Tried both 25 and 587 and still can't send or receive
I have tried changing to both 25, 465 and 587, and still can not use my mail app.
These were the 3 primary port suggestions I could find on this site and forum. Sorry if I missed any other easy ones.
Any suggestions? I have called support and gone to the store ("bar") and still no suggestion that works.
Any help would be appreciated.
DJ
Greetings,
Typically, of most of the users that are having issues with their Mail, can receive mail fine but sending is usually the issue. You will need to know the correct port that you need - usually 25 or 587. If you can surf the Web, you can do email.
You will need to check with your home ISP for the correct parameters, if you are at home. If you are at work, or elsewhere you will need to know those parameters in most cases if you want to send because more and more ISPs are blocking all SMTP servers other than their own. I know I do.
If you have Web access to your email, you can use that, and some IMAP mail providers will work about anywhere, but you still need to know the particulars. We block Dot Mac's IMAP to where I can receive email. but I have to plug in the local SMTP server to send anything, because of the local blocking. I don't have any problem with that as it's another layer of security.
There is nothing wrong with Mail 3.2 or Leopard, they are not flaky. The problems are setup and configuration issues - once you know the correct parameters and setup routines, it all works fine.
I have never had an issue of note with Mail or Leopard - I use my Dot Mac mail and Exchange mail, in our Active Directory Domain, at work. I also have a Road Runner POP account that I use as well.
Good Luck - Cheers,
M.
Similar Messages
-
I've tried everything in this article and still can't send or receive email. I also contacted my provider and everything is working on their end. Does anyone have any suggestions?
Went to Apple Genius Bar. Info from them plus my provider resolved the issue
-
all of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My phone bill is paid and I can't send or receive msgs and I tried to call Rogers but that doesn't even work and if it was a bill issue I could still call Rogers think it might be software but I would like to know what to do
I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator -
I have tried to send photos through text messaging and it will not send. I thought my iPhone 3 was giving out so I got my iPhone 4 last night and still can't send photos through text message. What is the deal??
Also MMS is supported on a carrier by carrier basis. While mostly every carrier does support ths feature make sure that your carrier allows this functionality.
-
I have had an EE account for 3 weeks now and still can't text or receive calls
I have had an EE account for 3 weeks now and still can't text or receive calls
What did your carrier say when you reported the problem to them?
Who is your carrier? Are they on this list? http://support.apple.com/kb/HT1937?viewlocale=en_US&locale=en_US -
I just bought a new 4s and I can't send or receive texts. Also when anyone calls it comes up as "unknown" but I transferred all my contacts. Is this a device issue or a carrier problem?? I've tried everything. Reset the network and some a hard reset but no changes.
I believe the root cause is IOS5.01. same problem on my iphone4s with IOS5.01. Now I have a expensive I-touch! wake up steve.............. I suggest you change your sim cark from 64k to 128k. or just waiting next generation IOS.
-
This really ***** that they sent out and update to the iPhone ISO6 and I can't send or receive pics! Being that its apple you would think they would know better than to send out a bad update like this! I'm paying for a service and I can even use now!!! I'm very upset! Think about canceling my iPhone 5 order! This is terrible!
Wahhhhhhhhhh! Wahhhhhhhhhh!
Are you over your little tantrum now? Do you want help you would like to continue to act like a toddler?
If you want help, try telling us what happens when trying to send pics. Any errors?
If you want to whine... go somewhere else. -
Does anyone know what error 6179 is? It's coming up over my mail icon and I can't send or receive mail. My OS is Yosemite
Mail troubleshooting - Yosemite
Mail (Yosemite): If you can’t receive messages
Mail (Yosemite): If you can’t send messages -
I just got an IPhone 5C and I can't send or receive pictures on it.
Does anybody know how to fix this? I have MMS turned on, but still can't send or receive pictures on my phone.
Check with your carrier to make sure your service with them is correctly provisioned
-
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
HT5624 I changed my password and still can not send mail
I changed my password still can not send mail
Hello meyerjo,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mail: Troubleshooting sending and receiving email messages
https://support.apple.com/kb/TS3276
Have a nice day,
Mario -
Moved hosting of email and now can't send or receive emails
did a search on the forum but can seem to find a solution to my problem.
so has any one ever had any problems with removing an email account (with estreet) and then adding a new account (with Dreamhost.com) to a blackberry?
it is the same email address but we moved the hosting last night.... vocapr.com
My client can't send or receive email but isn't getting an error message ... just nothing is happening. She can send and receive via Outlook and on my iphone.
we also did a hard reboot but it still won't send or receive emails.
Please advise.Hi,
If your using BIS - Log into your BIS account and delete the email address and recreate it again - the email server details are pointing to the wrong email server.
If your using BES ,then the BES needs to get the correct Mail Server details - Delete the user form the BES and add them back, then reactivate the Handset.
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq -
Tried both ways in the Wiki, still can't get network printing work
Hi,
I have tried both the client and server ways following the Wiki, still could not get network printing work.
For the first way, I tried to put either the host name or the ip address (starting with 192) of the remote printer into /etc/cups/client.conf. But both Okular and Evince failed to see the printer in the dialog.
For the second way, with cups-browsed running, it only managed to discover printers in my local network (ip starting with 137) which I have no access. I tried to manually add the printer using its ip, but it still did not work.
What can I do? I have spent hours trying to work it out but failed. I would appreciate a lot your help. Thanks.Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
-
I've reset, deleted, recreated and still can't send emails but can receive mail
I've reset, deleted email account, recreated email account. I can receive emails but can't send them.
Try a refresh on your e-mail account. Go your e-mail screen, where the account is listed, and long press the account name. A box will open with several choices -- press refresh. This may solve your problem.
Maybe you are looking for
-
I just installed photoshop cs6 on a third computer and I am having trouble opening it. Do I need to uninstall it from one of the other computers?
-
Imac 17 inch wanna format but no cd and password.
I have bought a used imac 17 inch,after i bought the system the told me i need to format to change the user settings were as he does'nt have the OS X cd and the password.i have tried the tips found on the net ,but nothing works .can someone tell me w
-
iPhoto won't import a large tiff file of a pano, one about 50K x 3K pixels, 852MB. Wondering if the problem is that it's a tiff, or the file size, or the megapixel count, or something else? It was saved in photoshop with no image compression, 'interl
-
Uprgaded to 6.0.4, now my computer runs like a turtle
I just upgraded from itunes 5 to 6.0.4 Now my CPU usage is thru the roof and programs take forever to open up. Even tasks as simple as switching windows to other app's take a few seconds. I have 1GB of RAM i don't understand why this is happening but
-
Can not open Organizer (downloaded few days ago) but the editor (photo and video would open). Have Window 8.1