Triangle on message

In reply to your reply to my question on triangle showing up on some of my messages to people. This has been happening to some messages never all messages just a few and the recipient does recieve the text. But has been happening last couple weeks. Also had to uninstall and reinstall messenger because my alert sound went silent. Tried reseetting with different sound and still did not work after reinstalling itworks for sound but triangle problem still happening
Sent from my Verizon Wireless 4G LTE smartphone

>> Discussion continued from: my verizon messenger <<

Similar Messages

Font Error Message While Editing a PDF File with Acrobat XI Pro

Hello,
I have Acrobat XI Pro running on Windows 8.1
I scanned a PDF File and then went to "Tools - Text Recognition - In This File - Edit - OutPutStyle ClearScan etc etc" and got the file into "Edit Mode".
When I replace a "number/digit", the replacement digit font is "very small" and there is a "Yellow Triangle" error message which says the following.
"The Original Font Fd 3168 is not available or can't be used in editing. Acrobat is using the font "Minion Pro" font in its place.
Anybody know how to overcome this error message/problem OR alternatively how do I change the FONT of the whole page to some other Font?
Also how do I find a "similar or equivalent font" for Fd 3168 font that Adobe Acrobat says, is not available.
TIA

Hi Bill. Thanks for replying.
Unfortunately, I don't have the option of using the original DOCX file. The author lost it, leaving only the pdf around
I'm using AA XI 11.0.06. Upgraded this morning. That's running on Windows 7 Ultimate 64.
I get the boundary boxes by clicking on the 'edit text and images' tool, and they appear. Or don't in this case
I only need to change a few characters in the file. However, even just opening up the file in AA and then saving, the "A = " "text" gets deleted.
Could it perhaps be something to do with embedded or missing maths fonts on my machine? I mean, I don't get any warnings, just can't do anything with the A and AB italic bold text.
Thanks!
-- gyre --

5th gen Ipod won't work on an airplane

Sounds bizzare, but it has happened twice to me in the past 2 weeks. Unit works fine on the ground. Works fine in the plane before we have to shut down all electronic devices. Get above 10K feet, and get the message that it is OK to use electronic devices, and my Ipod will not work. Just keep getting the darn triangle error message. Plane lands - all is fine again.... Pressurization issue, or is my Ipod just possessed?....

Hi Gary,
Welcome to Apple Discussions
Apple's iPod Specs says:
"Maximum operating altitude: 10,000 feet (3000 m)"
I hope that helps,
JonAre You New to Apple Discussions? Do You Want More?
kad: How to Properly Use Apple Discussions
G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz iBook, Macintosh 128K, eMate... Mac OS X (10.4.5) Airport EX, Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

RSS not working in Mail after MobileMe instal

The title pretty much says it all "RSS not working in Mail after MobileMe instal" The names of the RSS feeds are still there but all have the triangle error message beside them.

you may have already tried this but in the mailbox menu at the top, try to take all accounts offline then take them all back online again. if that doesn't work you can always do a rebuild which is kind of a pain, but it usually does the trick.

Copy cells and past as picture in pages

How do I copy some cells that have calculations in them, then paste to Pages? In Excel when you go to paste, you get a menu paste as picture. Them you just get the cells as they look in Numbers. If you paste from Numbers it shows cell layout but the cells that have calculations in them only show a triangle error message. Any one know how to do this.

Hello Badunit
I always get the red triangle when I paste in Pages a table or a piece of table embedding references to cells which aren't in the pasted range.
This why once I asked Apple to make a small change in Numbers:
Replace Paste Values Only by Copy Values Only
With such change,
Copy - Paste in Numbers would not change
Copy - Paste Values Only in Numbers would be replaced by Copy Values Only - Paste in Numbers
Copy - Paste in Pages would not change
Copy Values Only - Paste in Pages would replace the trickery which we must use at this time.
Yvan KOENIG (VALLAURIS, France) mercredi 9 janvier 2011 16:05:53
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

I am having difficulty printing from photoshop.

I set it to "photoshop controls colors", but get a warning, "ColorSync color matching may produce different results than printer color management. Either Photoshop color management or printer color management is recommended." Then the picture prints with these bizarre streaks in it. But, photos print perfectly from Lightroom.

If you having Photoshop manage the print colors did you heed the yellow triangle warning message an turn off and color management in the printer driver settings

Why won't my wireless mouse connect to Bluetooth?

