Trick to Load Data into System Matrix?

Hi,
Is there any possibility to load a system Matrix, see code below:
The code below break at LoadFromDataSource (Not user defined)
Thank You!
Rune
CODE
oForm.DataSources.DataTables.Item("SYS_77").ExecuteQuery("SELECT [U_ItemCode] WHERE [U_MyField1] = 'A' AND [U_MyField2] = 'N'");
( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).Columns.Item("1").DataBind.Bind("SYS_77", "U_ItemCode");
( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).Clear();
( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).LoadFromDataSource();
( ( SAPbouiCOM.Matrix ) ( oForm.Items.Item("77").Specific ) ).AutoResizeColumns();

Hi Petr,
your first option is understood but, will you please explain the second one?
"when is there more lines, create user defined field in lines table, with di api make update of this userdefined field and then make form.update"
I have number of lines to be filled in system matrix and have used only first option, which is unacceptably slow. how can the use defined column's data be transferred to system columns without copying them on cell level as suggested in first option by you?
thanks and regards,
Binita

Similar Messages

Can not load data into the ods.

When I was trying to load data into BW3.5 from R3 system, I am getting this message
"For InfoSource ZSD_A507_011, there is no Hierarchies for master data in source system R3PCLNT300
" any idea. There is no hierarchies for this.

Hello Mat,
What are you trying to load??
If the data source is a hierarchy datasource??
just check this thread
There are no hierarchies for this InfoSource in source system
Thanks
Ajeet

Unable to load data into Planning cube

Hi,
I am trying to load data into a planning cube using a DTP.
But the system throws a message saying that, real time data loading cannot be performed to the planning cube.
What would be the possible reason for the same?
Thanks & Regards,
Surjit P

Hi Surjit,
To load data into cube using DTP, it should be put in loading mode only.
The real time cube behaviour is set to planning mode only when the data is input to the cube via the planning layouts / or through the Fileupload program.
You can change the behaviour of the cube in RSA1 -> Right click on the cube -> Change Real-time load behaviour and select the first option(real time cube can be loaded with data; planning not allowed)
Best Rgds
Shyam
Edited by: Syam K on Mar 14, 2008 7:57 AM
Edited by: Syam K on Mar 14, 2008 7:59 AM

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

Error while loading data into 0pur_c03 using 2lis_02_scl

Hi,
While trying to load data into 0pur_c03 by using Data Source 2lis_02_scl from R/3 the error message "The material 100 does not exist or not active" is being displayed. I have loaded master data for 0Material and performed change Run also.Still the problem is not resolved.Please suggest in resolving this issue.
Regards,
Hari Prasad B.

I have the same problem in my system and i found that the material XXXXX had movements.....sales documents and more but in certain moment it material was deleted in R3 and it is not loaded into 0MATERIAL infoobject because is marked for deletion....
If you have this error must activate the load request manually and your infocube can hold the data without any problem.....
Regards

Error while loading data into cube

hi BW gurus,
when ever i am trying to load data into the cube from flat file after scheduling iam getting short dump in BW system. I checked it in st22 it is giving me a error as exception add_partition_failed. please help me to sort out this problem. If you know the error recovery please give me the answer in detail.
I will assign points for good answers.

This is what the note says:
Symptom
The process of loading transaction data fails because a new partition cannot be added to the F fact table.The loading process terminates with a short dump.
Other terms
RSDU_TABLE_ADD_PARTITION_ORA, RSDU_TABLE_ADD_PARTITION_FAILED, TABART_INCONSITENCY, TSORA, TAORA , CATALOG
Reason and Prerequisites
The possible causes are:
SQL errors when creating the partition
Inconsistencies in the Data Dictionary control tables TAORA and TSORA
Solution
BW 3.0A & BW 3.0B
In the case of SQL errors:Analyze the SQL code in the system log or short dump and if possible, eliminate the cause. The cause is often a disk space problem or lock situations on the database catalog or, less frequently: the partitioning option in the ORACLE database is not installed.
The most common cause of the problem is inconsistencies in the TAORA and TSORA tables. As of Support Package 14 for BW 3.0B/Support Package 8 for BW 3.1C, the TABART_INCONSITENCY exception is issued in this case. The reason is almost always missing entries in TSORA for the tablespaces of the DDIM, DFACT and DODS data classes.
The TAORA table contains the assignment of data classes to data tablespaces and their attributes, for example:
Tablespace Data class
DDIM PSAPDIMD ........
DFACT PSAPFACTD ........
DODS PSAPODSD .......
Foreach data tablespace, the TSORA table must contain an entry for the corresponding index tablespace, for example:
TABSPACE INDSPACE
PSAPDIMD PSAPDIMD
PSAPFACTD PSAPFACTD
PSAPODSD PSAPODSD
In most cases, these entries are missing and have to be added. See also notes 502989 and 46272.

Loading Data into an infobject in BW7.0

I have a master data IOBJ that I am loading data into directly from a datasource. Even though the data loads successfully, No rows are added....
What gives? Thanks

Hi, Irwin
i'm not sure if you got this previous question answered, but in order to tell if you are using a transformation vs. a old transfer rule, next to the "green bow tie" icon, you will see "RSDS" for transformation. For update rules, you will also see the green bow tie but it will have a little square next to it then the name of the target. A blue looking flag will represent the old transfer rules as in 3.x. if you provide your email address, i can send you a screen shot of what each of these look like.
I have had similar issues where I've seen the data loaded to the PSA, and then the DTP runs successfully (green) but no rows have been added - i feel your pain! a couple things to troubleshoot are as follows: 1. make sure the datasource fields look correctly (with the correct template i/o) 2. make sure that the data is formatted correctly - pay special attention to ensure that the data coming in matches what is antipated by the datasource fields tab in regards to internal/external format and 3. try reactivating everything...
I know those are pretty basic steps, but i've encountered this issue a few times and it usually has soemthing to do with the data not being in the correct format. unfortunatly, i have yet to see any helpful messages
from what source system does your datasource come?

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

Loading data into infocube in bi 7.0 from flat file.

Hello All,
I need the complete procedure for loading data into the infocube from flat file in bi 7.0 i.e.using transformation,DTP etc.
Please help me with some gud documents.

Hi Pratighya,
Step by step procedure for loading data from flat file.
1. Create the infoobjects you might need in BI
2. Create your target infoprovider
3. . Create a source system
4. Create a datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process (DTP) from the datasource to the Infoprovider
8. Schedule the infopackage
9. Once succesful, run the DTP
10. This will fill your target.
Hope this helps
Regards
Karthik

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

How to load data into an ods from multiple info sources.

hi all...
i am given a task to load data into an ods from 3 infosources ...
can someone plz give me the flow .
thank u in advance..

Hi Hara Pradhan,
You have to create 3 update rules by giving the 3 different infosources while creating each update rule. And u have to create the infopackages under each infosource. with this u can load the data to the same data target from multiple info sources.
Hope it helps!
Assign points if it helps!

Can i use one interface to load data into 2 different tables

Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AM

Hi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

Error Loading Data into a flat file

I am recieving the following error when loading data into a flat file from a flat file. SQL 2005 is my back end DB. If I cut the file iin half approx 500K rows my ODI interface works fine. Not sure what to look at.. I rebuit the interface which before was just dying giving no error and now I am getting this.
Thanks
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Figured it out, found similar post that stated changing the HEAP size
Increase the page size in odiparams.bat in the bin folder and restart Designer.
For eg:
set ODI_INIT_HEAP=128m
set ODI_MAX_HEAP=1024m

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Trick to Load Data into System Matrix?

Similar Messages

Maybe you are looking for