Tricky Issue with connecting to Lync server from my desktop lync client 2010
I am facing a tricky situation here,
Firstly i have 3 modes of connecting my laptop to the internet as follows:
1)Using Wi-Fi connection.
2)A physical LAN cable connection
3)An internet data card (A USB data card).
Now, i can comfortably use my Lync using 1st and 2nd mode of connectivity. But i am having a real issue using the 3rd mode of connectivity i.e using internet data card, it just doesn't connect to the Lync server at all, even though i can browse internet
very well.
Later i got a workaround to solve this, what i did was, i connect to internet first with 1st and 2nd modes i.e wifi or lan cable and then i also connect to internet using 3rd mode i.e data card.
After this i start my Lync, which now connects perfectly and then when it is connected and working.
I disconnect my WiFi or LAN cable this causes Lync to restart, but this time it connect within minutes again using internet of my datacard, isn't this Bizarre ??
Now Could someone please help me to connect the Lync just by using my internet datacard?
Atlast 2 thing which may be of help is :
1)I can easily connect Outlook to the exchange server using my datacard and retrieve my mails.
2)When i connect to internet using my internet datacard, I can still see "Not Connected Symbol" in my network indicator on my Win7 PC, But i can still Brows
internet.
This problem may have something to do with networking, not sure. Please Help me to solve this !!!
Ambrish
Infact it was a Network Issue, found following on technet and solved the issue:
I found a solution for (my version of) this problem. My tray icon never showed the red X, but if I clicked on the icon, the popup showed a bigger icon with a red X, and said "Not connected". As in your case, Internet worked, but I'm unable to setup
a VPN connection because it insists on using a non-existent modem, obviously because I'm "not connected" (which I am).
I monitored the processes running the NlaSvc and Netprofm services (using ProcMon), and noticed that both were denied read/write access to subkeys within the HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList hierarchy.
The processes were running as NetworkService and LocalService, respectively, so I tried adding full access for these service accounts to the entire subkey
mentioned above. Notice that permissions are not automatically inherited in the registry, so you may need to explicitly "replace all child object permissions with inheritable permissions from this object".
Within seconds, Network and Sharing Center tells me I'm connected to my domain. Yay!
A reboot was required to fix the tray icon and its popup.
However, I'm still unable to add my VPN connection.
I'm interested in hearing from you guys if your registries miss the same permissions? If so, Windows 7 must have a bug somewhere with misaligned service permissions/rights.
Ambrish
Similar Messages
-
If anybody have a problem with connection to smtp server from iPhone
If anybody have a problem with connection to smtp server just add new server
Seetings → Mail, Contacts, Calendars → User Me account → Account → Under Advanced choose Mail → SMTP → Add Server
smtp.me.com
user name ([email protected])
password
Apple, i am in love with your product, please fix this so we could injoy it even more.Might be something to help you here > iCloud: Mail server information
-
Wss3 Issues with user check in files from within excel or word 2010
I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE. -
Issue with connecting to SQL Server Database in 11g
Hi
We successfully created odbc connection say "Test" to read SQL Server database using odbc admin.The issue we are facing in 11g is, we are unable to import tables using the database connection "Test" in to Admin tool.
In 10g we did not come across this issue. We used the same credentials and process incase of 10g and 11g to read SQL Server database, but we are facing the connection issues incase of 11g.
Please, let us know is there any change need to be done to any config files or is there any way to overcome this issue.
Thanks.Hi,
What do you mean by 'we are unable to import tables using the database connection'
Do you get an error message or the connection fails or what
Please add the details about the issue in order to help
Regards
Adil -
Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver
i have some trouble with connecting MS SQL SERVER from ODI.
I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
could not load JDBS driver class..
thanksAfter more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
Hope this helps other people...
Thanks to those of you who offered suggestions and things to check...much appreciated.
Robyn -
New install issue-unable to connect to DB server from a remote client.
Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.user6391746 wrote:
Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.solution depends upon which ERROR is thrown.
