Trial version banner doesn't go away

The trial version banner doesn't go away in the full version in modified parts made in the trial version. Normal video is clean, but transitions and modfied parts keep having the trial stamp.
regrads,
Simon

Kevin,
My guess would be that this is Premiere Elements, which DOES have a watermark applied, when used in the trial version. If this guess is correct, then this PrE FAQ Entry should be helpful: http://forums.adobe.com/thread/433730?tstart=30
As the OP has found, just adding the S/N, to convert from trial mode to full-paid mode, when one has an existing Project, done in the trial mode, will not remove the watermark from THAT Project - Removal of the Render Files is also required. Also, see Reply #8 for clarification from Adobe: http://forums.adobe.com/message/4797656#4797656
If the Timeline has been Exported (Shared, or Publish+Share in later versions of PrE), there is no way to remove the watermark from that output file. Also, one DOES need to Delete those Render Files, from the Project, to then output the Timeline without the watermark.
Hope that this helps, and you might want to Move this thread to the PrE Forum.
Hunt

Similar Messages

  • Trial version banner

    Will the adobe photoshop trial version banner be on my finished product?

    Is there a watermark?  That's news to me.  Have you actually seen this?
    If you do have an embedded watermark, then simply save your work and open in another app like Media viewer, to see if it is still there.
    But I thought trial versuions were fully funtioning for a limited period.

  • Adobe Premiere Trial version "banner"

    How do you remove the banner from a completed video product?
    I downloaded the 30-day trial version and the "banner" runs right through the video I edited.

    nealeh
    The statement that you excerpted from the Adobe's Premiere Elements 12 tryout page
    Trial limitations
    Due to licenses of various codecs, a watermark is displayed on all videos in the preview window and will be added to all exported files. If you decide to purchase Adobe Premiere Elements 12 after the tiral period, the watermarking will be disabled once you enter a valid serial number.
    is so "liberally" written that a "supposed to" is hard to discern, let alone for what the Adobe watermark may be removed from as well as how you do it.
    A while back when another user and myself reported the "automatic removal of the Adobe watermark" after the program was purchased, we were looked on as "unusual".
    Fortunately, there is enough written in Premiere Elements forums here and elsewhere to clarify the situation for liberally written documents.
    I think that we agree in principle on this.
    Thanks.
    ATR

  • Downloaded CS5 Trial version, photoshop doesn't work

    I just downloaded the trial version of CS5.  All the applications open and work except photoshop.  When you open it it states "Some of the application components are missing from the application directory, please reinstall the application".  If I un-install it, how do I reinstall it from the download.
    I had CS2 installed and working just fine, then all of a sudden it would no longer open correctly.  I uninstaled it and reinstalled several times before deciding to try CS5.

    The reinstall process is the same as install and is described here :-
    http://kb2.adobe.com/cps/825/cpsid_82596.html
    Did you run the installer and see any errors?

  • "Created with Adobe Premiere Trial Version" banner on my project

    I downloaded the Premiere Pro trial and I completed my project but I don't want to export it because of a banner through the middle of all my clips.
    Will that banner be there when I export?
    Thanks.

    Never ever seen any Adobe watermarks.
    Is this a new thing?

