Trials Fusion Multiplayer Madness!

In case you don't know, RedLynx have recently added an online multiplayer mode to Trials Fusion and it's rather fun. It's even more fun in private games with altered settings. If you want to play, either add me (Jacko_the_lad) or QuietlyWrong and we'll invite you when we're about to start. So, join us on Wednesdays at 8PM for some insane low gravity races whilst riding an invisible bike that's on fire.

mattsimmo wrote:
Great laugh as always
Shall put a few clips together. Hopefully got your pose Kermit It felt epic. Especially when I managed to land it as well.

Similar Messages

Access to Test/Trial Fusion CRM Cloud Environment

Hi , I am Siebel Developer from past 8 years. I want to learn Fusion CRM now by myself. How can I get trial access or some test environment access where I can get my hands dirty.

Virtually impossible for now. It should be available mid next year.

Trial version limitations -- no audio?

Does premiere elements trial version have some limitation on file size / audio ? I converted an avi of about 1gb to iphone format using trial version, and there's no audio in it , although I can view it on iphone just fine.
Another problem I faced with trial was that the app interface sometimes freezes. I tried converting an mpeg of about 600 MB to iphone format, the interface suddenly froze inbetween. The conversion was happening in background: I could see the converted file growing in size. I left it on overnight and next morning, theUI was still stuck at same place, even though the file was all converted and I could view it in itunes.

The only limitation on the trial is the "Made in PrE Trial" banner on Export/Share. Otherwise, it is exactly the same as the full-paid version.
Now, there could be limitations with either your system, or with your Assets and Project Preset. This ARTICLE will give you tips on the types of info that can be very useful.
Can you tell us about your system - full details, including things like your HDD's, their size, format type, speed, free space and how allocated.
Please tell us more about your source files. AVI, MPEG, MOV, etc., are but wrappers, and can contain all sorts of "stuff." this ARTICLE will give you more background.
Then, can you give us the full details of all of your Export/Share settings? Be sure to give details on all aspects (tabs), including Multiplexing.
Screen-caps can be very useful for this, as it will save you a lot of typing.
Good luck,
Hunt

Dowloaded trial version 2 and lost 1.5

When i downloaded the trial version it made me re name the original aperture file to down load version 2.0 Problem is it now not allowing me to open up the old one. Does this mean all my images in the old one are gone

You are correct in saying that Aperture 1.5 will not open the 2.0 library, all of the readmes and warnings make this VERY clear when you are installing the trial version.
Do you now have two libraries, one your original 1.5 library and a new 2.0 library?
If so you can launch the old 1.5 library by double clicking on the library itself, or option clicking Aperture 1.5 when you launch it, this allows you to choose the library that you want to open.
If you did not follow the advice contained in the installation guide and readme and now only have one library that has been updated to a 2.0 library, you have no choice but to go and shell out the dollars for the upgrade, well worth IMHO.
ave a read of the readme that came with the trial version and it will explain all.

Trial Version of Cp7

I get the message saying my project will expire because of the trial which is awesome...I think you put that in there with Cp6 and it's great that people know that it will expire and when.
My question is...as long as I get the full (or upgrade) version by the end of that date and republish the project, I will still be able to use it, correct?
I just want to make sure that anything I create with the trial can be made valid after I get the license key.
Thanks.
Dave

Hi again ,
Yes, you are right, once you license your product, just go to the Preferences -- Start and End and [uncheck] the expiration option.
Republish the project and all the projects you created within the trial duration would work for you, even after the expiration date you saw earlier.
Thanks,
Anjaneai

Licensing issues with Trial version?

I'm trying to make changes to a pre-existing Flash file that
I got from someone else. I only have an educational version of
Flash, and I know there are licensing problems with using that for
commercial use...but what about if I downloaded the trial version
and made changes to the file with that?