Is COPY & PASTE broken for you?
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds. -
Oracle Weblogic Server 12c, issue with deploying the war created from Wavemaker tool
Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcgHi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg -
Unable to connect to WSUS server from the console
I am not able to connect to WSUS server from WSUS console any more suddenly! "please verify that IIS on the server is correctly configured and is running'. I find out that Windows Process Activation Service is stuck in starting.
I killed it with taskkill command but I am not able to restart it. It gives 'Error 1053: the service did not respond to the start or control request in a timely fashion'.
There are some suggestion online but I am not comfortable with those solutions, I prefer to be guided by Microsoft TechNet, thanks.
Thang MoHi,
are there any relevant entries in the system log viewer?
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :) -
Unable to connect to Admin Server from second machine using WLST
Hello,
PROBLEM
Can't get WLST to connect to admin server from 2nd host to register the domain.
SETUP
I have 2 Centos VMs running on Oracle Virtual box in a single laptop. Both the VMs use "Bridged Networking".
VM-1 CONFIG
cat /etc/hosts
192.168.1.17
dom1 dom1.my mac1
192.168.1.51
centos2 mac2
VM-1 hosts admin server & one managed server
VM-2 CONFIG
192.168.1.51
mac2
192.168.1.17
centos1 mac1
VM-2 hosts just one managed server
I can start up admin on VM-1 fine. The node manager is reachable too. Both the VMs are can be pinged from each other. I can also telnet to the admin server's port ( telnet 192.168.1.17 7001) from the second server.
My HOST OS is Windows 7. I can ping from windows to both the VM IPs too. The reverse is working fine as well.
I've tried both mechanisms of copying the whole domain from machine 1 over to machine2 & also using the pack.sh/unpack.sh combinations to transfer the domains.
When I invoke WLST, this is what happens
./wlst.sh
CLASSPATH=/apps/prod/appservers/weblogic/wls_10_3_6/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/prod/appservers/weblogic/wls_10_3_6/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.25.x86_64/lib/tools.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/features/weblogic.server.modules_10.3.6.0.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/webservices.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/apps/prod/appservers/weblogic/wls_10_3_6/utils/config/10.3/config-launch.jar::/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbynet.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbyclient.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> connect('weblogic','weblogic123','t3://192.168.1.17:7001')
Connecting to t3://192.168.1.17:7001 with userid weblogic ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server : Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Fri Oct 11 17:11:07 NZDT 2013.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
wls:/offline>
Also, I can't invoke weblogic.Admin from the second VM despite setting the environment using "setWLSEnv.sh". i get the error "Error: Could not find or load main class weblogic.Admin".
Please could you help me fix this? I've spent 3 days now trying numerous things without much luck :-(
Kind RegardsHi Raj,
Issue is with NM registry with domain home. Please follow the below steps and let us know the status.
1 . Check whether the node manager port ( default 5556 ) is opened for communication on both Admin and Managed server.
2 . After opening the port - We would need to enroll the node manager home with domain home to establish the communication between Admin and Managed server.
a . Start the Administration Server.
b . Using the Administration Console update the Node Manager credentials from the Advanced options under domain_nameArrow symbolSecurityArrow symbolGeneral.
c . Invoke WLST and connect to an Administration Server using the connect command. See Using the WebLogic Scripting Tool in WebLogic Scripting Tool.
d . Run nmEnroll using the following syntax:
nmEnroll([domainDir], [nmHome])
Running nmEnroll() ensures that the correct Node Manager user and password token are supplied to each Managed Server. Once these are available for each Managed Server, you can use nmConnect() in a production environment.
Note: You must run nmEnroll() on each machine that is running a Managed Server. Additionally, you should run nmEnroll() for each domain directory on each machine.
For more info : General Node Manager Configuration
Thanks
Lakshman -
Error while connecting to SQL SERVER from OWB
HI All,
I got the following error while connecting to SQL SERVER from OWB(10gR2).
