Tried all of the fixes for Ical, still crashes short of reinstall

Hi All
I have tried to search for fixes for my Ical crashing, I have deleted the cashe, moved it to the desktop however it still crashes
I havent upgraded to leopard, I'm still running
Date/Time: 2008-02-06 16:57:35.366 +0000
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: iCal
Path: /Applications/iCal.app/Contents/MacOS/iCal
Parent: WindowServer [61]
Version: 2.0.5 (1069)
Build Version: 2
Project Name: iCal
Source Version: 10690000
Any thoughts please
and a newbie question....if I have to reinstall, where is the software to do it

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Similar Messages

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help?

My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.

It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam

My iPhone 5 is showing up in desktop mode on Windows 8 but does not show up in Itunes, I have tried all of the troubleshooting steps but still have not results. Please help.

I cannot find a solution to this problem.

when i did all of the trouble shooting it still did not work
And what steps did you try?

My firefox won't work; It says "unable to connect" and I have tried all of the tips for troubleshooting and it still wont' work.

Firefox opens up with an "unable to connect" message; it also says it cannot establish a connection to the server with these three bullets: 1) The site could be temporarily unavailable or too busy. Try again in a few moments.
2) If you are unable to load any pages, check your computer's network connection.
3) If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I have tried to do all of the tips that you have on your website for troubleshooting and nothing seems to work. I know it is not my Internet connection because my roommates can get on Firefox without a problem and my Internet Explorer opens just fine.
== This happened ==
Every time Firefox opened
== I wanted to do homework last night. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; Tablet PC 2.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; AskTbARS/5.8.0.12304)

Ccote15-
If your iPad is defective and is still under warranty, you can take it to an Apple Authorized Repair Center and get it fixed. If you are worried about a defective replacement, then a repair may be a better way to go. <Apple Authorized Repair Centers>
Personally, I would prefer getting a replacement. You read about many defects here in this forum, but they only represent a tiny percentage of all iPads sold.
Fred

The Flash Plugin - I cannot it get it to work. I've tried all of the fixes oin the forums and the FAQs. But nothing works. I guess that until either I get it to work,, or an update is made available - I cannot keep Firefox as my default brower.

All of the detail is in the question

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

HT203171 My curser pad is not working and the curser is going crazy. I have tried all of the above but it still does not work

My curser pad is not working and the curser is going crazy. I have tried everything and it still does not work?

I don't know what other solutions you've tried but on mine it was like a "Ghost in the Machine" (moving around and clicking on things on its own) and all I did to fix it was to lightly dampen a cotton ball with window cleaner (evaporates) and clean firmly around the inside edge of the pad and to also click it firmly quickly and many times to clean out ANY kind of dust or debris that has fallen into the cracks. worked GREAT for me , so far!!???

TS1398 I have tried all of the above and am still unable to connect to my home broadband, the pc is fine and so was the itouch up until yesterday, any help would be gratefully received.

Yesterday my wifi would not work on my itouch, it has been fine since purchasing. Today I have tried everything mentioned by supporters including restoring the itouch, but just get the message "unable to join the network". Anyone have any more tips?

Are you positive you are entering in the correct password? Have you tried rebooting the router by unplugging it from power for about 30 seconds or so?
What happens if you head to Settings -> General -> Reset, tap Reset Network Settings, and then try to reconnect to your home Wi-Fi network.
B-rock

I guess this is a "settings" question. I have tried all of the fixes you suggest to get rid of the "Firefox Was Recently Updated" window popping up as my home page. Anything else to try.

My normal home page no longer comes up when I start browsing. Your introductory page comes up and stays up, along with asking me a question about allowing information gathering.