1)
unable to populate database values at speak List in flash Builder4.6 The fallowing code is used
<fx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   private function getIteamCategory():void {
   avar sqlConnection:SQLConnection = new SQLConnection();
var resultSet:SQLResult = null ;
var dataList:ArrayCollection = new ArrayCollection();
sqlConnection.open(File.applicationStorageDirectory.resolvePath("IDatabase.db"));
var stmt:SQLStatement = new SQLStatement();
stmt.sqlConnection = sqlConnection;
   stmt.text="SELECT item_category FROM Menu_Table where item_id between 1 and 99";
stmt.execute();
data_list.dataProvider=new ArrayCollection(stmt.getResult().data);
   sqlConnection.close();
return dataList;
        protected function datalist _creationCompleteHandler (event:FlexEvent):void //executed when the List completes loading
            getIteamCategory ();
]]>
<b/fx:Script>
<s:List id="datalist" x="10" y="10" left="0" right="0" top="0" bottom="0" width="1004"
        height="500"
        creationComplete="datalist _creationCompleteHandler(event)" enabled="true">
    <s:itemRenderer>
        <fx:Component>
            <s:MobileItemRenderer label = "{data. item_category }"/> // The Application is a mobile app
        </fx:Component>
    </s:itemRenderer>
</s:List>
Please suggest, I also included mx.swc file in the build path. Also seeing following several error message, pasting two of them
1120: Access of undefined property ContainerBorderSkin.
1172: Definition mx.skins.spark:ButtonSkin could not be found.          NewIndianCurryHous
Thanks in advance.

Dreamweaver 9 Trial

Does anyone else wonder when the trials will be made
available for us to actully try out these fantastic new features
which are being promised ?

Steve Fleischer wrote:
> I presume they'll be available when the actual products
start shipping
> which, I understand, will be the end of April.
Don't hold your breath.
http://www.adobe.com/support/
"Creative Suite 3 trials
" * We expect trial availability of Adobe Creative Suite 3
suite
editions and component products to be within 6-8 weeks of the
product
shipping."
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Activate VM's which have been marked Stopped after trial period is finished and pay pr. use has been activated on account

In the free trial period I made several VM's whuch now have the status Stopped.
I updated my account to "Pay as you go" but I'm not able to activate the VM's that have been stopped.
How do I activate the Stopped VM's?

Hi,
Please try to start the Virtual Machine through Powershell and check if you are able to start them.
You may refer following link for a PS command on starting Azure VM:
http://www.jonathanagardner.com/start-and-stop-azure-vms-with-powershell/
Regards,
Manu Rekhar
Disclaimer: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found
on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions
you to make sure that you completely understand the risk before retrieving any software from the Internet.

Dreamweaver CS3 trial

Does anyone know if the CS3 trial is still lurking anywhere?
I'm basically at my folks' for a week, and was hoping to do a
little bit of work while I was here - but the laptop is back with
my wife.
But all I can find is the CS4 trials, which aren't available
yet.....
So might I be stuck between the CS3 trials having been made
unavailable, whilst the CS4 trials haven't been made available
yet....?

Yes you might

CE1 7.2 vs NW 7.02 Trial

Hi,
It's possible integrate NW 7.02 trial with CE1 7.2 trial ?
I made the steps for integration but I can't done with sucess.
Anyone know if this is possible or some tips/tricks.
Best Regards,
Rodrigo Silveira

Hi Pradeep,
Tks for your information!
Can you send me please the steps for this?
Regards
Rodrigo

After Effects cs4 does not recognise my legal product key

I changed my hard disk without deactivate After Effects cs4
Trying to install it again several times received the message "some components did no installed correctly" and prompt me to run in a trial basis
I made all the updates and still have the same problem
Any Help ???

Contact Adobe Customer Support.

Grid with File Preview in Acrobat X Pro

In the previous version of Acrobat 9 Pro -- there was a layout call Grid with File Preview. We use it as our primary layout for PDF portfolios, but in version 10 Pro -- I cannot find this layout anywhere.
Does anyone have a clue as to where I can set it to this layout? I have contacted Adobe Technical Support and they were unable to help me with the problem and another forum had users mentioning the same question, but never was resolved.
I would appreciate any productive feedback.

I was also lost when we upgraded to Acrobat X. I work for lawyers, and they always reviewed document productions (usually thousands of PDF files) using Acrobat 8. They didn't like the flying cards so we stopped using Acrobat X for file review. Also my portfolios bogged down so slow that it was impossible to quickly view the thousands of PDF files I'd previously packaged in Acrobat and indexed for searching. IT upgraded us 3 weeks before trial which really made my day!!
I just noticed that someone has created a custom NAV layout just like the Grid with File Preview and it's available for free download at http://blog.practicalpdf.com/2012/07/grid-with-file-preview-pdf-portfolio-layout-available -now/. I'm going to try it and hopefully start using Acrobat again.

