Trickled daemon no configuration file

I want to use Trickle for maintaining network connections for a specific user account, so that account can not use sites with video streaming as the streaming process would be very slow, but can access simple websites with no problems. But, as far as I know, i need to use trickled daemon to do this, but when i run trickled i get this :
trickled: Skipping configuration file: ${prefix}/etc/trickled.conf: No such file or directory
I set up configuration file from other websites, the program didn't install it itself. I ran 'sudo trickled -c /etc/trickled.conf' but did nothing. Config. file -
[ssh]
Priority = 3
Time-Smoothing = 0.1
Length-Smoothing = 1
[ftp]
Priority = 2
Time-Smoothing = 5
Length-Smoothing = 20
[www]
Priority = 1
Time-Smoothing = 10
Length-Smoothing = 10
Any help?

When you say "it did nothing" do you mean you got your prompt back, like after a successful operation? Have you checked if trickled is running?
After running 'trickled' I can see 'trickled' in htop. I don't know if it's doing its job, but it's there. Running 'trickled -c /etc/trickled.conf' starts 'trickled -c /etc/trickled.conf'.
Last edited by karol (2011-09-19 21:43:07)

Similar Messages

  • Where are configure files for Grid Control components?

    I installed Grid Control 11g on Redhat 5.2, the repository database is Oracle 11.2.0.2 on the same box. It worked after installation, but after some weeks, I restart oms and got error [oracle@cchbi bin]$ ./emctl start oms
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server is not functioning because of the following reason:
    Connection to the repository failed. Verify that the repository connection information provided is correct.Tried to google and search the forum, the message is not very selective and got few relevant resut.
    Hope your exterts can point me to the configure file where I can verify the connetion to repository. Alos some one would share with me the knowledge on the following topics
    1) What are the processes/components of Grid Control ? I am aware of oms, opmn, and a process run as /u01/app/midware/oms11g/ccr/bin/nmz -cron –silent. ANy others? What are their functions?
    2) Location of configure files, log files and binary executables of this processes/components.
    Many thnaks.

    Hi,
    to check if the OMS is running properly execute the command "emctl status oms" ($OMS_HOME/bin).
    The result should be "Oracle Management Server is up".
    To check which components are currently running execute the command "opmnctl status" ($OMS_HOME/opmn/bin).
    The result should be something like:
    Processes in Instance: EnterpriseManager0.<host
    -----------------------------------------------------------+---------
    ias-component | process-type | pid | status
    -----------------------------------------------------------+---------
    DSA | DSA | N/A | Down
    LogLoader | logloaderd | N/A | Down
    HTTP_Server | HTTP_Server | 26470 | Alive
    dcm-daemon | dcm-daemon | 26301 | Alive
    OC4J | home | 1953 | Alive
    OC4J | OC4J_EMPROV | 1954 | Alive
    OC4J | OC4J_EM | 26523 | Alive
    WebCache | WebCache | 27085 | Alive
    WebCache | WebCacheAdmin | 27086 | Alive
    Executing this command will answer your question whioch components need/should be up when using OEM/GC.
    You will find some logfiles of the OMS under $OMS_HOME/sysman/log (e.g. emoms.trc, emoms.log). Please check logfile OC4J~OC4J_EM~default_island~1 under $OMS_HOME/opmn/logs as well...
    To start the OMS you might try the command "opmnctl startall"...
    HTH

  • An OS-Intergrated place to store per-user application configuration files.

    A Chairde,
    I'm developing an application that could be deployed on multiple platforms. I'm looking for a location to store per-user configuration files in a OS-integrated way.
    I use a utility class to determine the OS of the users machine. I know from experience that Windows NT5+ likes to store per-user settings/configurations in the %APPDATA% path (which is usually C:\Users\<username>\Appdata\Roaming\<vendor>\<software> etc.) I'm using a call to the environment labels to determine it's location.
    I'm a linux user myself, so I'm aware that most UNIX based Operating Systems like to store personal configurations in hidden folders in the user's home directory (ex /home/<username>/.<application> etc.), Obviously, I'm using a call to the system property user.home to determine that location.
    My Question is in relation to Mac OS and Mac OS X, where would it be a safe location to store per-user configurations? I know OS X is BSD/UNIX based so is it safe to assume to store them as a hidden subfolder of the user.home directory? What about Mac OS classic? Where are per-user settings stored, or is it like Windows 9x and NT4 and lacks proper multi-user setups (although NT4 is somewhat more prepared then 9x) ?
    It would be much appreciated if anybody has any ideas.
    Is Mise,
    Seán Mac Aodha
    PS. I'm not using Javas Property files etc. I've rolled my own exchangeable format for storing key,value pairs.

