Tried to connect ipod to sound system via USB and asked to format. Pls Help
I have tried to connect my ipod to the dvd system via USB port. It asked me to format the ipod and i pressed yes and than instantly plugged the ipod out [realized what i did]. anyway the meessage on the scereen was that I had to connect it to the pc and itunes to resolve the problem. When i connected Itunes asked me to restore it. I know that if i restore than i will lose all my music. Is there is any other way to fix it?
Thank you very much I really appreciate your help.
Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.
Similar Messages
-
Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.
UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too. -
IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0
Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks -
I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.
Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing. -
I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".
Right click on your device icon on the left pane of iTunes and click on transfer pur....
-
I am getting no sound from my headphones. I've tried several headphones, did the whole system preference thing, and tried the option command reboot. Whats next?
I have tried all the above and nothing seems to work. Any other suggestions?
-
i have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g. What should I do now?
Just let the battery drain until the screen shuts off. When you charge it back up it should boot up normally.
-
but if i connect the same hard drive via usb it works fine is the hard drive faulty?
It sort of sounds like a startup disk issue. Have you tried starting up holding down the "Option" key? This should generally give you the option of which drive you want to boot from after a few seconds. Sometimes, especially if you had previously booted from an external drive (and it sounds as if you have) they system wants to continue booting from that drive. If it can't find it, it just sort of hangs there. Try holding down the "Option" key and see if your internal drive is shown as an option. If it is, select it. If you manage to get into the OS, go to System Preferences / Startup Disk and select the correct drive (even if there is only one drive shown, you should still select it).
-
Problems connecting to Wi-Fi network via 3G and 3Gs (due to modal view?)
I am trying to connect to a protected network via Wi-Fi using two different devices - a 3G (running 3.0) and a 3Gs. This is a corporate network and is only allowed to visit certain websites that are closed off to the outside world. I don't know the exact type of network configuration, but I am unable to connect to sites such as Google, apple.com, etc.
In both cases, when I choose the network in the settings app, I first see an activity indicator that clues me in to a connection being established. Then, after a moment a modal view slides up that is titled "Log In", and according to the text above the title it is going to http://www.apple.com As said above, if this is truly the case it would be a problem for me since I can't visit apple.com. So I see an error page served up by my network, and I am disconnected.
Why is this even going to apple.com? Is the modal view some kind of new feature? Is there anyway to disable it? Note that I am not having this problem using an iPhone 3G or iPod Touch using 2.2.1
Message was edited by: Brian PapaSun Mar 28 06:02:24 unknown Preferences[292] <Warning>: wifi handler: (null)
Sun Mar 28 06:02:27 unknown kernel[0] <Debug>: AppleBCMWLAN::setASSOCIATE() [configd]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_NONE, key = CIPHER_NONE, flags = 0x0
Sun Mar 28 06:02:27 unknown configd[22] <Error>: WiFi:[//////////////////>: Failed to associate with Internet: 5
Sun Mar 28 06:02:27 unknown kernel[0] <Debug>: AppleBCMWLANJoinManager::join(): No such network: "Internet"
Sun Mar 28 06:02:27 unknown Preferences[292] <Warning>: WiFiManagerAssociationCallback: err(5), err(00000005)
This is what I get on the Iphone configuration utility debug console. I edited out just a couple of numbers in case this is sensitive information the company wouldn't want me to share.
Message was edited by: F-22 -
IPOD WILL NOT WORK VIA USB WITH MY HOME TEATHRE
When I plug my iPod to my stereo via USB that came with iPod, stereo says no USB device connected and then after few seconds, it starts playing, although, iPod displays same screen as when synching with the Do Not Disconnect logo and cannot stop it from playing and when I disconnect it, I can't turn it off. This also happens occasionally, that I cannot turn it off.
Any help would be appreciate it.
You can also contact me at carlos_brewer (at) yahoo (dot) comDarkmonster620 wrote:
It says it'll work with "all" iPods...
When was the manual written? What constituted "all iPods" one year would not necessarily apply to iPods made later.
Throw away my iPod and get a new one?
I don't believe I suggested anything like that.
You might get better answers if you included the exact make and model of the home theatre system. You should also search the forums using the "Search Discussions" box to see if there are any other threads about your particular brand of home theatre. Also, did you ever check the support site or contact customer support for the home theatre and car stereo?
Best of luck. -
How can I share external devices connected to my Mac mini via USB on a wired network.
Own a Mac mini with Mountain Lion. Purchased the server app. The Mac mini is connected to a wired network with Mac’s and Windows machines. I have an external hard drive and 2 printers connected to the MAC mini via USB. I would like to share these devices with other computers on the wired network. Although I have attached similar devices with an airport extreme in the past, I am unable to use a wireless router in this case. Any suggestions on making this work with my current setup?
You don't really even need server app to do this. Simply go to System Preferences | Sharing and turn on both File & Printer sharing. Then, for example, the printer (not relevant what connection it has but obviously USB is fine) will be available to everyone on the wired network.
That's all there is to it - unless I missed/misunderstood something re: your setup which seems very straightforward. -
Hi,
I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
-ais-swissais-swiss wrote:
How to connect windows laptop (vga) to thunderbolt display?
AHHH??!!!!!! Was that your original question?? I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display. If THAT is what you're trying to do, then NO.... You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
I wonder why apple doesn't state this in their technical descriptions...?
-ais-swiss
Actually, the state that information all over the Tech Specs on the Apple Store website.
http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
Here are two different statements from that webpage:
So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices. -
Is it possible that iMac corrupts connected external hdd-s drive via USB?
Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed -
When my iPad2 is connected to Window 8.1 via USB to my Lenovo PC, I can not find Albums other than the Camera Roll. Is there a method by which I can make other albums visible to my PC? I am trying to copy them manually into a portable harddisk so all my photos and Videos in my iPad and iPhone will be backed up in one location for convenient access of all my photos & Videos.
Use windows Import utitlity is the only other way I do believe
-
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?
Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
Issue in conversion of output file from alv to csv file using GUI_DOWNLOAD
hi, I am using GUI_DOWNLOAD to convert the internal table that am getting as the output of an alv into a csv(comma separated file) file.I am using the following code but its not generating a csv file instead it is generating a normal space delimited
-
TS1410 My ipod nano 3rd gen. is not recognized by my computer or itunes. Support page does not help.
My macbook is not recognizing my 3rd gen. ipod nano after I reset the ipod. THe finder not itunes recognizes it. Can someone help?
-
Extend customer to multiple company codes and mutliple sales organisations
Hi, Customers with only general info. are getting created from CRM system to SAP ECC. Now we extend the same customer to differnt company codes and different sales organisations. When I checked the BADI, CUSTOMER ADDDATA, in this S_KNA1, S_KNB1, S_KN
-
How do I save document with different name
Since I updated my softwhere, can't seem to find how to "save as"....help!
-
AICS3 FreeHand like features. Are they there?
Is anyone using AICS3 yet? I'd like to find out if any of my favorite FH features have been incorporated. I sense the inevitable that all of us FH lovers will need to switch to AI someday. Can AICS3 do these things? 1) Option click a selected line, d