Tried to add a VIP email alert and now every email shows up on screen
A couple of days ago I tried adding a second email address from my friend as a VIP. Now, for some reason, every time I get an email from anyone from any account, it shows up with the badge and alert on my iPhone 5 screen. I do not want this. I tried going into the Mail notification settings and turning off everything but non-VIP emails still show up. Can someone help me? All I want to show up on my locked screen as alerts are three VIP email addresses.
If you are talking about app updates, these are permanently tied to the Apple ID used to purchase the app, regardless of the ID on your phone in Settings>Store. The only way to stop the prompt for your older ID would be to delete these apps from your phone. The ID in Settings>Store is the one being used for current purchases, not updates of apps purchased using a different ID.
Similar Messages
-
I had my ipod touch 4th generation plugged into my sterio and i tried to swipe open my pinger app and now its stuck on the load screen for the app and wont do anything at all its frozen. How do I fix it??
Reset your iPod. Hold the power and the home button for 10 seconds till the iPod restarts. No data will be lost.
-
My iphone 4 got stuck while software update and now it keeps show the apple screen and then shut off
Hey everyone!
My iphone 4 got stuck while I was doing the software update to iOS 6.3.1 without using the computer (directly from the iphone settings) and now it keeps show me the apple screen and then shut off. I really don't know that to do and I would like some help, please!
thank you very much.Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I am trying to add my work email to my Iphone 3 and can't get it added....any ideas??
I am trying to add a second email/work email to my iphone and can't get it added...anyone have any ideas?
Talk to your IT department and make sure you have the correct settings.
-
I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?
You may be able to find your Apple ID at Look up your old and forgotten Apple ID
-
I'm trying to add a new mail account and it is stuck on discovering settings
Getting frustrated. I'm trying to add a new email account and now my screen is stuck on Discovering settings and it won't go any further and i can't read any previous emails that was set up on another account
1. What does this have to do with Remote Desktop?
Perhaps you meant to post in the iPhone forum? Using iPhone
I'll request the hosts move this to the iPhone forum.
2. What type of account are you trying to add? Gmail? Outloook.com? Corporate? Other Personal email?
3. CardDav is a contact or address book format used by some email service providers such as Gmail. It usually asks for the password for your email account. Setting it up as CardDav will usually only pull in contacts and not email. -
I have one of the oriignal IPOD's circo 2006. I've got about 150 tunes on it which has been fine but today tried to add another 200 or so and was advised I need about 848 MB to load them. Is there any solution. I have 2 playlists. One with the original 150 tunes and one with the addiitional 200 tunes. Thoughts as now my IPOD won't sync at all and I don't want to delete any of the songs if I don't have to.
How much storage on the IPOD - I have one that has 60GB on it. Also have an IPOD shuffle that held less songs.
As your IPOD does not have enough storage for all of your songs, you have to create a list to sync to it that does not exceed the storage size.
For instance my IPOD shuffle had its only list of songs that did not exceed storage.
The IPOD gets them all because I only loaded the songs from my CDs that I really liked into ITUNES - leaving out the ones I skipped over. -
After updating iOS 8.0, I only see a black screen on my iPad 4 asking for a 4 digits passcode, I've tried severeal times and now every time I try I get this message "Ipad dissable wait 60 min... I do not know what to do???
Howdy mendjes25,
It sounds like you’ve recently updated your iPad and now it’s disabled because the passcode you’re entering isn’t being accepted. I can imagine that would be frustrating. Take a look at the article linked below, it describes the alert you’re seeing and provides the possible resolutions for that issue.
iOS: Forgot passcode or device disabled
I hope this helps,
-Jason -
Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!
You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer
Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
I was trying to shut off my iphone 3gs and now it is stuck in shut down mode. How do I shut it down?
Try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
After the phone is started again, shut it off as usual. -
my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?
it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.
-
I Tried to update my iPad to iso7 and now all I get is a pic of iTunes and a USB plug. Help what do I do now
You have to connect your iPad to your computer now and restore the iOS software with iTunes. The update went bad. Read about how to do it here.
iTunes: Restoring iOS software - Support - Apple
Maybe you are looking for
-
Gaps between header/footer and main content
I am building upon a website that somebody else previously worked on. When adding to the main content, gaps appear between the header/footer and the content. How can I fix this? Code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "
-
Is there any simple way to close a group of PO's?
Hello All, I was looking an answer for my question on forum but didn't found anything which could help me to solve my issue. I would like to close a group of PO's in some period of dates. Is there any simple way to do this? I mean transaction for exa
-
Save Query - An error occurred while creating connection strings for the query
A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.
-
Can anyone guide me about this kind of error?
Hello, Seems today is the day of errors for me. Few hours back had an silly error with servlets, now its EJB :-). M having a web application in struts with EJB3.0. the error i'm getting is :- [[action]] Servlet.service() for servlet action threw exce
-
How to handle mouseClicked in JPanel
HI, My panel is fill with components, but I'd like to handle mouseClicked on whatever Component mouse have been clicked. I know that I could register each of component's MouseClick Event in one handler. But I think there is simpler way and beside tha