My Bluetooth-operated mouse, which I've been using for at least 6 months, has stopped working on my iMac (2009 version). It simply lost connection from one second to the next, and I haven't been able to reconnect for weeks. (And yes, I put new batteries.) I know the Bluetooth on my computer is fine, because my wireless keyboard and speakers are connected just fine via Bluetooth. I tried turning the mouse off, and then on a few minutes later. I also tried turning off Bluetooth on my computer and then turning it back on in an attempt to "reboot" it. I also tried restarting the entire computer. I also opened Disk Utility to "verify and repair" disk in case there was any damage of some sort that was causing the problem. And when I went to test the mouse itself on a different computer (which is one of the older version iMacs that are plastic white and thick and have a smallish screen), the mouse connected to the Bluetooth there and worked perfectly. It's been very frustrating to use an older mouse with a short cord and the little ball-scrolling-thingie that doesn't work when I scroll down, only up.
When I try connecting the mouse to my iMac, I get one of two results. 1) Up until right before I submitted this question, the Bluetooth settings showed that the mouse "connected" but there's no response on screen when I move the mouse. After 5 or so seconds, it says "disconnected". 2) More recently, when I try pairing the mouse, it doesn't even connect at all anymore. I get the small yellow exclamation-mark-triangle error message, saying it can't connect to my mouse. What can I do, short of buying a new mouse? These wireless mice are too expensive, and I'd really like to resolve the issue with this one.

How to Reset Your Mac's SMC
The method for resetting your Mac's SMC depends on the type of Mac you have. All SMC reset instructions require shutting down your Mac first. If your Mac fails to shut down, try pressing and holding the power button until the Mac shuts down, which usually takes 10 seconds or so.
Mac portables with user-removable batteries (MacBook and most MacBook Pros):
1 Shut down your Mac.
2
3 Disconnect your Mac portable from its MagSafe connector.
4
5 Remove the battery.
6
7 Press and hold the power button for at least 5 seconds.
8
9 Release the power button.
10
11 Re-install the battery.
12
13 Reconnect the MagSafe connector.
14
15 Turn your Mac on.
Mac portables with non-user-removable batteries (MacBook Air and some late 2009 MacBook Pro models):
1 Shut down your Mac.
2
3 Connect the MagSafe power adapter to your Mac and to a power outlet.
4
5 On the built-in keyboard (this will not work from an external keyboard), simultaneously press and hold the left shift, control, and option keys while you press the power button. Release all keys at the same time.
6
7 Press the power button to start your Mac.
Mac desktops (Mac Pro, iMac, Mac mini):
1 Shut down your Mac.
2
3 Unplug your Mac's power cord.
4
5 Press and hold the Mac's power button for 15 seconds.
6
7 Release the power button.
8
9 Reconnect your Mac's power cord.
10
11 Wait five seconds.
12
13 Start your Mac by pressing the power button.
Alternative SMC reset for Mac Pro:
If you have a Mac Pro that isn't responding to the normal SMC reset as described above, you can force a manual SMC reset by using the SMC reset button located on the Mac Pro's motherboard.
1 Shut down your Mac.
2
3 Unplug the Mac's power cord.
4
5 Open the Mac Pro's side access panel.
6
7 Just below the Drive 4 sled and adjacent to the top PCI-e slot is a small button labeled SMC. Press and hold this button for 10 seconds.
8
9 Close the Mac Pro's side door.
10
11 Reconnect your Mac's power cord.
12
13 Wait five seconds.
14
15 Start your Mac by pressing the power button.
Now that you have reset the SMC on your Mac, it should be back to operating as you expect. If the SMC reset didn't fix your problems, you can try combining it with a PRAM reset. Although the PRAM works differently than the SMC, it can, depending on your Mac model, store a few bits of information that the SMC uses.
If you're still having issues, you may wish to try running the Apple Hardware Test to rule out a defective component on your Mac.
Resetting the Parameter RAM
One easy fix for many issues is to simply reset the PRAM to its default state. This will cause some data to be lost, specifically the date, the time, and the startup volume selection. Luckily, you can easily correct these settings using your Mac's System Preferences.
1 Shut down your Mac.
2
3 Turn your Mac back on.
4
5 Immediately press and hold the following keys: command+option+P+R. That's four keys: the command key, the option key, the letter P, and the letter R. You must press and hold these four keys before you see the gray screen during the startup process.
6
7 Continue to hold down the four keys. This is a long process, during which your Mac will restart on its own.
8
9 Finally, when you hear the second startup chime, you can release the keys.
10
11 Your Mac will finish the startup process.
Once your Mac finishes starting, you can use the System Preferences to set the time zone, set the date and time, select the startup volume, and configure any display options you wish to use.
To do this, click the System Preferences icon in the Dock. In the System section of the System Preferences window, click the Date & Time icon to set the time zone, date, and time, and click the Startup Disk icon to select a startup disk. To configure display options, click the Displays icon in the Hardware section of the System Preferences window.
Still having problems? Try resetting the SMC or running the Apple Hardware Test
<Link Edited By Host>

How to produce Sinewave burst

Hi All
I wish to produce a sinewave burst, any suggestions ?
I have attached the waveform I need to produce
Attachments:
New Bitmap Image.jpg ‏74 KB

This is a start. I multiplied a sine wave and triangle.
Message Edited by jcarmody on 04-03-2009 02:10 PM
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
test.vi ‏12 KB
test.png ‏8 KB

Can't address a cell using CountIF function

I've worked on a data set of historical temperature records (4656 in all). I am trying to generate a bell curve graphic. In order to do this I need to establish the range of temperatures, and the frequency of each temperature in that range.
I decided on three columns, Column A (the data set of 4656 entries), Column B (the range of all temperatures found in the data set), and Column C (the frequency of each temperature in the range.
To find the frequency I am using the following flawed formula: =COUNTIF($A$2:$A$4656,"=-4")
My problem is that this only works if I manually insert a particular temperature from the range, like -4° F displayed as the example test criteria "=-4"
There should be a way to reference a relative cell, rather than manual editting each formula. I would expect it to be: =COUNTIF($F$2:$F$4656,=A2)
But that generates a red triangle error message. Any thoughts on how I could do this smarter?