    I've used databases in the past to store local files but clients have sometimes run into trouble when the database daemon goes down or doesnt start-up normally because of a "improper" shutdown etc.
    In my own implementation of "Settings Files" i have serialized hashtables marked with appropriate metadata stored to the users "application data", a backup or original copy of those settings in the common directory shared by my application framework and then in a networked enviroment, the Settings can be hosted on a database server, so the user can travel between client machines and keep their settings (and files) with them.
    I have, with a bit of googling, come across the most obvious page i should have looked at in regards to Apple Mac OS X
    http://developer.apple.com/documentation/MacOSX/Conceptual/BPFileSystem/Articles/WhereToPutFiles.html
    According to Apple's guidlines, the most suitable place to store User configuration files is in the ~/Library/Application Support/<Application Name> directory.
    and for System-wide configuration files, /Library/Application Support/<Application Name> rather then storing them with the application in the /Applications directory.

  • Configuration files: ️ /etc/hosts - Count: 44 mean

    I used etrecheck on my laptop because it is very slow and the result is below. what does it mean:
    Configuration files: ℹ️
      /etc/hosts - Count: 44

    EtreCheck version: 2.1.5 (108)
    Report generated 11 January 2015 23:23:35 GMT+3
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 21:23:36
    Disk Information: ℹ️
      APPLE HDD ST500LM012 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.88 GB (252.55 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/hosts - Count: 44
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Toast 11 Titanium/Spin Doctor.app
      [loaded] com.hzsystems.terminus.driver (4) [Support]
      /Applications/Toast 11 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
      /Library/Application Support/VirtualBox
      [loaded] org.virtualbox.kext.VBoxDrv (4.3.16) [Support]
      [loaded] org.virtualbox.kext.VBoxNetAdp (4.3.16) [Support]
      [loaded] org.virtualbox.kext.VBoxNetFlt (4.3.16) [Support]
      [loaded] org.virtualbox.kext.VBoxUSB (4.3.16) [Support]
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) [Support]
    Startup Items: ℹ️
      MobileBrServ: Path: /Library/StartupItems/MobileBrServ
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.adobe.CS5ServiceManager.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [not loaded] org.virtualbox.startup.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.google.GoogleContactSyncAgent.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [running] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
      [not loaded] org.virtualbox.vboxwebsrv.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Google Drive Application (/Applications/Google Drive.app)
      BitTorrent Sync UNKNOWN (missing value)
      AdobeResourceSynchronizer Application (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      Dropbox Application (/Applications/Dropbox.app)
      AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app)
      EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
      MacCaptain [Installed]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Growl  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          8% Contacts
          7% WindowServer
          6% Safari
          4% CVMCompiler
          2% hidd
    Top Processes by Memory: ℹ️
      136 MB Safari
      99 MB Mail
      86 MB AdobeAcrobat
      77 MB mds_stores
      73 MB Finder
    Virtual Memory Information: ℹ️
      523 MB Free RAM
      2.03 GB Active RAM
      593 MB Inactive RAM
      833 MB Wired RAM
      14.81 GB Page-ins
      267 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 11, 2015, 09:17:03 PM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-01-11-211703_[redact ed].cpu_resource.diag [Details]
      Jan 10, 2015, 11:29:22 AM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-10-112922_[reda cted].crash
      Jan 10, 2015, 02:00:53 AM Self test - passed

  • Wireless configuration files

    Hi Guys, I have a question about wireless configuration files. I have set my wireless up and I am able to get it working. To do this I have to enter the iwconfig command manually.
    iwconfig eth2 essid GillisLAN
    When I do that and restart the network it works fine.  I have read the forum and wiki and have tried many of the suggestions I have found in them. I must be missing something because I cannot get any of the config files to set things up for me. I have posted my the network portion of rc.conf below. I would really like to solve this and need some help.
    David
    # NETWORKING
    HOSTNAME="DsLNVO"
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    ###eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    ###eth0="dhcp"
    eth2="dhcp"
    ###wlan_eth2="wlan0 essid GillisLAN"
    ##WLAN_INTERFACES=(wlan0)
    INTERFACES=(lo eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.7.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng ipw3945d network netfs portmap fam dbus hal crond kdm)

    As far as I know, wpa_supplicant can be setup without encryption.
    Here is the Arch wiki page on setting up wpa_supplicant-
    http://wiki.archlinux.org/index.php/Wpa_supplicant
    Also take a look here at the WPA supplicant section in the gentoo handbook. It includes helpful examples of different configurations which the Arch documentation doesn't.
    http://www.gentoo.org/doc/en/handbook/h … art4_chap4

