Trial version of PE10 fails on startup with error:  Elements 10 Organizer\mc_codecs\mc_demux_mp2_ds

Downloaded and installed PE 10 onto new computer (Win7 Pro 64bit I72600K 16GB Ram). Did backup of PE6 on old computer moved backup to new computer and imported. Everything went fine until it hit this error. Now it hits the error immediately at start up. I can use the shift key and start in catalog mode and swithed to a different catalog. Then it starts ok but none of my 30,000 plus images are in the new catalog.
Elements 10 Organizer\mc_codecs\mc_demux_mp2_ds.ax seems to be the culprit.
Any ideas?
Log Name:      Application
Source:        Application Error
Date:          2/19/2012 10:51:55 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Steve-Desktop
Description:
Faulting application name: PhotoshopElementsOrganizer.exe, version: 10.0.0.0, time stamp: 0x4e70d150
Faulting module name: mc_demux_mp2_ds.ax, version: 8.5.0.53657, time stamp: 0x4e2f897f
Exception code: 0xc0000005
Fault offset: 0x000ef2da
Faulting process id: 0x12c4
Faulting application start time: 0x01ccef2f2a064b9b
Faulting application path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe
Faulting module path: C:\Program Files (x86)\Adobe\Elements 10 Organizer\mc_codecs\mc_demux_mp2_ds.ax
Report Id: 6902c94a-5b22-11e1-9972-5404a6d93422
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-02-19T17:51:55.000000000Z" />
    <EventRecordID>5675</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Steve-Desktop</Computer>
    <Security />
  </System>
  <EventData>
    <Data>PhotoshopElementsOrganizer.exe</Data>
    <Data>10.0.0.0</Data>
    <Data>4e70d150</Data>
    <Data>mc_demux_mp2_ds.ax</Data>
    <Data>8.5.0.53657</Data>
    <Data>4e2f897f</Data>
    <Data>c0000005</Data>
    <Data>000ef2da</Data>
    <Data>12c4</Data>
    <Data>01ccef2f2a064b9b</Data>
    <Data>C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe</Data>
    <Data>C:\Program Files (x86)\Adobe\Elements 10 Organizer\mc_codecs\mc_demux_mp2_ds.ax</Data>
    <Data>6902c94a-5b22-11e1-9972-5404a6d93422</Data>
  </EventData>
</Event>

Hi Steve,
I am moving your query to the Photoshop Elements forum.
Thanks,
Preran

Similar Messages

  • BI Server fails on startup with error

    Installed Oracle BI 10.1.3.4.1 on RH5.4 64 bit
    Installation completd succesfully.
    When I am trying to startup BI Server got the following erorr in nqsserver.out.log file
    terminate called without an active exception
    BI server fails to start.
    Please help.
    Thank you
    Michael
    Edited by: Michael Elkin on Jul 2, 2012 1:39 AM

    The problem was with /etc/hosts file.
    The value that is returned by the hostname command should appear in /etc/hosts file otherwise BI Server fails to start with the above error
    Michael

  • I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • PSE13 trial version and it will not work with Windows 7

    I have downloaded PSE13 trial version and it will not work with Windows 7

    I have been using PSE 13 for 3 months with no problems.   When I launch the Editor in PSE 13 this is what I get -
    "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
    RAM 12.0GB
    64 bit operating system
    Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
    Windows 7 SP1
    Hope this helps.
    Lynne

  • Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

    My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
    {CE3119AD-35EF-41CF-9C21-C7698FEB8393}    2013-10-14 21:53:00:256-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 4 updates.
    {EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}    2013-10-15 04:15:54:069-0700    1    162    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Download    Download succeeded.
    {77DAE88F-2795-4258-8BBF-8D27E53662CF}    2013-10-15 12:10:38:196-0700    1    193    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems (KB2862330)
    {1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}    2013-10-15 12:15:25:676-0700    1    183    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
    {A220898A-E5FE-4FE7-8413-2B0C7B4013D0}    2013-10-15 12:15:25:766-0700    1    202    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Reboot completed.
    {A5400FF2-33ED-4A47-8409-13E5DFE16A6D}    2013-10-15 19:29:31:486-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {43C533EE-775D-445E-A652-06648B72DE65}    2013-10-15 19:29:49:702-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}    2013-10-15 19:30:05:744-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 3 updates.
    {4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}    2013-10-15 19:30:08:753-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {51248882-41AC-4E59-B813-87AD326310AD}    2013-10-15 20:00:05:044-0700    1    183    101    {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}    501    0    wusa    Success    Content Install    Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
    {FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}    2013-10-16 00:11:39:832-0700    1    148    101    {00000000-0000-0000-0000-000000000000}    0    c8000247    AutomaticUpdates    Failure    Software Synchronization    Windows Update Client failed to detect with error 0xc8000247.
    Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
    (1) Checked Setting,  set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
    (2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
    (3) Ran MS FIXIT
    (4) Ran System File checker Scan (sfc /scannow)
    (5) Ran CHKDSK /F
    (6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
    (7) Ran Update for Windows 7 for x64-based Systems (KB971033)
    None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
    Any help or guidance is appreciated.
    Solved!
    Go to Solution.

