Trial won't work!?  any suggestions??

Hi everyone. So excited to check out the CS3, I installed
Dreamweaver, Flash, & Illustrator. When I go to start them, I
get "problem was encountered while trying to load the trial period
for adobe ...". I even did a clean-install to try to fix it, but to
no avail.
Any suggestions? I would appreciate any help you can offer.
Thanks,
adam
los angeles

This is a user-to-user forum. Adobe's reading of these posts
is
unpredictable. If you need to communicate directly with
Adobe, please
contact them directly.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mikey D." <[email protected]> wrote in
message
news:f1veh5$iko$[email protected]..
> There are many posts on this issue. Search for "CS3 and
Trial". You'll
> find a
> handful of posts asking why?
>
> I'm having the same problem. Trial period has ended, it
says.
>
> Adobe has yet to respond to me or any of the other
posts. I guess the
> only
> real way to get there attention is to blast this topic
up to about 30
> threads
> or so.
>
> Or we could just ask... Adobe will you please post a
fix? It will help me
> make up my mind on whether or not to buy an upgrade or
not!
>
> Thanks,
> Mikey D.
> also from Los Angeles
>
>

Similar Messages

  • Frustrated my computer says flashplayer is installed and enabled but it won't work, any suggestions?

    Really frustrated with flashplayer.  The latest update won't work.  It is installed and enabled but anywhere I go to watch something that uses flashplayer it says I need to install it!

    http://forums.adobe.com/thread/1195540

  • My ipod home button has pushed in to far and now won't work, any suggestions in how to get it back up or should I take it to the apple store?

    Most the photos/music/memos are memories I'd like to keep but if I took it into the store would they wipe it?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - Make sure yo backup the iPod before.
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Just downloaded to new maverick now my program Flipbook pro for mac won't work any suggestions

    Just downloaded Maverick, Now Software FLipbook Pro for Mac wont work anyone out there have suggestions

    https://discussions.apple.com/message/23501395#23501395
    https://discussions.apple.com/thread/5491199

  • I have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks

    i have problem with firefox , it wont loud , the dose not come up , and it frizzes ? i even re-install the program but it wont work:( any suggestion would be helpful , thanks
    i cant login anywhere as all my passwords are saved in firefox, i cant even access teh firefox preference to get my password, it's so sad

    You likley have a corrupted Firefox preference or other support file in your User/Library folder.
    Programs load these files from the user account to adjust to user specifications, instead of having multiple copies of the same program on the machine.
    So when you reinstalled Firefox, it reinstalled the progrma only and the user support files remained from before.
    To prove this point, use System Preferences to create another Admin account and log into it, Firefox should run like a charm.
    To remove the Firefox support files from the problem user account your going to need to locate these files and delete them one at a time and try FF again and again.
    The first one you shoull try is your FF .plist file located in your User/Library folder.
    Clicm on the Finder and use the Go > Go to Folder and paste this
    ~/Library/Preferences
    and press Go.
    Now scroll down until you see the Firefox or Mozilla .plist file and Trash it, quit and restart Firefox, it will recreate the preference file with default settings you will have to reset it.
    Next run through the list of fixes #1-13 here before proceeding.
    https://discussions.apple.com/docs/DOC-3353
    If you need help deleting other FF files, download the free Easy Find from MacUpdate.com and search for anything "Mozilla" or "Firefox" in your User account only and take your chances you hopefully won't delete your password file in the process.
    You should have site passwords written down someplace and locked up tightin case you need them, a computer isn't totally safe and reliable.

  • HT201077 I'm trying to photo stream, but my ICloud Isn't working, any suggestions?

    I'm trying to use my photo stream on my Icloud but it isn't working, any suggestions?

    What part isn't working? The download? The install? Do you see an error message? Are you downloading a trial version, or did you pay for it?
    Please post more details, and someone may be able to help you.
    Matt

  • Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

  • Spilled liquid on MacBook Pro - won't start - any suggestions?

    spilled liquid on MacBook Pro - won't start - any suggestions?

