Tricky bridge problem to studio out back in the woods.

I've tried all sorts of configurations... here is the problem: Happy in the house with my MacBook and my husband's iMac using airport to the old clam- shaped Extreme and DSL. Would like to use my old iBook for internet work out at my studio space that is out back - 160 yds into the woods. My husband's office is about half way between so I thought if I could bridge the airport stations, I might get this to work.
I purchased Airport Extreme and an Airport Express to use for the bridge. Is it too far for the signal, as all I get is the flashing amber signal? Do I need to load more software? I don't want to screw up the existing network, so I'm reluctant to try this. I'm stumped and the stuff is due back in Rochester (hour and a half away from here) in a week if it doesn't work. Any geniuses out there that could help with some advice? Thanks!

mharris56, Welcome to the discussion area!
The range of the AirPort Express (AX) is 50 yards. So it won't bridge the link from your house to your husband's office nor the link from your husband's office to your studio.

Similar Messages

When I tried to access into safari the ipod kicked me out back to the main screen, what is the problem? what i need to do? Help me please...!!!

When I tried to access into safari the ipod kicked me out back to the main screen, what is the problem? what i need to do? Help me please...!!!

Try:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Going to Settings>Safari and deleting cache, history and cookies.

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Problems with video out after closing the lid.

I bought a Mini-Display Port to HDMI and connected it to my macbook pro and to my tv....Everything is perfect i close the lid....Now i am pretty sure i read somewhere that you can still use your macbook if you have it connected to an external screen and even if the lid is closed...can anyone tell me if i have to do something in the preferences?or is it just normal...I am new with macs,just bought mine 1 1/2 months ago so please take it easy on me... :P Thanks

You can use the MacBook Pro after you close the lid it's called 'Clamshell Mode' but for it to work correctly you have to attached a keyboard and mouse as well as the TV, then you can close the lid to put it to sleep then touch a key on the keyboard or move the mouse and it will wake up again and display on the screen.

Selection-screen problem:need to go back to selectionscreen not source code

Hello experts,
Please help me on my dillema. I have 2 reports, zreport1 and zreport2. Now, zreport1 submits
values via selection-screen to zreport2. Now here is the problem, when I press 'BACK' on the
selection-screen of zreport2(rememeber we used submit statement via selection-screen on zreport1)
instead of going back to the selection-screen of zreport1 it goes to the source code of zreport1 which
is wrong. And there are 2 selection-screens on zreport1 depending on the user if he is controller or not.
So what I need to do here is that whenever I press 'BACK' either I'm adding or modifying or displaying records
it should go back to whatever screen I called in zreport1.
Here's a diagram.
ZREPORT1**
if v_controller = 'X'
    display selection-screen 1500
else
    display selection-screen 500
endif.
if user wants to add records, submit values from zreport1 to zreport2
and return via selection-screen.
*same goes for edit option.
if user wants to display, get all records then display in ALV.
ZREPORT2**
So lets assume user decides not to add records and decides to go back. so he presses
the BACK button in selection-screen of zreport2. Now here's the nasty part, instead of going back to either
selection-screen 500 or 1500 in zreport1, it goes to the source code of zreport1!. I hope I explained it clearly.
Again, thanks a lot guys for your help!

Hi,
Try this
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
*----------Check Condition & back to select screen-------*
IF condition.
    MESSAGE s207(zusm_gen) DISPLAY LIKE lc_e .
    EXIT.
ENDIF.
Set something in the memmory.
this can be used to check the completion of the report.
if the 2nd report executed porperly then u further execute the code.
If u dont have any thing to execute after sumbit report
then u can do is.
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
    MESSAGE s207(zusm_gen) DISPLAY LIKE 'S' .
    EXIT.
Message was edited by: Manoj Gupta

My email has frozen on iPhone 4s and will not load just kicks me back to the home screen, any ideas?

my email froze yesterday now every time i open the app it gives me a blank screen and then after a fe secs kick me out back to the home screen. i have tried restarting, turning on and off, restoring, deleting account and adding it back on and changing my password but nothing has work, any ideas?

While shut down and restart probably doesn't work, see if you can remember the last email that you were reading. If it had a moticon or large attachment, try going your desktop and moving that email to a deleted folder. Then go back to your email on your iphone it should be working. That worked for me. I then went back to my desktop and moved the email in question back into my inbox.

When i open my Ipod app it will just freeze and take me back to the homescreen?

Everytime i open the Ipod app, its freezes and takes me out back to the homescreen, please help. !

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Time Machine backing up the same location?

I have recently switched my backup external HD to my airport extreme. Before TM was doing great, doing everything it was suppose to. When I switched it to the airport it was overwriting the previous backup instead of creating a new tier in TM. I figured it was because I switched locations. I erased the disk and reformatted the drive, then I set everything up in TM to work with the Airport disk. Unfortunately I'm having the same problem, it's just backing up the same area over and over. I can not look through "time" it's just stuck at the one image.
Does anyone have any suggestions? Thanks.

