Trial Version of Workflow Builder

Can somone point me to the link where I can download the trial workflow builder s/w?

Workflow Builder download

Similar Messages

  • Diff: Version on workflow builder and Maintain Active Plan version on SWU3

    Group,
    Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
    Thanks in advance !
    Richard A

    Dear Richard Antony,
    The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
    Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
    Like wise there is lots of importance of versioning Workflow.
    The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
    Hope this will give you a clear picture.
    Regards,
    Chandrashekhar.

  • Error install trial version of Flash Builder 4 in WIN runs on VMWare

    After the installation, I go the errors... please help! Thanks.
    In the Setup dialog, I chose c:\Program Files\Adobe as the install location.
    Why did it try to access vmware-host\Shared Folders?
    ERROR: 14921 Unable to create directory "\\vmware-host\Shared Folders\Documents\..\Adobe Flash Builder 4
    ERROR: 14921 Command ARKCreateDirectoryCommand failed.
    ERROR: 14921 Unable to delete directory "\\vmware-host\Shared Folders\Documents\..\Adobe Flash Builder 4". Error 2 The system cannot find the file specified.
    ERROR: 14921 Error rolling back command ARKCreateDirectoryCommand
    ERROR: 14919 Unable to delete file copy at "C:\Program Files\Adobe\Adobe Flash Builder 4\configuration\config.ini" Error 3 The system cannot find the path specified.
    ERROR: 14919 Error rolling back command ARKMoveFileCommand
    ERROR: 14918 Unable to delete directory "C:\Program Files\Adobe\Adobe Flash Builder 4\configuration". Error 2 The system cannot find the file specified.
    ERROR: 14918 Error rolling back command ARKCreateDirectoryCommand
    ERROR: 14856 Unable to delete file copy at "C:\Program Files\Adobe\Adobe Flash Builder 4\AMT\application.xml" Error 3 The system cannot find the path specified.
    ERROR: 14856 Error rolling back command ARKMoveFileCommand
    ERROR: 14855 Unable to delete file copy at "C:\Program Files\Adobe\Adobe Flash Builder 4\AMT\application.sif" Error 3 The system cannot find the path specified.
    ERROR: 14855 Error rolling back command ARKMoveFileCommand
    ERROR: 14854 Unable to delete directory "C:\Program Files\Adobe\Adobe Flash Builder 4\AMT". Error 2 The system cannot find the file specified.
    ERROR: 14854 Error rolling back command ARKCreateDirectoryCommand
    ERROR: 23 Deleting Registry Key - failure. Error 5
    ERROR: 4 Unable to delete file copy at "C:\Program Files\Adobe\Adobe Flash Builder 4\FlashBuilder.exe" Error 3 The system cannot find the path specified.
    ERROR: 4 Error rolling back command ARKMoveFileCommand
    ERROR: 3 Unable to delete file copy at "C:\Program Files\Adobe\Adobe Flash Builder 4\artifacts.xml" Error 3 The system cannot find the path specified.
    ERROR: 3 Error rolling back command ARKMoveFileCommand
    ERROR: 2 Unable to delete file copy at "C:\Program Files\Adobe\Adobe Flash Builder 4\.eclipseproduct" Error 3 The system cannot find the path specified.
    ERROR: 2 Error rolling back command ARKMoveFileCommand
    ERROR: 1 Unable to delete directory "C:\Program Files\Adobe\Adobe Flash Builder 4". Error 2 The system cannot find the file specified.
    ERROR: 1 Error rolling back command ARKCreateDirectoryCommand
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe Flash Builder: Install failed

