Trick to mate pic in pic with main video?
hello there,
I frequently shoot video with two cameras, a stationary for whole view and a hand held for close up work. I put the close up shots as picture in picture in the main clip. Is there a trick to mate the shots? I've been setting the clip timing to 2s so that I have greater control of the placement of the close up but i still end up trying to match sounds and specific object motion..
just wondering if there's a better way..
Thanks in advance
Marc
Take a look [at my comments in this post|http://discussions.apple.com/thread.jspa?messageID=13001139�]
I was doing a similar thing but using cutaways instead of PIP but the principle is the same. There are several tips that may help.
Similar Messages
-
Picture in Picture with main video
I have a main video to which I'm adding photos. What is the way I could show main video as Picture in Picture above the added photo and going back to main video in full screen as photo is no longer demonstrating?
Thanks a lot, looking forward for your advice.
Olegthis is the final cut pro 7 forum. You're in the wrong place.
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x -
Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone
That happens because photo stream photos only remain in iCloud for 30 days, even though your last 1000 photo stream photos remain on your devices until deleted. When you enabled photo stream on your iPod 4, you only received photo stream photos from the last 30 days as older photos are no longer in iCloud. If you want to stream these older photos to your new iPod, you will have to create a shared photo stream on your old one that contains these photos (requires iOS 6 or higher) and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99.
-
In trying to edit my pics only the slide show pics is editing - not the main pic. Trying to crop the pic and the whole main screen goes grey
Please check your Firefox Installation's version. (can be found by clicking the main menu, either clicking or hovering over the help button, and then clicking about firefox in the sub menu). depending on how long ago you set up sync you may still be using the older sync version. firefox 29 introduced a new (and might i add far less tedious) sync version. see [[How to update to the new Firefox Sync|this Mozilla support article]] for information on upgrading your sync to the new version.
-
My phone is sharing my pics and contacts with my husbands phone, how do I turn it off
My phone is sharing my pics and contacts with my husbands phone, how do I turn it off
Hi cody176,
Welcome to the Support Communities!
It sounds like you may need to set up a different Apple ID for iCloud so that you can keep your contacts, calendars, messages, etc. separate from your husband's.
The articles below may be able to help you with this issue.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622?viewlocale=en_US
iCloud Help: What is iCloud?
Cheers,
Judy -
IPad will not send pics or imessage with update to 7.1.2
iPad will not send pics or imessage with update to 7.1.2
Hello Catjaj
If you are having issues with sending iMessages on your iPad, then check out the article below for multiple troubleshooting options to get it back working again. You can try deleting the message thread and starting a new one as well as resetting the Network Settings.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
-Norm G. -
How come the pics I take with my iPhone are all turned into jibberish?
Ever since I upgraded the OS on my iPhone 3GS to version 4, I have a weird problem. When I take a picture and try sending it to someone who's on a PC, it asks me "You can reduce message size by scaling the image to one of the sizes below", which it never did before. I then have to choose between small, medium, large, and original. Whichever size I choose, the person who gets the email get nothing but pages after pages of letters, like "AAIAAAGAAAkgEOSSABAEEgn", and so on. I restored my iPhone and copied everything back from my backup, but to no avail. Still the same problem. And I did a test with a video. Same result. If I send the file to someone with a Mac, no problem. By the way, my iPhone has never been jailbroken. Any idea what's going on?
Disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT -
How to make a border around a pic-in-pic?
I use adobe premiere pro cs3. What is tehe best (and hopefully an easy way) to create a border around a pic-in-pic movie. Is it correct that I can't find an option for that? I make this kind of things now by placing the second clip in track video-2 en then changing the size. But there is no option then in wich i can specify the thickness and the color of a border.
Use a color matte on track 2 and your PIP on track 3. Size both to your liking, for instance track 2 sized to 50% and track 3 to 45%. The difference in size determines the border width, the color of the matte is your border color. Start with the color matte using motion/scale/position, then copy and paste attributes to track 3 and scale this further down to create the desired border width.
-
Clueless how to mate the AC3 sound file given me with my video project
Hi gang. This morning I started researching how to do this, but haven't figured it out yet.
My DSLR projct has ben edited on Premiere Pro CS5. I created the project in stereo and once I picture locked, outputted an OMF file to the sound mixer.
He just delievered to me an AC3 file. I've no idea what to do next.
I'd like to mate the AC3 with my video, of course. Do I do that in Premiere Pro? Do I export an uncompressed AVI video file and somehow mate the two together somewhere else?
Clueless here.
(of note: This Friday I am having a screening of three of my short films, including this one. The screener will be on DVD and has to be an auto play DVD, something you can pop into the player, no menus, it just plays and goes from video to video. I created a couple test DVD's in Encore and it worked.)
Heres all the specs for the export:
Name: Dolby Digital Professional 5.1
Description: Dolby Digital 5.1 audio at 448 kbps
File Extension: ac3
Estimated file size: 192.26 MB/hour of source
Segmentation on cluster disabled
Audio Encoder
Format: AC3
Sample Rate: 48.000kHz
Channels: 6
Bits Per Sample: 16
Target System: DVD Video
Data Rate: 448 kbps
Compression Preset: Film Standard
Audio Coding Mode: 3/2 (L, C, R, Ls, Rs)
BitStream Mode: Complete Main
Center Mix Level: -3dB
Surround Mix Level: -3dB
Dolby Surround Mode: None
LFE Exists: Yes
Dialog Normalization: -27 dbFS
Copyright Exists: Yes
Original Content: Yes
Audio Production Information Exists: No
RF Overmodulation Protection: Off
Channel Bandwidth Lowpass Filter: On
DC Highpass Filter: On
LFE Channel Lowpass Filter: On
3dB Attenuation: Off
phase 90: On
Deemphasis: OffExport out a video file. Bring that and the .ac3 file into Encore for DVD authoring.
