Tried restoring, now not working
Hello. To start off, yesterday my iPod was working perfectly fine. Last night I tried restoring it and now won't even turn on. When I try to plug it in it says "Usb device not recognized." If anyone could help with this I would greatly appreciate it. Also, sorry if this topic has already been discussed.
- I would start here:
http://support.apple.com/kb/TS1538
(iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues)
- You also may want to try putting the iPod in recovery mode and try restoring:
http://support.apple.com/kb/HT1808
Similar Messages
-
Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
-
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?
Typos mad = and
Receive = retrieve -
itunes restore did not work what do i do now
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
The copy above was copied from this website.
http://support.apple.com/kb/TS3694#error14 -
My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
My mini iPad is now not working . just showing iTunes sign and to connect to usb cable.
my mini iPad is now not working . just showing iTunes sign and to connect to usb cable. I have done that buy macbook is not discovering iPad as a device. Any ideas ?
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
Cheers, Tom -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
just downloaded ios6 on my ipod touch and lost all color when I select an artist or song how can I get it to be blue again tried resetting did not work any help offered would be liked
You need to restore.
Everything should be on your computer, so you can just sync it back.
iPod touch User Guide (For iOS 4.3 Software) -
What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????
Maybe a reset would help, to be followed by trying the recovery again.
To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Then do the recovery.
If this doesn't solve it, I recommend visiting an Authorized Apple Service Center. -
I update my iphone 4g .now not working how to find old firmware version
i update my iphone 4g to newer version ios 7.now not working how to find old firmware version
Downgrading the iOS version is not supported by Apple.
Without know how it is not working:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
BTW you posted in the iPod touch forum -
My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?
The problem isn't solved after the restore, shall I bring my phone to the AppStore? Will they give me a new one? Or I should pay for that. Warranty is until December 2013;)
-
I had no problems with CS6 PS, but since I upgraded to PS CC, NVIDIA Tools is now not working and crashes when I try to reinstall the plug-in into PS CC. I checked NVIDIA's forums and found ZIP from them about this problem. So I am asking in here, is there another plug-in that will open .DDS files in PS? I am using Windows 7 Ultimate x64 for the OS, and I know the PS CC is 32 bit. Until I can resolve this issue, I am unable to do repaints of PMDG aircraft for my VA. Any suggestions would be greatly appreciated.
I had a similar issue but i solved it following the instructions explained here https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA.
I also reccomend you to install the bbswitch package which disables NVIDIA discrete graphics card when isn't used. -
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
-
My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?
You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.
Maybe you are looking for
-
Composite components with logic in JSF 1.2
Hi there, I wonder if anyone could direct me to a god, top-to-bottom, easy to follow tutorial on how to create custom composite components in JSF 1.2 with server-side logic. I've read on this forum (http://forums.sun.com/thread.jspa?forumID=427&threa
-
When I open iCal all my delegate's calendars are checked every time.
Since upgrading to Mavericks when i open iCal or even just maximize it from the dock all my delegate's calendars are checked. My whole work team (8 people with multiple calendars) are listed as delegates so each time I have to uncheck them all to see
-
Cannot unpause lion app download, its stuck?
I started to download the lion app and then had it start up and then stop. now i have the icon stuck in my dock on pause. when i go to the app store to check on it , there is only a download button and no pause or resume?
-
I need to create a report that answers multiple questions: Step 1: List markets where product is distributed by CompanyA Step 2: List top 250 markets based on overall product sales across all companies I then wish to create a report which contains a
-
Vivtar Webcam driver problem in Windows 7 Enterprise x64
Hi all, I had not long purchased a Vivitar DVR 708HD Camcorder and the camera itself is rather poor, but I was impressed with it's webcam function back when I had it working on a different computer. I'm not an amature as I'm usually quite good at fin