    Hi,
    Looks as if you have your home folder on VMWare mapped back to the host OS drive, and that's triggering the initial failure in the log you posted. There's a faulty assumption in our installer's home folder logic that you've encountered, where it thinks your home folder is one level above your Documents folder, though we know that's not always true.
    Here's a workaround you could try:
    - Back up your Documents folder for safe keeping (\\vmware-host\Shared Folders\Documents)
    - create a new folder tree named \\vmware-host\Shared Folders\home\Documents. The folder in the middle doesn't need to be named "home", you can call it anything you want, but there needs to be a new folder in the middle. Make sure you have write access to that home folder, as well as to its Documents subfolder.
    - in VMWare Windows, reconfigure your User settings, moving your "My Documents" location down to the one created below \home\.
    That last step varies a little, depending on which version of Windows you're running. On Win7 you can do it this way:
    - in your user home folder (\Users\yourUserName) locate the My Documents icon, and right-click it
    - choose Properties
    - in the "Location" tab, click Move, and then choose the \\vmware-host\Shared Folders\home\Documents fodler you created earlier on your VMWare host
    On Vista, you can right-click the Documents icon in your Start Menu, choose Properties, and from there on it's about the same as on Win7.
    On WinXP it looks slightly different:
    - right-click your My Documents icon (often on the desktop for convenience), and select Properties
    - the tab you want is named "Target" on WinXP, and then you can click Move to relocate it to the same location described earlier.
    After moving your Documents location this way, I would reboot first, and then make sure any old copies of FB4 are completely removed before re-installing. I just tested this out on my own VMWare machine (Vista), and it worked here, so with any luck it will work there too.
    Let me know how it goes,
    -Chris
    P.S. We'll be fixing this problem in the next release, but can only offer this workaround for now. Thanks for bearing with us.

  • Purchasing Extension Builder 2.1 After Trying the Trial Version: Must I Re-Install?

    A few months ago, I installed the trial version of Extension Builder 2.1. The trial has expired.
    So i went to buy a license. I got back a serial number.
    I assumed that the Extension Builder would include some activiation dialog in which I would enter the serial number and continue on my merry way. Couldn't find it.
    From the wording on the site, it would appear that I need to re-download and re-install Extensino Builder 2.1. That take a long time and I've esperienced probelms installing it in the past.
    Is there a way to enter the serial number instead of reinstalling?
    TIA,
    mlavie

    No. They are different builds.

  • Cold Fusion/Flex Application Wizard crippled in Trial Version?

    Hi,
    I am using the 60 Day trial version of Flex Builder
    3/Eclipse.
    I wanted to try out the much vaunted Cold Fusion/Flex
    Application Wizard, mainly because I could not get my head around
    access from Flex to an existing CFC from the documentation alone.
    So, I followed the directions:
    Click the plus sign (+).
    In the Name: text box, enter the name for the page.
    Select the page type (master, detail, or master/detail).
    Click Edit Master Form or Edit Detail Form, depending on the
    type of form you are creating.
    The Visual Query Builder starts.
    But for me, when I click on 'Edit Master Form' the Visual
    Query Builder does not start.
    Now I have checked and confirmed that my RDS is working, and
    that I can access the database via RDS in the Eclipse RDS browser
    window. The RDS concerned is on another PC.
    The PC on which Flex Builder is installed is a Vista
    Ultimate/32 and the database is MS SQl server 2005 (running on the
    other PC). Cold Fusion 8 is installed on both PC's.
    So, my question is 'Is the CF/Flex Application wizard
    deliberately hobbled/crippled in Flex 3 Trial version, or is there
    something wrong with my installation.?
    If this works for everyone else, then how do I debug my
    installation ?
    Thanks,
    Bryn Parrott

    in addition, I can say that I installed the same flex builder
    trial on an XP machine, using its own local RDS, and found that the
    wizard worked just fine.
    So what is the variable here, why is the wizard not working
    on the vista PC ?
    Is it Vista ?
    Is it the fact that I'm trying to use RDS against a remote
    server and not the local one ?