-
Need help getting advanced tool bar to show up for Pic in Pic in IMovie'11. Have enabled Show Advanced Tools via Preferences, but when try to add clip for Pic in Pic it only adds as regular video clip.
Hi
And You have one Clip in Project window / TimeLine. Then drag and drop the second one ontop of this one and get the fold down menu and can select Pic in Pic ?
OK
Then You know that You only can add one Pic-in-Pic - total !
So if You need two pictures into a back-ground picture - You must do a work around.
IN A NEW PROJECT !
• put in background picture
• Now add first (pic in Pic) picture and size and positioning it right
• Export this as a full quality QuickTime movie .mov
• Import this into Event's
• Put in main project
• Now add second picture
If You need more pic in pics then You need to Export / Import several times till clip is ready to go into the Main Project.
IF IT DOESN'T WORK AT ALL !
The most probably the iMovie pref file got corrupted and needs to be trashed (When iMovie is NOT running).
Yours Bengt W -
Sub Bank accounts mapping with main Bank account
Bank accounts
Hi
How can we will map with main bank account to sub bank accounts.
Example; My main bank account: 1111, and
Sub bank account : 2222 ( Deposit account)
Sub bank account: 3333 (Cheque issue account)
Regards
PVCHi
Bank account- This is the G/L account that you provide at the Housebank level configuration in FBZP.
Sub account - This is the G/L account which you provide in the Bank Determination level in FBZP
Now conceptually there are many transactions which need to be routed through clearing accounts. This is where the sub accounts come handy and are used for clearing purposes. they are open item managed accounts. So clearing is possible. In the end the main bank account tallies with your bank balance and moreover the clearing accounts become zero after all clearing has happened.
Moreover the best way to maintain the G/L in SAP would be
XXXX0 as the Main account
XXXX1 say outgoing checks
XXXX2 say outgoing wires
Hope this clarifies
Rgds -
How to run a simple program with main?
I have a simple class with main, something like the following:
public static void main(String[] args) {
Is it possible to run / execute this main from within workshop?In SP2 we've made it very easy to automatically set the main class name
when you first try to run a class in a Java project that doesn't have
already have debugging configured.
More generalized ways to easily run a class with a main method are
already on the list for the next release.
Thanks for the feedback,
Josh
Carl wrote:
Thanks, that worked:)
Workshop should consider dealing with simple classes with main much
simpler...
"Josh Eckels" <[email protected]> wrote in message
news:3f96f8c1$[email protected]..
Yes, you can run and debug it, but it needs to be in a Java project. If
it's not already in one, create a new Java project and copy in the
source. Go to the Project Properties, and select the Debugger settings.
Enter the class that contains the main method. If you'd like, you can
set the checkbox for Build before Debugging so that you are always
running off the current source code.
You should then be able to run the project after building it.
Josh
Carl wrote:
I have a simple class with main, something like the following:
public static void main(String[] args) {
Is it possible to run / execute this main from within workshop? -
Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.
-
I dont want to the people in the main video to become transpartent (ghostly) I only want that to happen with the copy that I am overlaping. The copy will not be at the same starting point as the original, it will be slightly ahead. Everything ive tried has left the video lighter or darker then the original and it looks weird, it was used with a tripod so nothing changes in the video except for the posiioning of the people. I want to have like a trailing affect following the people, like you can get with your cursor on some computers its like its lagging behind? Its hard to explain, I hope this made some sense.. any suggestions would be great thanks.
Since you are disolving two shots together (rather than compositing or keying) it seems like you will always have some slight noticeable opacity as you are effectively bleinding two shots together at 50% opacity each. There is no way to maintian 100% short of keying or compositing. However with the background being the same in both shots the opacity shift should be very minimal.
Although you might consider trying the built in trailing effect in the filters browser and see how it looks, it might achive the effect you are attempting better than blending the two shots. -
Performance Management: 'Share with Main Appraiser' button not visible
Hi Gurus,
I am using Oracle R12.1.3, Performance Management module.
I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
Would really appreciate any response which might help.
Thanks and Regards,
RahulI'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.
Maybe you are looking for
-
[solved] Yaourt + Pacmatic warning message on system update
I've recently installed Pacmatic and I use Yaourt aswell, so I edited my yaourtrc so that the PacmanBin was pointing to pacmatic. But when I run a 'yaourt -Syu' and there isn't any news, I get the following message: Warning: stale installation, rerun
-
Hi All, I hav an xml coming out of an input stream whose encoding is 'UTF-8'. I have to change it to "ISO-8859-1" and then parse the xml. I was trying to replace the string, but cud not do it. can anyone help me with the code that can replace that pa
-
10.6 Server loginwindow crash
Hi, I have a Mac Pro running Mac OS X Server 10.6.5. It was running fine until today when it crashed while trying to login. Now when I turn the server on I get a blue screen with a mouse for a few seconds and then a black spinning wheel like you see
-
UCCX/CUIC 10.5 - Default filter error when trying to run reports through dashboard
I'm new to CUIC. We just upgraded UCCX to 10.5.1 this past weekend, and I'm working on building a dashboard to replace the old wallboard that was custom written by our integrator previously. When I add the live report for CSQ Detail (example...name
-
i've knocked my bbm off by accident,however i already paid,so when i call orange costumer services to activate it again,it's telling me i need 25 pence to make the call however i dont have 25 pence on my phone as im on pay as you go? what should i do