    The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
    The End!

  • Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

    Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

    The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names.  This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
    for this DNS name exisits in the DNS database.  Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
    service on this computer is restarted.

  • Tried to download trial version of Photoshop CC and got an error message A12E5 what does it mean and what should I do.

    Tried to download trial version of Photoshop CC and got an error message A12E5 what does it mean and what should I do.

    All in order now bought the programme and all seem to be working now
    Kind Regards
    Evelyn Gibson FPSSA, EFIAP, EPSSA(Mille), APSSA(Vers), ARPS.
    <Removed by Moderator>

  • ITunes fails to install with error Ox800736FD. Any ideas?

    iTunes fails to install with error Ox800736FD. Any ideas?
    Trying to install on a Acer Aspire-- no CD/DVD

    Ox800736FD
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

  • ORA-39083: Object type TRIGGER failed to create with error:

    i m getting these two error when i import data using impdp.
    ORA-39083: Object type TRIGGER failed to create with error:
    ORA-00942: table or view does not exist
    i have exported (expdp) data from production db, when i importing (impdp) the dump file to the test db i m geting the above two errors.
    example:
    ORA-39083: Object type TRIGGER failed to create with error:
    ORA-00942: table or view does not exist
    Failing sql is:
    CREATE TRIGGER "NEEDLE"."CC_BCK_TRG" BEFORE INSERT OR UPDATE
    ON NIIL.cc_bck_mgmt REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW
    DECLARE
    w_date DATE;
    w_user VARCHAR2(10);
    BEGIN
    SELECT USER,SYSDATE INTO w_user,w_date FROM DUAL;
    IF INSERTING THEN
    :NEW.cretuser :=w_user;
    :NEW.cretdate :=w_date;
    END IF;
    IF UPDATING THEN
    :NEW.modiuser :=w_user;
    :NEW.modidate :=w_date;
    END IF;
    END;
    status of the above trigger in pro db is valid. and source table also exist even though i m getting error when i import
    please suggest me...

    perhaps you don't have table... (impdp created trigger before create table)
    check about "NIIL.cc_bck_mgmt" table.
    and then create it (trigger) manual ;)
    Good Luck.

  • How to Download Trial Version of SAP ERP 6.0 with Oracle?

    HI all,
                 Kindly help out how i can able to download SAP ERP 6.0 or Netweaver trial dump with oracle database in SAP Support portal.
    Awaiting for your valuable reply.
    Regard
    M.L.Gopinath

    Check if the Free Download Catalog has the trial version of PI7.0: http://www.sdn.sap.com/irj/scn/downloads
    Regards,
    Abhishek.

  • Firefox fails to startup, with no error message whatsoever, after installing the Fireftp add-on.

    Firefox fails to startup on OS X 10.6.4, after I install the FireFTP plugin. There's no crash message or anything, just a bouncing icon on the dock and then nothing happens. Creating a new profile solves the issue until i install FireFTP, which again produces the same effect.

    Hi Anselmo_MSW!
    It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time. 
    The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer.  Please follow these steps for isolating and resetting the printer:
    1.  Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
    2.  Make sure all ink tanks are seated properly.
    3.  Make sure all packing materials have been removed.
    4.  Make sure no paper is jammed in the printer.
    5.  Disconnect the printer cable from the printer.
    6.  Close the front cover and turn the printer off.
    7.  Unplug the printer from the power source, and then plug it back in after five minutes.
    8.  Power on the printer.
    If the error returns, the printer will require service options.  I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers.  What I would recommend is contacting a Canon Representative using the following link to learn of your service options.  Contact Us.