  • Downloading Web Intelligence Trial version

    Hi Experts,
        I want to learn Web Intelligence and Universe Builder. Please let me know Where I will get Web Intelligence Trial version and Universe Builder..
        Thanks for your support in advance.
    Thanks & Regards,
    Shiva

    Hi,
    If you have service account, you can contact your account manager or your sales representative for Business Object Enterprise download and other information.
    If you want to have an exclusive free trial through a trimmed version fo Enterprise, use "SAP BusinessObjects Edge BI 3.1" installable from the below link:-
    http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    Edge would give you both webi and Universe Designer for you to start.
    Cheers.

  • What is the build version for Sharepoint 2013 Server including trial version there is one?

    Hello Community
        When using WS2012 and Sharepoint 2013 Server, what
    build version for a Sharepoint 2013 Server farm should
    be applied and where do you get the cumulative update
    for it (trial version also if there is one)?
        Thank you
        Shabeaut

    Hi,
    According to your description, my understanding is that you want to know which SharePoint build version should be applied to Windows Server 2012 and where to get cumulative update.
    If you want to use SharePoint in Windows Server 2012, you can use the RTM version 15.0.4420.1017.
    For CU update and build version, I suggest you can refer the detailed article below:
    SharePoint 2013 Build Numbers
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Flash Builder 4 Premium reverts to trial version for SDK 4.5.1.

    My setup:
    Windows 7 and Mac OS X 10.6
    Flash Builder 4 Premium, Version 4.0 (build 272416), volume license
    SDK 4.5.1, Flex 3 compatibility mode enabled
    RIATest 4.3 Professional
    RIATest compiled-in agent: RIATestAgent3.swc
    When running RIATest against our application to perform automated tests, I eventually get this alert appearing in  our application:
    |                                                                |
    |----------------------------------------------------------------|
    |                                                                |
    |    License not present. With the trial version only limited    |
    |    replays are allowed.                                        |
    |                                                                |
    |                            [  OK  ]                            |
    This alert never appeared until we upgraded from SDK 3.4.1 to SDK 4.5.1. This problem occurs on Windows 7 and Mac OS X. I updated our code to disable Flex 3 compatibility and use the RIATest agent, RIATestAgent4.swc. This did not change the outcome. Since this is an Adobe licensing issue, there is nothing the makers of RIATest (Cogitek) can do to help me other than to tell me to press the matter with Adobe. I'm using the same legitimate/legal/valid Flash Builder Premium and RIATest licenses as I've been using for a year now.
    Why do I need a new license to perform automated tests against SDK 4.5.1? What license would that be?

    In order for you to downgrade you need to hava an AVL license, and yes it is possible, you just need to call support.
    http://www.adobe.com/volume-licensing/policies.html
    Check Backward licensing policy
    "Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA.
    Note: This policy is applicable under the TLP and Forms Licensing Program (FLP) as well."
    Hope it helps!

  • License not present.  With the trial version only limited replays are allowed -- Flex builder 4.5 Premium eclipse plugin with SDK 3.5

    Hi ,
    We are using Flex SDK 3.5 and using eclipse to build the war in order to make it automation compatible , Right now we tried with Premium version of Flex Builder 4.5 eclipse plugging to build and make application automation capable. But we are facing issues in terms of license , After deploying the automation compatible build we are getting error message "License not present.  With the trial version only limited replays are allowed".
    Previously we are using Flex Builder 4.0 and everything was working fine .
    Is Flex Builder 4.5 doesn't support SDK 3.5 ?
    Please help .
    Thanks in advance
    Thanks and Regards
    Sunil Kumar

    with trial version (FB basic) you can record/replay only 30
    script lines. You need to buy FB pro license to remove this
    restriction

  • CS Extension Builder 1.5 trial version is now live

    All,
    today we launched the trial version of CS Extension Builder 1.5 on Adobe.com. The trial version is fully functional and will expire on November 1, 2011. Here is the relevant blogpost. Anyone with an AdobeID can download, use it and enjoy the benefits of rapid extension development. You can find more info at CS Extension Builder Developer Center and also in the Trial FAQ.
    Download CS Extension Builder 1.5 trial
    gabriel tavridis
    Product Manager
    @gtavridis