Pdfs created on my iMac add hidden carriage returns after each word

Hello Community,
This problem exists on my iMac but not my wife's Powerbook.
Whenever I created a pdf from Preview by printing and then selecting "save as pdf" I got a lovely looking pdf which I could send to anyone and they could view just fine. However, if I or anyone else selected text from that pdf and pasted it into any other program, it came out with an exclamation point instead of the space between words which is, needless to say, quite undesirable. Searching around, one thing that was suggested was clearing the font cache so I did this (several times). It did indeed make a difference: now instead of exclamation points a carriage return appears after every word! Once again the pdf looks just fine, but when you copy and paste text from the pdf into any other text program this happens.
So then I downloaded Adobe Acrobat (the one month fully functional trial program) and made pdfs with this program to see if that was the problem but, no, the same thing occurs. So it really seems to be a strange glitch in my iMac and my system?
Any advice would be greatly appreciated.
Best regards,
---Norm

There is no Flash player version 15... as in your code:
<param name="swfversion" value="15.0.0.0" />
For some reason Adobe thought it would be a good idea to target a Flash player version (15) as default.....which may be out a couple years in the future. Go figure!!!
If you don't like player version 9, change to 10 or 11.... just not 15 (yet).
Best wishes,
Adninjastrator

Setting up the HR-PDC interface to ext. system without direct RFC

Hello,
Setting up the HR-PDC interface to external system without direct RFC - Uploading time events
Following note number 647145, I tried to set up connection to external time collection system. As the external system isn't able to work with RFC, I setup a fileport using transaction WE21. When an outbound IDOC is created with transaction PT80, it will be stored at the outbound path. The IDOC then will be transfered to the external system with a unix script triggered by event.
For inbound IDOCS, the fileport cannot be used as I don't see any way to configure it as the time events that should come in via RFC port, will be uploaded and processed according the ALE distribution model. The BOR object "PTManagerExtPEvent" of type "BUS7014" with method "Insert" is used to insert the time events into the interface table CC1TEV from an HR-PDC certified subsystem. The message type is "HRCC1UPTEVEN".
As standard process won't work in our case, I'd need alternative solution. Actually the time events are send via ftp to the SAP directory that points to incoming IDOC path setup on WE21.
Maybe there should some way to setup RFC connection to own SAP system that points to the SAP directory where the inbound files are stored.
Maybe using the FM IDOC_INPUT_HRCC1UPTEVEN can be used to trigger the upload manually but first the files have to be uploaded from file similiar to report RSEINB00. Testing this report using the SAP directory and port where the inbound files are located I get error message that IDOC control record is missing, that seems to be understandable as this report is used to upload IDOCS from file but HR-PDC upload file HRCC1UPTEVEN01 has no specific IDOC segments in this moment as it was created according specific HR-PDC interface description. The IDOC in the standard process will be created with the BAPI.
As I'm new in HR and ALE, I'd be grateful for any help on this matter.
Best regards
Andreas

Hello Andreas,
thanks for Your contribution. Recently I've got the trial version and made some tests and found out that the bapi-handler works perfectly for managing HR-PDC interface.
Nevertheless actually there's no compilation for OS/400 and the AS/400 I'm working with has an old OS release without C compiler and furthermore RFC libraries of SAP cannot be installed on this release.
The Bapi-handler for testing runs on Windows
and I'd need an intermediate machine to manage the data between AS/400 and SAP. I'd prefer direct connection between timecollection subsystem and SAP for obvios reason.
Regards
Andreas

Not able to connect to uplay on xbox one

Hi there,
I seem to have a problem where I can't connect to any ubisoft games on my xbox one. I have both Assassins Creed : Black Flag and Trials Fusion and both constantly say the servers are unavailable. I am able to connect to the uplay app via the xbox one and also the website but no luck at all with the game servers, is this still a widespread issue?
Regards,
Mike.

Hi Mike_f_81,
Welcome to the forum and thanks for posting.
We are not aware of any issues affecting Ubisoft at the moment but send me in your details and I will be in touch.
Click on my username and under the "about me" section you will the link to get in touch with us. Whenever we receive your details we will go from there.
Cheers,
Olga
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Trials Fusion Multiplayer Madness!

Similar Messages

Maybe you are looking for