  • Smc fails to start with error 'CriticalStopException: String index out of r

    hello all,
    I am having problems with smc (solaris management console), it fails to startup, the initial smc logo appears with smc 2.1.. then juste diapers with the following on the xterm window:
    smc
    java.lang.NullPointerException
    at java.util.Hashtable.put(Hashtable.java:396)
    at java.util.Properties.setProperty(Properties.java:128)
    at java.lang.System.setProperty(System.java:701)
    at com.sun.management.viperimpl.util.security.SMCSSLConfig.setup(SMCSSLConfig.java:158)
    at
    com.sun.management.viperimpl.console.BaseConsoleOptionsManager.init(BaseConsoleOptionsManager.java:188)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.ja167)
    at
    com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:873)
    Java Accessibility Bridge for GNOME loaded.
    com.sun.management.viper.CriticalStopException: String index out of range: -2
    at com.sun.management.viperimpl.console.gui.SMCConsole.start(SMCConsole.java:280)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(BaseConsoleOptionsManager.java1)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsole(BaseConsoleOptionsManageava:660)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.ja176)
    at
    com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:873)
    #

    Hmm, even after backing out the suggested patch it still fails for me.
    Any other suggestions out there?
    --mike
    # patchrm 119060-39
    Validating patches...
    Loading patches installed on the system...
    Done!
    Checking patches that you specified for removal.
    Done!
    Approved patches will be removed in this order:
    119060-39
    Checking installed patches...
    Backing out patch 119060-39...
    Patch 119060-39 has been backed out.
    # smc
    java.lang.NullPointerException
    at java.util.Hashtable.put(Hashtable.java:396)
    at java.util.Properties.setProperty(Properties.java:128)
    at java.lang.System.setProperty(System.java:701)
    at com.sun.management.viperimpl.util.security.SMCSSLConfig.setup(SMCSSLConfig.java:158)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.init(BaseConsoleOptionsManager.java:188)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.java:167)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:873)
    Java Accessibility Bridge for GNOME loaded.
    #

  • Messages fail in PI with error "Message ID already exists in database"

    Hi Guru's,
    The scenario is from FILE->PI->MDM .
    Few messages fail in PI with the error Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database .
    I have already seen the SAP NOTE : 1361305 , My doubt is if this error is any way related to MDM side issue or anything else.
    Please help me out .
    Attached the full trace in PI :
    MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.I_XI_ID_MAP_ID1) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]

    Hi Gowtham,
    Can you check once whether message gets failed after it is automatically restarted.
    Check traces for each defined pipeline.
    I think, at first message got failed due to some reason (i forgot the reason for my case) and when it automatically restart it fails saying message id already exist. Check the root cause why it failed for the first time.
    Also check with basis team on tablespace issue.
    Regards
    Jitender

  • DBcheck get failed from db13 with error BR0301E SQL error -1031

    Hi,
    I am executing DBcheck from db13 but it gets failed with error "BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement".
    Here is the job logs:
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000424, user ID SVKM_BASIS2)
    Execute logical command BRCONNECT On host svkmeccdbci
    Parameters: -u / -jid CHECK20110930103211 -c -f check
    BR0801I BRCONNECT 7.00 (40)
    BR0477I Oracle pfile /oracle/SEP/102_64/dbs/initSEP.ora created from spfile /oracle/SEP/102_64/dbs/spfileSEP.ora
    BR0805I Start of BRCONNECT processing: cegwudvg.chk 2011-09-30 10.32.12
    BR0484I BRCONNECT log file: /oracle/SEP/sapcheck/cegwudvg.chk
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.12
    BR0813I Schema owners found in database SEP:
    DBSNMP, DIP, OPS$ORASEP, OPS$SAPSERVICESEP, OPS$SEPADM, ORACLE_OCM, OUTLN, SAPSR3*, SYS, SYSTEM,
    TSMSYS
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.20
    BR0814I Number of tables in schema of owner SAPSR3: 77207
    BR0836I Number of info cube tables found for owner SAPSR3: 49
    BR0814I Number of tables/partitions in schema of owner SYS: 625/189
    BR0814I Number of tables/partitions in schema of owner SYSTEM: 134/27
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.29
    BR0815I Number of indexes in schema of owner SAPSR3: 92099
    BR0815I Number of indexes/partitions in schema ofowner SYS: 678/199
    BR0815I Number of indexes/partitions in schema ofowner SYSTEM: 175/32
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
    BR0816I Number of segments in schema of owner DBSNMP: 25
    BR0816I Number of segments in schema of owner OPS$SEPADM: 1
    BR0816I Number of segments in schema of owner OUTLN: 9
    BR0816I Number of segments/LOBs in schema of owner SAPSR3: 174072/2383
    BR0816I Number of segments/LOBs in schema of owner SYS: 1838/87
    BR0816I Number of segments/LOBs in schema of owner SYSTEM: 353/22
    BR0816I Number of segments in schema of owner TSMSYS: 4
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
    BR0961I Number of conditions found in DBCHECKORA:118
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
    BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
    'PREPARE stmt_5 STATEMENT FROM'
    'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDE
    ORA-01031: insufficient privileges
    BR0806I End of BRCONNECT processing: cegwudvg.chk2011-09-30 10.32.52
    BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
    BR0804I BRCONNECT terminated with errors
    External program terminated with exit code 3
    BRCONNECT returned error status E
    Job finished
    Please help.
    Thanks in advanced.
    Ocean

