that user - which indicated a possible user profile corruption. But in this case even that did not work.

Hi,
please check your below configuration:
1.Start the policy editor (Control Panel -> Administrative tools -> Local security policy)
2.Select “Local policy” item
3.Find the item “Devices: Prevent Users from Installing Printer Drivers” in the section Security Settings -> Security Options and change it to Enabled
4.Go to “Security Settings -> User Rights Assignment” section and check, that “Load & Unalod Drivers” option contains the active user group. It important, that even if it has “All Staff” already, it still could miss “Administrators” group, so it’s necessary
to add it manually.
In addition, this thread could be referred:
http://social.technet.microsoft.com/Forums/en-US/8c3c3d97-9d85-4ab0-9fc8-4b7aba202fb2/windows-cannot-connect-to-the-printer-access-is-denied-please-help?forum=itprovistaprinting
Karen Hu
TechNet Community Support

Can I split a tri fold into individual pages?

I have a tri fold brochure that I've created. Prints great when two sided. However, I need each part of the tri fold to be an individual page (will be 6 pages total). Is there a way I can do this withing InDesign so I don't lose quality?
This is how I did it but it is not the right way. I exported the pdf. and then opened it up in Photoshop and cropped each individual section and saved it out as a png. Then I used Photoshop's PDF automation script to create the PDF. But text looks wonky and everything is fuzzy bc its a flattened image.
Any help is appreciated!

SRiegel wrote:
If you turn off "Allow Document Pages to Shuffle" in the Pages pallet, you can arrange your 3-page sections side-by-side.
Would this work if I only have 2 pages that are set to have 3 columns? (totaling 6 sections).

Where can I find good ID pocket folder templates?

My ID software came with a huge folder of templates for all kinds of projects, but strangely enough, there are no pocket folder templates. I wonder why?
Aside from printer's websites, are there any ID pocket folder templates in some obvious places that I've missed that anyone can suggest?
Thanks in advance for any suggestions!
mtngigi

I just want to second Peter's suggestion.
To get a "folder template" made up the company has to make or have made a "die-forme" which can add extra cost.
If you contact your print supplier and tell them your needs - they should already have a folder template setup that suits a "die-forme" they already have.
That way you don't incur the cost of having the "die-forme" created.

Default Margins on Web Template Print Version

Hi all,
I am trying to change the default margins on a Web Template Print Version. I have created a command button on my templates which sets all the other options on the Export Dialog, however I am unable to set margins using the command parameters. The margins are always defaulted to 20mm. I would like to default them to 6mm so that users will not need to change them for each print.
If this is a configuration setting I am unable to find it. Do I need to modify a standard template or iView? I would appreciate any suggestions.
Platform: Netweaver '04s SPS 13
Thanks,
Mitch

Hi,
I am also facing same problem, have you got any solution. If yes can u plz share with me.
Thanks
Sivaprasad

Background for tri-fold brochure

I want to create a background for a tri-fold brochure. I would like use an image on the internet for the task. I noticed some of my previously used images are not supported.What image types are supported in InDesign?

Most "images from the internet" are going to be far too low a resolution to be useful for a print brochure. Also, unless the image was purchased, or you have specific permission from its creator, you can't legally use it that way.

Applet trying to write print commands to port LPT1

My applet trying to write print commands to port LPT1 and I was able to self sign and run the applet. But I am getting the following type of error:
java.security.AccessControlException: access denied (java.io.FilePermission LPT1 write)
Do I really need a policy file and then grant permission for File writing?
Why self signing is not helping to get the permission for File writing ?
I am using latest jdk1.5 jvm and IE 6.x.
Please clarify.

1. Make sure your applet is run with SUN jre (use the HtmlConverter.exe in the jdk\bin directory)
2. Make sure your signed jar is the one referenced in the html archive tag (did you get the do you trust question)
3. If the method is called from untrusted code (javascript for example) use doprivileged.
4. Some 1.3 versions of the jre only trusts CA signed applets.
If this applet is for everyone (grandma's PC) than signing should be a good way to get the applet
to do what you want.
If it's for a company that has Admin controlled desktops a policy would be better.
I think a good configuration would be a keystore and policy on the company's
Intranet to be used by everyone and if so needed a keystore and policy in the user home
folder to be edited only by admins. Add the 2 keystores to the java.security and the
admins can configure any special privileges to special applets (like IE security zones
but more detailed).
Add the following line to all codebases: "grant { " section in the java.policy/
permission java.lang.RuntimePermission "usePolicy";
Now the user does not have the option of "do you trust" for signed applets. I think this
is a verry good idea because anyone with a jdk can sign their jar.
http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
4th post explaining how to set up your own policy with your own keystore

I am trying to re-print a portion of a photo enlarged through "poster" and can't get just the one "page" to print. Does anyone have a solution?

I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?

Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error when trying to create printed documentation in RH 7

Hello,
I've created a WebHelp project in RH 7 that I'm trying to
make a PDF for, as well. An error always appears when trying to
generate printed documentation, even if only the PDF option or the
Word option is selected. RH 7 processes and builds each of the
pages, index, images, etc. It gets to the very end on the status
bar and an error appears that it failed to generate the PDF.
In the output view, I see that it successfully processed
everything until the end when it says (the last four lines are the
error):
Updating Table of Contents...
Updating Index...
Saving 'GVE_Help_.doc'...
Generating 'GVE_Help_.pdf'...
Failed the generate PDF file '(The path is written here but
has been removed for this post)'...
Failed to save 'GVE_Help_.doc'...
Cleaning up temporary files...
Internal error encountered, Failed to generate Printed
Documentation.
Is there any way to get the Printed Documentation to work
properly in RH 7? I receive the same error for any of the WebHelp
projects I've opened in RH 7. I'm using Windows XP and have Word
2003 on my PC if that helps. I believe, but not too sure, RoboPDF
is still on my PC. May this have something to do with it?
Thanks so much, in advance, for any feedback and help.

Try generating just to Word and then creating the PDF from
there. There is a known problem which affects some users but not
others. Cause not known.

How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

How can I get my photos to print as they look on iphoto? Have tried my personal printer and Walgreens.

Im not exactly sure what you mean by color profile..can you specify? So i have a dslr canon and take great portraits and tune them to exactly how I want them to look, they dont print at all like the colors presented on my screen. If i antique them then they print yellowish. Ive even tried printing them at walgreens because i thought it was my new printer. Hp hasnt let me doown til now. Is ot a printer setting? Ive never had this kind of printing issue.

Trying to install printer - get the message "You can't open the application "OSX installer" because PowerPC applications are no longer supported."

I am trying to install print controller and printer -but get this error message when trying to use the installer:
You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
Any help and/or suggestions would be greatly appreciated
Thanks!

I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c

Tri-fold template prints unevenly

Similar Messages

Maybe you are looking for