Hello
- 1 - NB.SI is the frenh name of the COUNTIF function.
- 2 - I don't know which version you are using. For the french one arguments are separated by semi-colons while for the US one they must be separated by commas.
Perhaps are you working with an other language.
You will be able to find it in the help searching for the local equivalent of "fonctions statistiques"
You may also send a mail to:
koenig PERIOD yvan AT tele2 PERIOD fr
I will be able to send you the sample file which will be automatically localised when you will open it.
Yvan KOENIG (from FRANCE mercredi 31 octobre 2007 21:22:15)

Section numbers awry

CS3, ID5. Document has two chapters. When I added second chapter to doc, I created new section. In Pages panel, there's a black triangle visible over page 1 of the whole doc (i.e., at start of chap 1), and also on the page that starts chap 2.
Problem is that the RH, which contains Chapter number, has chapter 1 for all pages. I had expected it to pick up the number 2 for the chapter number in the second section.
In the Pages panel, when I hover over the first triangle, the message says "Start of 1" but when I hover over the second, it says "Start of Sect 1." So clearly something is different. But I'm not seeing what: what's causing the difference in section information, and why are all my pages in both sections flagged as chapter 1?
When I double click on the first triangle, hoping to edit it, here's what I see. What's my mistake?

Chapter numbers are different from Section numbers. A single document can have only one chapter number, but multiple doc can all have the same chapter number if you like (so that you can break up a long chapter in a book into logical sections for editing).
You should either use a section marker or prefix, or create a running head variable keyed to a paragraph style applied to the chapter number heading on the page.
Peter

Satellite A20 - CD/DVD doesn't read any kind of disk

I just received a used Satellite A20. Previous owner has uninstalled their programs, and now the DVD/CD does not read any kind of disk. It worked fine for the former owner.
Satellite A20C-0231Q Windows XP - Home Drive SD-R2412
In the bios a cd-rom drive is listed
In the Contol panel the drive is listed but with a yellow triangle and message suggesting that the device cannot be used... driver problem?
Is there a way to locate the driver for an older machine, install it, without doing a complete recover (since the cd drive does not work?)? I noticed that the driver listing started with Satellite A-200.
Any suggestions will be appreciated!
Thanks!

Hi
Normally you dont have to install another driver for CD/DVD drive. The preinstalled driver is a part of OS and must not be renewed or something else.
Anyway, if your drive is listed in device manager with yellow exclamation mark you should remove it and restart the notebook. After this the drive will be recognized again.
If it doesnt work you should follow this Microsoft workaround to remove the upper and lower filters:
http://support.microsoft.com/kb/314060
By the way, can you boot from a bootable disk?

Office Home and Student 2013 error message with yellow triangle

I have been using my word and excel they were working fine. Now there is a yellow triangle top right corner by my initials. I finally got it to show me only for a moment what it means. Error Message: did not realize I should have copied it down but
after error message it said to sign-out and sign back in. I have never had to sign in before the Office was installed in Dec 2013 by Best Buy. All they returned was the card they had used to download. When I tried to click on sign in it does nothing. The error
seems to have the word program very mixed up as it will preform some task but seems to lock me out of other normal things I usually do like spacing or changing font size just to name a few. I already checked for all updates on my computer per your sites suggestions.
How do I make the error message /yellow triangle go away and allow me to use the office home and student 2013 like it was working before. Please help I live alone, and near 60, live in the boondocks, and do not have any computer people within a 4 hour drive
round trip. Thank you

Now there is a yellow triangle top right corner by my initials.
Hi,
As per the description, it looks like an issue with your microsoft account. Does the error message look like below?
ACCOUNT ERROR
Sorry, we can't get to your account right now.
To fix this, please sign in again.
Sign in
You mentioned that "a yellow triangle top right corner by my initials", you probably have already signed in with an acocunt. If you remember this account, I'd suggest you click
File>Account on the tab, click Sign out under
User Information, and then sign-in again. If you don't have this account, you probably need to contact the retailer for it.
If issue persists, please post back with the details of your system environment, then we will take a further look.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, any ideas.

Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, and all resources on computer, any ideas??

Hi
And
• free space on Start-Up hard disk ? How Much ?
• Brand and type of DVD used
• Burn Speed ?
• Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
Yours Bengt W

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

I get an error message when I try to use share function on IPhoto. I get the triangle icon with an exclamation mark inside of it.

I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Triangle on message

Similar Messages

Maybe you are looking for