    Dear,
    Thanks for the reply.
    I have checked the note you have mention, but it show it is for SAP Release 6.20 or lower.
    we have ECC6 EHP4 release 700.
    So, please advise, should i go for that note and perform the required action ?
    Thanks.

  • Exchange 2013 : OWA failing after login with error "HTTPS 400"

    Greetings,
    I am in phase of Upgrading my existing Exchange 2007 Infra to Exchange 2013.
    The environment is as mentioned below:
    4 Mailbox Server (DAG)
    4 CAS Servers (NLB)
    Everything has been configured and working properly, except Only one CAS server is able to pass the login request
    https://servername/owa
    Rest of all the CAS servers are failing with error "HTTPS 400" while accessing OWA
    https://localhost/owa
    Its happening only while accessing OWA, ECP works fine.
    Please let me know the fix to counter this strange issue.
    Thanks in advance.
    Regards

    Hi,
    Please check if IIS log is enabled on the CAS server, if not, please enable it.
    Then check the detailed error code from IIS logs (Path: inetpub\logs\Logfiles\W3SVC1 ) , some code like 400.1, 400.2 ect.
    Refer to this KB for more details
    http://support.microsoft.com/kb/943891
    After that, please post the OWA related login entry with error code shows 400.
    Thanks for your time and patience.
    Meanwhile, please check the OWA authentication method by command
    Get-OWAVirtualDirectory –Server “Ex2013 CAS server” | fl *authentication*
    We should set the authentication as the below:
    Get-OWAvirtualdirectory -Server “Ex2013_CAS_server” | set-OWAvirtualdirectory -windowsAuthentication $False -BasicAuthentication $True -FormsAuthentication $True
    Then perform iisreset and try to access OWA again.
    Best Regards.

Maybe you are looking for

  • "Arrange by..." options are greyed out in Finder's List View.

    Hey there, just a quick one... I'm having trouble arranging my files/folders by Name, Date Modified, Size etc when in List View. This is fine in my regular Finder window but I clearly remember being able to do when (for example) Saving, Opening and a

  • Idoc processing - determine Basic Type in Program

    Hi Forums, I would like to determine the Basic type that is being processed by at the time of my Idoc creation. the function module I am using is being called by shipping document as well as delivery documents. I would like my code only to be execute

  • Dropbox and Indesign CS5

    Hi I have a dropbox account on my imac and that is where I save, edit and control everything.  I also have a mac book air also with Adobe CS5 on.  However on my mac book air, I log on to dropbox via the web and download files that I need.  What is ha

  • Sound system completely not working

    Dear Sir, I have a HP Pavilion g6 Notebook PC running Windows 8 Single Language 64-bit, Serial no: [Personal Information Removed]. All of a suuden a few days back when I opened the system I found sound system not functioning at all. I cannot hear any

  • Best way to organize several versions of Photoshop Elements to conserve disk space?

    I have Elements 9, 11, and now Version 12. I am wondering if I should import into Version 12's Organizer all of my previous photo files, then delete or uninstall the older versions of PhotoShop Elements? Currently running Windows 7 - 64 bit with late