    Thanks for the feedback Harbs,
    Yeah I couldnt agree with you more on the open source aspect. Maybe well get some form of AIR support on linux for those of use who develop on linux as well (doubt it comes back with Adobe driving the train)  who knows what the future holds.. GOD KNOWS IM SICK OF CYGWIN... 
    All I'm saying is we cant build a business around uncertainty.
    We recently signed up for business catalyst, I would of like'd to see some Actionscript API's for that... (I Love how muse and the dreamweaver extensions are using  them but it seem they forget to package some up for us. I guess they really do expect us to use html5 for everything.)
    They are close to releasing Flash builder 4.6 but Creative Suite Extension Builder hasnt been updated...  Theres a lot of things getting left out...
    There seems to be no communication.  Amidst all that goodness that has drawn us to using Flash and Adobe AIR for our game development theres a lot of confusion.
    And take it from me and save yourself some time and dont call customer service I have found more info over the forums in two minutes then I did in four hours of phone conversation.
    I think we may just hold off on purchasing anything else until they sort through the storm.
    Consider we are currently developing our apps with  Business Catalyst, CS5.5 Web Premium, Flash Media Server,  CS Extension Builder, and there new flash 3d API's  we dont have time or money to waste on such foolishness..
    Someone needs to remind Adobe that they make software, They focus so much on the end users, THEY ARE NOT YOUR CUSTOMERS.. DESIGNERS AND DEVELOPERS ARE.. JUST EQUIP US WITH THE BEST TOOLS AND WELL MAKE THE DECISION...

  • I can not reinstall flash builder 4.5 for php trial version?

    My trial version stopped working so i was told by a member of adobe staff to uninstall and reinstall it again and it would still continue my trial. I have 45 days left on my trial. But now when i go to reinstall it i get the erro 'you should eject the disk image'. Can anybody help me get my trial back?

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

  • CC package built & deployed but only trial versions available

    I am trying to build and deploy CC packages for 4 members of a team, I have built & deployed 1 package but the apps are trial versions, first thing i want to do is change trial versions to the full versions we are paying for.
    Forgive me but i need a really basic step by step "how to", i am a photographer not an IT specialist.

    Hi Paul,
    If you have created package using "Serial number workflow" then you can fix it by creating "License file" using Creative Cloud Packager.
    Creative Cloud Help | Create license file
    Hope this helps.
    Regards,
    Sumit Singh

  • Acrobat XI Pro loads as trial version, not registered version, after MB & CPU swap, it is registered

    I have been a registered user of Acrobat since version 3.01. Never had a problem until now!
    The CPU on my MB died last month so I had to replace the CPU, MB (and I upgraded the memory).
    When I rebooted the new system (with my existing hard drive) Acrobat XI Pro now shows up as a trial version. Not regsitered, which it does show up as on the the Adobe website.
    What should I do?

    Thank You
    I am not PC illiterate, been building them there thangs fer nigh on 25 years.
    I don’t know how you could have responded within 2 minutes, unless your last name is Adobe.
    I was just afraid to try in case it got me into deeper water.
    Suspecting that you might be a member of the Adobe team or a very loyal Adobe fan (to have responded so quickly) I went for it.
    As you knew, yes it worked but I don’t feel foolish, sometime the better part of valor…, etc.
    Thanks a lot.
    Jeff

  • PSE 8.0 (Mac) Trial Version, no selection for Slideshow.