  • Imac is no longer able to open the Configuration file

    Hi ,
    I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
    The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
    My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
    I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
    I tried using the Airport Setup assistant (imac), I received this message:
    "Appropriate Airport hardware was bot found on this computer,if you recently
    Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
    The imac does not have a card, nor do i think it needs one.
    I would like to be able to at least open the configuration file.
    Thank you for reading my post.
    Eme
    Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.4)  

    Hi Kes, a star for the company !
    I made an error on my first post I have a Netopia modem, Airport router.
    And so it remains, i guess that there must be an easy answer somewhere
    that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
    As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
    particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
    Good luck,w/ this Q.
    regards Eme
    Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.5)  

  • No dsn is present in the configuration file in the reporting services 2008

    HI i have found this error in the log file of my reporting services ,
    when i comes to the Configuration file in that
    my DSN path is empty no input code is there in that DSN tags
    <DSN>
    <DSN/>
    it shows the empty tags,
    and my Current Report Server Report Credentials are Windows,Service account credentails
    will it take the problem or what
    We have repair the BIDS setup also still not able to solve my issue.
    once this is  resolved now able to send the emails using subscriptions.
    pls infom abut this , i have sufferd this problem last 20 days.
    Please update the above query with high priority
    TanQ

    Hi Ychinnari,
    According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
    DSN specify the database server that hosts the report server database connection string.  The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
    existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
    Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
    On the Database page, click Change Database.
    We can create a new report server database or select an existing database, then click Next.
    Connect to the instance of the Database Engine that you will use to create and host the report server database.
    Specify properties used to create the database.
    Specify the credentials used by the report server to connect to the report server database.
    Review the information on the Summary page to verify the settings are correct, and then click Next.
    Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
    For detail information about Configure a Report Server Database Connection, please refer to the following document:
    https://msdn.microsoft.com/en-us/library/ms159133.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Configure File Type Associations dosen't work for users

    Hi EB,
    Does anyones knows how to set the File Type Associations for users ? It works for me when i'm logged in as Admin but not as a user. When logged as user it always ask to configure the file associations when i open JDev and even with JDev open it does not set it. I tried to find an article about that but couldn't find any.
    I'm using :
    winXP SP3
    JDeveloper 11g TP4
    and i've sets all rights for autentified users on the folders and subfolders of JDeveloper.
    Thanks

    I tried going on tool>preferences>File Type .... and associate projets and source and applications files with JDev check marking "open with JDev"... it didn't worked as user... it's just not saving my settings while reopening it it's never saved... at least i've been able to associate it in my Admin account then i can go back in user account and select open file with in windows, choose JDev and check mark "always open that file with that program" only after that the association is saved in JDev... but still it open the Configuration file windows at startup with the ones i already opened with JDev checked... anyway that's not a big issue ... only that i can't save those settings by the JDev environement while logged in as a user...

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

    Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

    Boot the MBP with the OPTION+COMMAND+R keys down.  The result should be a display showing a revolving globe.  By following the instructions, you will be able to reinstall the original OSX.  Then you may reinstall Yosemite.
    A solid Internet connection will be required.
    Ciao.

  • Reading Encrypted Password from Configuration File and Decrypt it at login

    Hi All,
    My application reads a configuration file to connect to the ORACLE database. The values defined for password are clear text as given below:
    user: 'mh'
    password='abcd1234'
    Is there is any way I can give an encrypted password in the configuration file instead of a clear text file and at the time of login ORACLE decrypts it. I am using ORACLE 11g Database.
    My company have a requirement that passwords are not stored in the clear in properties files. the reason being I suppose that if the password is stored in plaintext someone could hit the property file directly, get the password and then connect to the database with it.
    For a regular user connecting through an Oracle client or SQL Developer they would need to have the plaintext password in order to connect.
    its based on the requirements of
    International Standards Organization Guidance
    ISO 17799 � 9.5.4 requires password management systems to:
    � enforce the use of individual passwords
    � allow users to select and change their own passwords if appropriate
    � enforce a choice of quality passwords
    � force regular changes of passwords
    � maintain a record of previous user passwords to prevent re-use
    � not display passwords when they are being entered
    � store password files separately from application system data
    � store passwords in encrypted form using a one way encryption algorithm
    � alter default vendor passwords following installation of software
    So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.
    I have feeling there is a way of configuring this in Oracle advanced Security, but just can't quite get it to work.
    Edited by: user5568473 on 20-May-2013 00:05