That probably won't help if you have other software running that is protecting the file(s) in the Firefox Profile Folder.
Which security software (firewall, anti-virus) do you have?<br />
Does it have any virtualization or sandbox features?
You can try to boot windows in Save mode (F8 on boot screen) to see if that makes it possible to remove the file.
You can also try a new profile to see if that works.<br />
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT1212 i have tried all of the suggested things still cant get in the ipod

i have tried all of the suggested things and still cant get in the ipod

As instructed in the If you have never synced your device with iTunes, or you do not have access to a computer section of the article, put it in recovery mode and restore:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

I deleted the photos from my iPhone 6 that were synced from my computer automatically but it is still using my storage. How do i fix that? I have tried all of the steps listed in the community.i have the new iTunes 10.

Hi QuisB123,
If you are having an issue with reclaiming free space after deleting photos from your iPhone, use the steps in this article to assist -
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
Specifically -
Orphaned files might remain on your iOS device if it's physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, you might see a large amount of "Other" disk usage for the iOS device in the Capacity indicator in iTunes. Try these steps:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes. If you see the "Not enough free space" alert, continue to step 5.
Turn off the automatic syncing functions for the iOS device:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes. If you see the "Not enough free space" alert, continue to step 6.
Restore using iTunes.
Thanks for using Apple Support Communities.
Best,
Brett L

TS1389 I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!

I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!

Delete and redownload them if doing so is free in your country.
(69918)

HT203242 I've tried all of the suggested solutions, but I still can't get my cd drive recognised. If I delete the driver and rebot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive

I've tried all of the suggested solutions, but I still can't get my cd drive recognised on my laptop. If I delete the driver and reboot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive, which is not accessible and neither is the CD drive

I had the same or similar problem after installin iTunes 11 on my Acer Laptop with Vista. The new iTunes ran but I
completely lost access to my CdRom/DVD drive. Error Code 19 was displayed in Windows Device Manager. Found out
this is more widespread of a problem than expected. After trying several forum recommended fixes, the Only thing that gave me back my CdRom drive was doing a Windows Restore to a date prior to iTunes 11 install. I got my drive back but it also restored me to the prior 10.0.7.21 vers of iTunes which no longer worked due to missing files. iTunes help
recommended a Reinstall. I am reluctant to do that for several reason. That's where I am at for now until I find out if there are any other risks for using iTunes 11 vs. Registry Errors vs. Losing access to my CdRom drive. Brad

I have the iPad 2 and for about two months now the home button only responds part time. It works occasionally and I have tried all of the tips on the discussion board.

My iPad 2 has a hoe button that is not responding constantly. It will either work right away or not respond for up to an hour. I have tried all of the suggestions posted on other questions and it's becoming ridiculous. I have a warranty but am afraid that if I get another iPad 2 the problem will continue on the new one.

Ccote15-
If your iPad is defective and is still under warranty, you can take it to an Apple Authorized Repair Center and get it fixed. If you are worried about a defective replacement, then a repair may be a better way to go. <Apple Authorized Repair Centers>
Personally, I would prefer getting a replacement. You read about many defects here in this forum, but they only represent a tiny percentage of all iPads sold.
Fred

Mid 2010 MacBook pro took a keyboard spill. It still works but display is sooo dark - like no backlight. I think this is an LED screen. Does anyone know the fix for this?

Hi all... My mid 2010 MacBook Pro took a keyboard spill. It still works but the display is very very dark. A faint image can only be seen at an angle in very bright light. I think this model has an LED screen. Can anyone please tell me what the fix for this is? Thank you sooooo much!
< Email Edited By Host >

Spill Cleaning
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync. Any ideas on how to fix this?

I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?). I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something).
It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to. (I backed it up and sync'd it right before I tried to update the software.)
Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath. When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen. So I'm unable to access the iPhone portion of iTunes.
I have tried to turn it off, with no luck. I have tried rebooting my laptop and syncing, but I still get the same result.
Does anyone know how to fix this?
I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
Thanks in advance for your help!

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Tried all of the fixes for Ical, still crashes short of reinstall

Similar Messages

Maybe you are looking for