    I select photos in Bridge then click on Create, there appears to be selections for Web Photo Gallery and for PDF Slideshow but no selection for plain ordinary Slideshow. Did Adobe eliminate the plain jane Slideshow from this version?
    Regards,
    Bob

    Thanks Barbara, I will go to the Hands On Training Room at the Green Valley Camera Club and use one of the Vista machines to build my lesson plan. Hopefully that version will have a basic Slideshow selection. When I saw the new PSE Version 8.0 for the Mac I thought it would be the one to use to teach the new class next week, so I installed the Trial version.
    Our club is very active and has just installed PSE ver 8.0 on all six of the Vista machines and the instructors console. In case you want to have a look at us, our web site is: www.gvcameraclub.org
    Our membership oscillates between 1,000 and 1,200 members. Right now we have 120 signed up for our 10-week Photography Basics Course.
    Thank you again for your prompt reply,
    Bob

  • Installing SAP NW 7.01 ABAP Trial Version for dummies

    Hello sappers...
    Sorry if you thought this was a guide for dummies, though it could turn out to be if I get some help - I'm the dummy!
    Not wanting to be left out, I too have had a host of issues trying to install this, over several days now... it feels like bashing your head against a brickwall.  After staying up till 4am last night, then wiping my laptop and reinstalling Windows AGAIN to start from scratch this morning, and encountering the cranio-mural interface again, I feel like a crash test dummy!
    I am installing on a new installation of Windows Vista Home Basic, I have a gig of RAM and plenty of hard drive space.
    Forgive me if this is an ignorant question, but do I need to install the Loopback adaptor if I'm connected to the internet?  If it's to generate an IP address, surely my computer has one.  Note networking is not my strong point (though I'm an ok programmer - one project manager even gave me 4 out of 10!) - please be kind!  Anyway, I have tried with and without this on my various attempts.
    ANYWAY.... the sorry saga goes like this...
    I seem to be able to install Max DB OR SAP NW 7.01 ABAP Trial Version u2013> NSP, but not both at the same time - I may have done once, and it seemed to work once, I even managed to sign on - then it wouldnt work in the morning - but then that was on Windows XP Pro on my wife's laptop which only has 500 meg of RAM.
    My last attempt was fairly typical - Max DB is showing up in the program menu, but SAP NW 7.01 ABAP Trial Version u2013> NSP is not.
    However, I seem to have managed to start the NSP server ok, using SAP Management console, thanks to a handy tip on this forum about using your Windows OS password when it prompts for credentials.
    When I try to sign on I get 'partner 127.0.0.1:sapdp00 not reached WSAECONNREFUSED: Connection refused - error number 10061, return code -10, system call connect.
    That's one of my better attempts.
    Last night having deleted all the installed files from my C drive, uninstalled everything, tinkered with the registry to remove all relevant entries, I managed to run an installation that skipped out installing MaxDB (it was super quick!), yet did install the SAP NW 7.01 ABAP Trial Version u2013> NSP bits in my program menu - imagine my excitement at being able to start and stop the server, yet with no database it produced red windows on my screen saying 'sorry, you screwed up AGAIN' (or words to that effect).  Trying to sign on produced equally disheartening error messages...
    Am going to give it another try after taking a break, next time WITH loop back adaptor installed...
    Please pardon lack of relevant detail, I didnt note everything I did on every attempt - substituting humour for detail is all that's saving my sanity at this stage...
    Anyone that can help me achieve this will be my friend for ever... I'm a contractor bitten by the recession trying to learn some news skills.... the first one being how to install Netweaver at home...!
    Log text gives
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Mar 4, 2009 12:51:11 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:11 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    ok, this is the log from my latest attempt...
    > Subprocess starts at 20090312182156
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182159
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182205
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\NSP\db dbm_version
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    VERSION    = 7.7.06
    BUILD      = DBMServer 7.7.06   Build 007-123-197-046
    OS         = WIN32
    INSTROOT   = C:\sapdb\NSP\db
    LOGON      = True
    CODE       = UTF8
    SWAP       = full
    UNICODE    = YES
    INSTANCE   = (unknown)
    SYSNAME    = Windows
    MASKING    = YES
    REPLYTREATMENT = none,zlib,auto
    SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182210
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182212
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182213
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182213
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182228
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'
    > Subprocess starts at 20090312182303
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182304
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182304
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182305
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182306
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182316
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'

Maybe you are looking for