    Thank you both for your responses! I watched a video on how to remove the hard drive - special tork(?) screwdriver and too many steps for me to feel confident about doing it myself, so I took the computer to an Apple Store - and thank God, the hard drive appeared undamaged - they are transferring the data to a new Macbook Pro. The loss of data was the scariest part, so I am breathing again!
    The laptop was three years old, I was hoping for another year or so before upgrading, but such is life. I appreciate your upfront advice.

  • Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

    Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

    Hey NicolasZen,
    Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    Your iPhone may have one of these symptoms:
    - iPhone displays "No Service" or "Searching" in an area of good coverage
    - iPhone doesn't regain service when returning to an area of coverage
    Resolution
    If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
    1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    2. Turn iPhone off and then on again.
    3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
    4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
    5. Update your iPhone to the latest version of iOS.
    6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    7. Restore the iPhone.
    Thanks,
    Matt M.

  • Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

    Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

    If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • Unable to download the trail version of Photoshop CC.it says retry! however, the retry option is not working.any suggestion?

    unable to download the trail version of Photoshop CC.it says retry! however, the retry option is not working.any suggestion?

    Urban baul for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • Vmfusion problem: i am running 10.8.5 trying to run 10.6 on vmfusion but its not working any suggestions/help?

    i am running 10.8.5 trying to run 10.6 on vmfusion but its not working any suggestions/help? i get this same error

    hummingbird.jeff wrote:
    Hi Agan:
    Yes indeed ddanielsun is encountering  the same problem that led me to initiate this thread ... If you try to install any of the available 10.9.x from 10.6.8 the installer exits with an error "10.9 required for this update" ... seems strange that 10.9 is so very hard to find ! ! !
    jeff
    Clearly you can not update 10.9 if you do not have 10.9
    It is very easy to find, it is in the App Store as the picture I posted earlier displays. Follow the same instructions. If you can't then use THIS LINK which will take you there.
    The current version of 10.9 is 10.9.5 and that is what you will get.

  • The return button on my macbook is not working, any suggestions?

    the return button on my macbook is not working, any suggestions?

    By the way, if you are still interested, I found a solution. It's a bit crazy, but basically I have insulated the parts of the keyboard connector corresponding to the power button using some thin tape and then used a very thin wire going from the logicboard (where the test pads for startup are located) to my eject key, this way the original power button does not respond anymore and the eject key can be used as the power button, just like in the new Airs
    I can provide photos if you want.

  • When i charge my ipod it works but as soon as i take it out the charger it doesnt work any suggestion on how to make it work?

    When i charge my ipod it workd but as soon as i take it out the charger it doesnt work any suggestion on how to make it work?

    It may need a new battery, take it to an Apple Store and check.

  • After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • HT4528 my podcast app is shutting down after a few seconds iv tried to reinstall several times but nothing is working even after the podcast update last week im still having no luck getting it working any suggestions?

    my podcast app is shutting down after a few seconds iv tried to reinstall several times but nothing is working even after the podcast update last week im still having no luck getting it working any suggestions?

    if you are subscribed to the Hardwell podcast... quickly open the Podcast app and delete the most recent Hardwell podcast from 3/22.
    for some reason that's causing the crash. i've deleted and it works fine again.

Maybe you are looking for

  • Event date

    When importing or moving photos the event date and the photo date are the date of import, not the date taken.  I created a new library and imported a few photos; they had the correct date.  Now what do I do?

  • OSB - Looking for howto's on multi machine message delivery.

    Hi. I am very new to Oracle Service Bus. I want to setup two machines, A and B. I want A to take service calls from BPEL, deliver them to B and have B deliver them to their final service, returning the reply back to A and finally BPEL. The communicat

  • Transfer Dataset

    Hi all, I have declared an internal table in the following way. tyeps: begin of tys_sample,           a(9),           b(9),           end of tys_sample. data: gt_sample type standard table of tys_sample,         gs_sample type tys_sample. made some o

  • How to set glasspane in Jpanel?

    I want to block all mouse/key input in JPanel, so how to set glasspane in jpanel?

  • Performace Tuning for BSIS table

    Hi All,   While selection of data from BSIS table , data is not comming in production server it is giving dump for time out. So I have changed the code for peformance. I made a secondary idex ZCF and given field MANDT,BUKRS,HKONT, GJAHR,BUDAT and MON