  • Difficulty with Trial version of Premiere Elements 7

    Before taking the leap to purchase this software and finally say goodbye to MS movie maker (no love lost), I’m trying to edit my first video using the trial of Elements 7.
    I’m having the following issues that I’m not sure is an issue with my machine, the install, or me.
    After laying photo stills to begin the movie, I can no longer add video to a/v track 1 (it simply doesn’t let the video drop there in the Timeline), I’m forced to use track 3 – audio track 2 had audio over the photos. If I try to drag it to Video 1, it simply puts it up to Video 4 or 5. What would prevent video from being added to an earlier track? 
    No PIP – when I drop video on top of other video, it tries to do the Videomerge, but I want the PIP option that I thought should be there when dragging video on top of another clip.
    Performance is miserable in the viewer. Granted I’m using Sony AVCHD which creates large files, but I find myself watching the video in the Sony viewer before editing it because of how choppy it is. I’ve got a dual core 3ghz machine with 4 gb or RAM, with little else running. ..I know I still have to stop some Vista services, but I was wondering if the poor rendering is common.
    I’ve had the software crash several times on me already while manipulating the AVCHD tracks. Has anyone else had this?
    Sorry if this has all been covered, my searching didn’t uncover any of these answers, and I wasn’t sure if any of this was because of the trial version I’m using. Speaking of which, if I make the whole video in trial mode, then buy the software, will it simply remove that trial version banner across the middle of the video?
    Thanks!!
    Brian

    Okay, sounds like a simple matter of trying to jump to the HD video editting before my technoloogy is ready .  I don't have the blu-ray player/burner yet, but was hoping to edit my movies in the HD format and eventually choose the HD output when I'm ready.  I've been making progress on my test movie, but its been frustratingly slow with the crashes and choppy rendering so I don't think I'll continue with the higher def source.
    My exact machine settings are: AMD 64x2 dual core 6000+ 3Ghz with 3GB of RAM (I was off by 1gb before).  I'm running 32 bit Vista, and am using a Hitachi 456gb scsi hard drive (not sure of the speed unfortunately - never really had to worry about it before this).  I have external drives that I use for backups, but not for hot usage.
    I'll try the HDV approach - thanks a lot for the suggestions on that and the trial banner.  I'm hoping the HDV runs smoother then an ice cold one with the big man and his VP.
    Any idea about the problems with the track difficulties and lack of PIP features??
    Thanks again!
    Brian

  • Trial version of elements have question

    Hello. After trying to load premiere elements 8 on my old pentium 4 machine and not working, I tried loading Premeier elements 7 trial version and it works fine. I have one question. The trial version banner is covering my screen when I'm watching videos. Can I take it off?
    Thanks Gib

    You're most welcome. We'll be interested in seeing the details on your laptop, and also what you find with Event Viewer. It is most likely that you will have a bunch of error and warning messages, just before the BSOD. Some will just have useless code, but some should have links. Hopefully, a few of those links will unlock the mystery of exactly what is happening to cause your BSOD. Do follow all links, but know that some might also be useless code. Do not ignore any of the error, or warning messages and patiently read all info contained within.
    One likely culprit for the BSOD is a major driver conflict, though that is just one of possible causes. There are many, many more possibilities.
    Hunt

  • Still have the "Created with Adobe premiere .. trial versions" even after purchasing premiere E 12

    I had decided to use the trial version of PE 12 to see if I'd like it before buying it.  I used it on a previous project that I had started with a previous version of PE (version 9).  After few days, I decided to buy it.
    I did, entered the serial number, signed in etc... Now I still have this "Created with Adobe Premiere ...trial version" banner all over the images and video clips?  You'd think that Adobe woulld automatically remove this now that I purchased the the program.
    Anyone can help me with this?
    Thanks.

    LGT
    When you say that you still have the Adobe watermark on your images and video clips, are you specifically talking about those images and video clips within a given project (project.prel file) OR are you referring to exports from the tryout product (file saved to hard drive or burn to disc)?
    The Adobe watermark cannot be removed from an export of the Premiere Elements tryout. It can be removed from a project.prel file created in the tryout version. I have found it is an automatic process although some have reported the classical fix worked for them, that being, deleting the rendered files. If you were dealing with your issue at a project.prel level, did that deletion of the rendered files work for you?
    If not, this brings up a possibily interesting twist in this FAQ since you are working with a project.prel created in another version before it was opened in Premiere Elements 12. I have always looked at a project.prel created in the tryout not one created in another version and opened in the later version.
    We will be looking forward to your results.
    a. Premiere Elements 12 Expert workspace Timeline Menu/Delete rendered files
    or
    b. Going to the Adobe Premiere Elements Preview Files Folder and deleting the rendered files there.
    ATR

  • I purchased Photoshop elements and it downloaded in Pc and I have a mac.  I downloaded the trial version of mac and put in my serial number but it doesn't recognize it.  what to do.