1). Created DSN with (GMSCADA)
2). tnsnames file is updated with the following information
GMSCADA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
(CONNECT_DATA =
(SERVICE_NAME = SA)
3). Tried to connect to SQL SERVER frm OWB
Username: sa
password: sa
host: 172.16.60.29
port: 1433
service name: GMSCADA
schema: sa
I got the following error, when I click Test Connection:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from OWB_3095
Regards,
Kumar.Hi David,
What is Gateway, How I have to setup, Please let me know.
I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
Can u please let me know.
Regards,
Kumar. -
How to connect to SQL Server from Forms 10g?
Hello all,
How do we connect to SQL Server database from Forms 10g?
In Oracle Metalink site they have suggested using Transparent Gateway for SQL Server as a solution.
But is there a way we can connect directly to SQL Server from Forms using an ODBC connection
without installing anything on the database server?
Pls help!
Regards,
SamHello all,
I was able to connect to SQL Server from Oracle using Generic Connectivity (HSODBC).
Transparent gateway was not required.
Followed metalink note 109730.1
So, after I created a dblink to SQL Server, I created a synonym for the dblinked SQL Server table.
When I used the synonym as the table source in Oracle Forms, I got the following error while querying.
"ORA-02070 - ROWID is not supported in this context."
This is because Forms has an invisible ROWID field and when data is fetched from SQL Server table
no Rowid is fetched since SQL Server table doesn't have one.
Is there a way to overcome this issue or do we have populate the block manually using a SQL query ?
Pls suggest.
Regards,
Sam -
Error connecting to planning server from EAS
We implemented Hyperion Planning about 1 month ago. We are having this intermittent issue with connecting to Planning servers. When the users attempt to add a Business Rule, they select an outline, and browse to the planning servers. When they click one of the two servers they get the message "Error connecting to Planning server <<Server A>>". The message only happens on Server A.
I check the planning service, it is running. I login directly to the planning application (http://<<Server A>>:8300/HyperionPlanning/) , it works fine. However I still get the error. The problem comes and goes, but once is happens the only solution seems to be restart all of the services on the Planning server.
Is anyone experiencing this issue?
If so is there a resolution? Is this a common thing with Hyperion Planning?
I opened a TAR, but because the issue is only happening occasionally (1 day in 5) I thought I would try the forums. Any help or suggestions would be appreciated.Hi,
What version of planning are you running, there was patch 9.3.1.1.1 that addressed
6636367 (8-665086601) When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
This maybe the same sort of issue you are experiencing.
Cheers
John
http://john-goodwin.blogspot.com/ -
Issue with Emoji icons when sent from iOS6 to iOS5
Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problemHi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker -
I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?
Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.) -
I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.
I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.
Maybe you are looking for
-
How do I use a Creative Cloud license when I have limited Internet for months at a time?
How do I use a Creative Cloud license when I have limited Internet for months at a time? I proces a lot of photos in remote areas where an application that needs online access would be useless.
-
Spml2 :: Living la vida loca
Hej, I just installed spml2 on the idm 7.1.1.2 and i runned some examples so far looks pretty nice... but I have no idea how to get information back.... I tried this for example: String url = "http://--------------/idm/servlet/openspml2";
-
2LIS_12_VCITM populates the same Shipping Point and Receiving Plant
Hi Gurus, We are using 2LIS_12_VCITM extractor which answers all delivery-related requirements. However when I checked the data in RSA3, Shipping Point and Receiving Plant are the same. So I checked some sample deliveries in table LIKP and it shows t
-
Deleting old items in TC?
Can I delete manually in TC? And how do I know what to delete? Is it so that all bundles are 100% complete? So that I can keep ex. one bundle form 2010, one from 2011, 2012 and so on? To free up space on the TC and so that the oldest copies don't get
-
Separate number ranges for GR against PO and GR against Production Order
All SAP Gurus, Is it possible to have Separate number ranges (for Material Documents as well as for FI Documents) for GR against PO and for GR against Production Order? Regards,