John Potts wrote:
Mine does the same, except it's "only" 1.4GB each time. It does this even though zero new data has been added to the hard drive (by me).
I have tried TimeTracker as recommended above but it seems to be very pre-beta indeed: according to the log, each Time Machine backup adds 0KB. And the original backup was also 0KB.
The backups will show zero until you click them, or set the Preference option to +*Automatically load backups.+* And the first one always shows zero (you really don't want to wait while it calculates the size of everything that was on your system). If they still show zero, you may be using an account that doesn't have permission to see them. Try signing-on as an Admin.
Moreover, when I invoke TimeTracker it remains on the desktop and can't be quit.
Did you try Quit? Either from the menubar or Cmd-Q?
I have my VM folder marked as excluded from back up, along with three external hard drives. Obviously, something must be going on that I don't know about. Are there are other tools that track the TM backups (in addition to TimeTracker)?
Try the BackupLoupe application, at: http://www.soma-zone.com/BackupLoupe/
But you'll likely have the same problems with it as you did with Time Tracker, as they don't sound like problems with the app itself, but your permissions.

I did the upgrade to IOS 8.0.01 or the latest one and for the past 12 hours my phone has blanked to the apple logo, to a blue screen, back to the apple logo. I have the best and fastest internet you can get. I have tried to re-boot the phone.

I did the upgrade to the IOS 8.0.1 or whatever the latest upgrade is and for the past 12 hours my phone has shown the apple logo, went to a blue screen, blanked out back to the apple logo, to the blue screen over and over. I have re-booted the phone and it still does that. I need this fixed. Please help !

I've done the reset setting on my iPhone 5s & my device crash again while watching YouTube. The screen turns blue & the device won't start for 2mins. Can someone please help?

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When trying to sign out of Hotmail the "back navigation button" remains green and I have to click sign out again and the same thing happens over and over and the only way to close Hotmail is to go to File and Close Frame, so what's my problem?

When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.

I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

Problems with filling out/going back and editing filled out information and signing forms

Users cannot fully fill out, edit and save forms--
the forms were set up in InDesign CS6, then edited in Adobe Acrobat Pro 9 for all the form info and after that was set up the forms were saved as extended pdfs to allow adobe reader users to fill them out and sign.
The users are having all kinds of issues with the forms and its been difficult to pin point the exact cause.
Here are 2 errors:
This document enabled extended features in Adobe reader. This document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document.
The security settings on this document prevent adding text and/or placing a signature on it from Adobe Reader. To fill out and sign this document you need to print it out.
---I've checked the security on the form and there is no security not allowing them to fill it out and I believe that originally they were able to but the form was saved and then they went back and were unable to edit it. I need to know if its something I need to do on my end or an instruction I need to give to them--steps to filling out and saving programs vesions to use etc..
sorry for some of the holes in the info. the form was created for a client and they sent it out to their employees so I do not have direct contact with the people having the issues just two screenshots, and I have not been able to find an answer that works--this is what I thought would help but it didnt:
It should solve the signature/adding text issue—From : http://forums.adobe.com/thread/987256
Your user should go to Extended pane in Reader to apply a digital signature to the Reader extended PDF.
The user is probably trying to use the Sign pane in Reader which has some options disabled according to the document permissions. The new Sign pane in Reader is an integration with Adobe EchoSign service in the sense that it enables an end user to fill-up documents, electronically sign and then send a PDF document, without having the need to print them. The Sign pane provides two options to the user:
1 - Fill and Sign: Here the user can place text using 'Add Text'. Users can add arbitrary text to a PDF, eg. in documents where Reader cannot interact with the document even though the document looks like a form, in forms where user cannot save the filled-up form. In such cases the only option a user has is to print the form, fill it and then fax or fedex the filled up document to the author or scan it and send it electronically. Using the Sign pane in Reader, a user can add text and also electronically sign the document (this is not the same as digital signature) using an image of their signature. He can create a 'signature' from a scanned paper which has user's handwritten signature and place it on the PDF.
2 - Send for Signature: Here the user is sent to EchoSign for collecting signatures from others.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

I have a feeling this has been up here a lot. I updated ios 6 to my phone with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

I have a feeling this has been up here a lot. I updated ios 6 to my phone (4S) with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

if you have no back up in icloud or itunes the best you can do is sync with your computer and get back what you can from there

When I code script window.history.back(); /script on a page due to a data validation problem, all browsers except Firefox redisplay the filled-out form page.

When I use javascript "window.history.back()" because a user enter invalid text, Firefox returns to the page with the form on it but it clears out the form. All the other browsers go back to the previous page with the form filled out as it was when submit was entered.
Firefox did not used to do this. I do not change browser settings from default to get this unfortunate behavior. This may mean Firefox is more secure, but only on a public computer. On a private computer, this sucks.

See if this helps you.
https://developer.mozilla.org/en-US/docs/Web/API/Window.history
If not, try posting at the Web Development / Standards Evangelism forum at mozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox.
http://forums.mozillazine.org/viewforum.php?f=25
You'll need to register and login to be able to post in that forum.

Tricky bridge problem to studio out back in the woods.

Similar Messages

Maybe you are looking for