    I purchased Photoshop elements and it downloaded in Pc and I have a mac.  I downloaded the trial version of mac and put in my serial number but it doesn't recognize it.  what to do.?

    Get a refund from where you bought and buy the correct version

  • Lightroom 4 download button for the trial version of Lightroom 4 doesn't work

    the download button for the trial version of Lightroom 4 at https://www.adobe.com/cfusion/tdrc/index doesn't seem to work
    I have tried this on my pc and laptop both running windows 7

    leahmanzari wrote:
    Not working for me either - anybody out there listening???
    This is a user to user forum, Leah - you get whatever help you get, and be in no doubt, the problem is at your end.
    This question comes up about once every day (despite the fact that there's a fully functioning forum search facility), and the solution of using a different browser usually works fine - have you actually tried that?
    Also, ensure javascript is enabled, and turn off pop-up blockers.
    If none of these work, try downloading from Softpedia or similar.

  • FCP X Trial version - Contour Design Shuttle Pro 2 doesn't work

    I use an iMac with OS X 10.8.4 and the trial version of FCP X, which expires in a few days.
    I simply cannot get my shuttle - which worked perfectly with FCP Express - to work with FCP X.
    I uninstalled and installed v3.0 several times, it is there (I can see it in the preferences and the buttons react), but FCP doesn't react at all.
    I tried settings "Final Cut Pro X" and "Final Cut Pro X alt"
    I also tried to connect the shuttle directly to the computer, via connector on the keyboard and via hub - nothing works.
    I am at a loss.
    Would anybody please help?
    Thanks a lot from Mannheim, Germany
    Sir Torsten

    Hi Torsten,
    there's a seperate driver setting for the demo version which works fine on my system.
    You find it at forums.contourdesign.com/viewtopic.php?f=9&t=3478
    Greeting from Hessen
    ZobRombie

  • I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no c

    I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no customer support for this. I can't believe what a poor service company Adobe is!!

    The problem was that you migrated CS6. Unfortunately, migration doesn't work because it doesn't move all the files.
    First, you'll need to use the Adobe Cleaner Tool to remove the components that were installed:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Second, you should install a clean copy of CS6. Here is a link:
    Other downloads

  • Trial Version of elements 13 running on latest IMac 27 inch.  Move the mouse and it is time out.  Doesn't matter where on the window the mouse is. The program does not respond quickly at all. Takes ages to do anything with it.  Any suggestions?

    I am running a trial version of Elements 13 on the latest IMac 27 inch.  Any move of the mouse and it is time out.  Doesn't matter if the mouse is trying to do an edit or just moving across the window.  The program does not respond very well at all.  I am wondering now if I should bother purchasing the program. 

    How much ram do you have? Did you recently import a bunch of photos into the organizer? PSE will be slow till it's through cataloguing them, which can take some time for large number of images.

  • Hi, I am trying to download the trial version of photoshop but it is stuck on 42% (has been for several hours). I have tried refreshing but it doesn't work. I am using Yosemite OS X.

    Hi, I am trying to download the trial version of photoshop but it is stuck on 42% (has been for several hours). I have tried refreshing but it doesn't work. I am using Yosemite OSX 10.10.3. Any suggestions?

    Re: creative cloud hangs at 42%

  • Lr4 trial version doesn't open on my Mac Pro?

    Lr4 trial version doesn't open on my Mac Pro? Error message: (com.apple.installer.pagecontroller error -1.). Any ideas are appreciated.

    Try running an Apple software update on your Mac.
    See http://forums.adobe.com/thread/1081486

Maybe you are looking for