    So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.... and neither can your application. Encryption is needed in this case. The decryption must be written into your application. I've written my own in some cases, but finding a library for your development language is a smarter solution.
    One alternative is using an Oracle wallet. It doesn't fit every circumstance and does have some maintenance headaches.
    You can set up a basic secure password store to encrypt and store the password for a given user@instance combination, and then connect to the database without passing a password. SQL*Net adds in the appropriate password from the wallet for when you connect.
    http://www.oracle.com/technetwork/database/security/twp-db-security-secure-ext-pwd-stor-133399.pdf
    Advanced Security Option also allows you to set up a Public Key Infrastructure connections (SSL encryption and/or authentication). It also uses a wallet to store the SSL certificates and credentials. I don't have personal experience on this approach.
    SSL and the wallet allow you to connect to the database similar to CONNECT/@net_service_name or sqlplus /@net_service_namehttp://docs.oracle.com/cd/B28359_01/network.111/b28530/asossl.htm#CIHCBIEG

  • How to create a configuration file for open ldap.

    hi,
    I have installed open ldap on my machine. Now I want to configure it to NetWeaver.
    For this, I started configuration through configtool utility of NetWeaver. While configuring, we need to select or upload configuration file. But now as it is open ldap we need to write our own config file.
    I tried it by selecting dataSourceConfiguration_ads_deep_readonly_db.xml  as a configuratio file. it shows successful test connection but the user which  I have created is not appearing in UME store.
    Does any body having solution for this?
    I am trying to solve this problem from two days. I really appriciate one who will sove this problem

    Well the configuration file you chose does not allow users created in NetWeaver to be created in the LDAP.  That's why it's a "readonly" configuration.  I would guess that you need a custom configuration file specifically for open ldap.
    This should help get you started on a custom configuration file:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm
    Then again, if the only problem with the .XML file you chose is that you can't write to the LDAP, give the dataSourceConfiguration_ads_writeable_db.xml configuration file a shot.

  • How to generate an XML Configuration File for EBS Source Type

    Hi,
    We have installed SES, I want to integrate it to enable for searching repository contracts.
    In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
    For this source I need to specify the Configuration URL.
    Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
    Is there any steps on how we can create this XML file.
    like I would want to know how we can create the XML file and on which folder on the server should I be putting it
    Thanks

    Hi there,
    We are running into same issue and need the exact same information. Can someone help with this question on priority?
    Thanks,
    Darshan

  • Unable to load new information from configuration file /var/ldap/ldap_clien

    Hi all,
    When I run the command "ldapclient init", I got the error message:
    # ldapclient init -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=ca -a domainName=example.ca -a profileName=UserProfile -a proxyPassword=pwd 10.1.10.50
    Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Unable to open filename '/var/ldap/ldap_client_file' for reading (errno=2).').
    Any idea?
    Thanks a lot for your help!

    Does the profile UserProfile exist on your LDAP server?
    Do the logs on your LDAP server show access problems?
    Try using -v to get more verbose output

  • The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

    All,
    I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
    configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
    error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
    tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
    As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
    when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
    This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
    to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
    trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
    groups for different applications, just as I'm trying here with Office 2013.
    Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
    and publish all applications within a package to a user regardless of whether they are in the correct group or not?
    The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
    Thanks

    Nicke,
    The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
    No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
    http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
    2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
    I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
    on the machine when delivered?
    <Configuration>
      <Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
        <Product ID="ProPlusVolume">
          <Language ID="en-us" />
    <ExcludeApp ID="Access" />
    <ExcludeApp ID="InfoPath" />
        </Product>
      </Add>
    </Configuration>
    3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
    through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
    I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
    http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
    rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
    Dan,
    Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
     From what I’ve read / watched  I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
    them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
    (I think).
    The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
    users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
    However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
    suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
    to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
    Is my understanding above correct or have I missed some options / methods?
    If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
    this use case is the AppV method one which will be unsuitable?
    Thanks

Maybe you are looking for

  • Oracle 8i listener issue:  TNS-01168: Cannot allocate memory

    We have a loader application coded in perl/c which connects to DB to load data from flat files. Whenever we have multiple such loader programs running, the listener dies and loading stops. The listener.log is around 2GB. I opened the loag and got fol

  • How to create a user selected power supply turn on sequece

    I'm trying to come up with code for a user to select the turn on sequence of a HP6626A supply, by entering the numbers 1, 2, 3 & 4 in the approriate channel to be turned on.  Does anyone have such code or any ideas on how to write it?  Thanks in adva

  • Monitoring DBMS_JOBS status

    Hi all, I have Oracle 11gR2 on windows 2008 server R2 64 bit version . its my development environment.i have given create, delete, modify dbms_jobs to other users , when i check in user_jobs some body changed the last_date column .. So issue here is

  • Clone stamp - fixed position sampling?

    It seems there is a way to fix the sampling to a fixed position on the alt-click so that the cross does not move even though you are moving the brush. Is that correct and if so, how?

  • Was able to move books to old Nook but ADE does not recognize the newGalaxy Tab4 nook that I got

    was able to move books from ADE to my old Nook, but can not get the program to recognize my new Galaxy Tab4 nook. If copy and paste, am unable to open......does not accept my Adobe ID