Tried to create new apple id & Server Error message
Earlier today I created (well tried) a new Apple id and the system returned an error message saying "server error" and the info I"d created disappeared. I thought perhaps it might have worked regardless of error message but it didn't.
I've just set up a new ipad and decided that rather than the one apple id for everything I'd like to have a separate apple id for icloud.
I also notice that where it displays associated devices the ipad is not showing (but two phones are) ... is there a delay or is there a problem with my apple id?
Thanks in advance for any info!
"You can only switch IDs to do this once every 90 days. If you haven't done any of these three things on the device yet, it is not yet associated with the ID."
So, this means that if the first apple id I used (for instance, say an id that would allow me to shop in a store that's in a different country)....but I just downloaded free app, and then log out and have no plans on using that id again.
Are you saying that Apple will not let me switch back to my preferred id for three months? Or is this just re iCloud?
Could this be related to the server error?
Where does one check to see when they can switch id's?
Similar Messages
-
I have an apple Id in face time but whenever I try to updates or instal application it denied and ask this id has not used in itunes store. How can I overcome this problem as my ifoneis useless without updates?I have also tried to create new apple id in itune stores but it asks to give detail of visa card or similar which I havn't. How I create apple id in itunes?
Click here and request assistance. That message means to contact the iTunes Store staff and not to post in these boards.
(96650) -
My antivirus scan secured a FakeAlert threat. Now, all emails from the past five years are no longer visible in my Inbox and are not in the Deleted Items folder. Any time I try to receive a new email I receive the following message:
"There was an error downloading the following message:
From: <sender>
Subject: <subject>
This message may contain a virus or there is not enough disk space. Skip this message?"
Enter No:
"Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox."
I have write privileges and 184 GB of free disk space. I recently deleted many emails and compacted my inbox. I cannot restore any files that the scan deleted because there are none visible.
I have contacted my antivirus software providers and they concluded that the problem lies with my email software. Can you please help?REmove all emails from the Inbox to other folders.
When it is empty do the next stage.
If you are using a POP mail account and have some emails in the webmail view that are missing in Thunderbird, you could get everything currently on the server downloaded again.
Make hidden files and folders visible:
* http://kb.mozillazine.org/Show_hidden_files_and_folders
In Thunderbird
* Help > Troubleshooting Information
* click on 'Show Folder' button
* '''close Thunderbird now - this is important. '''
* clickon 'Mail' folder
* click on mail account name
* Locate and delete these files: '''Inbox and Inbox.msf'''
* locate and delete this file: '''popstate.dat'''
* close the window - top right X
* restart Thunderbird
A new Inbox will be created.
A new popstate.dat file will be created.
It keeps a record of everything downloaded, as it is new and empty, TB will believe everything currently in server Inbox needs to be downloaded.
This will get everything currently in server Inbox back in Thunderbird. As you already have some emails, you may get some duplicates, but only the once.
I would not expect any emails are recoverable from the Inbox in Thunderbird because they may have been corrupted by either an unknown reason or by the antivirus program doing something with the file to make emails lose information, it is possible that when you compacted the file emails were lost. Compacting removes 'marked as deleted' emails, but if it didi not know where a marked as deleted email ended, good emails could have been removed due to the corruption.
In future, compacting should be done on a regular basis, but never compact a file/folder that you think may be corrupted. Getting the error message saying the file may be corrupted was a good hint that somethig was wrong.
Report back on results. -
When trying to download from apple store runtime error message 6025 comes up
when trying to download from itunes store runtime error 6025 comes up.i've tried uninstalling and reinstalling itunes,but that didn't work.any ideas anyone?
To change the Apple ID for purchases, go to Settings>Store>Apple ID, tap the ID show, sign out, sign back in using the ID you want to use.
-
Now everytime I try to finish the update process I get a message " Apple ID couldn't be created because of a server error. I already have an apple ID I am just trying to finish the update so I can use my ipod touch and can not figure out why I keep getting held back at this message
So I found out with alittle research that instead of entering all that info on my ipod, security questions, birthday, ect that it was much easier to just go to http://appleid.apple.com and place all that info there and save it than try the process on my ipod and it finished the update.
-
Contact iTunes Store Support error when creating new apple ID
This is for a business. We currently have a combination of over 150 ipads and iphones and will be adding another 20+ per month.
I am currently setting a quantity of ipads up for employees and preconfiguring them with their own itunes account. In this batch, I was able to set up the first 7 with no problems. On number 8 I keep hitting a roadblock with the message "Contact iTunes Store Support to complete this transaction". when I try to Create the Apple ID. I have had this problem before when I hit a limit (although I don't know what that number of ID's was).
These accounts do not have a credit card associated with them. To create them I am going through the route of being in iTunes with no user logged in. I go to the App Store and search for iBooks. Then try to purchase it which pops up the login/create account screen. I go through the screens adding the email address, password, security questions on the first data page. Then add none for payment options and add the address. When I click Create Apple ID I get that error message in the upper right corner.
On all of these accounts I am creating them with the same security questions, address and phone number. These devices are all based out of the same office so the address and phone numbers will be the same. I keep the security questions the same as it would be a nightmare tracking all of the different variations for hundreds of accounts. The only thing different between them is the username/email and the password.
It would be really nice if Apple gave a way to create apple ID's for business purposes in bulk instead of creating them one at a time. I will be setting up 20 new ipads per month for at least the next year.Looks like I may have found a work around solution to this problem. It appears that there is a flag or something on the computer that is not allowing me to create more ID's on that computer. As of this morning I was still unable to create any more ID's from that system.
I tried creating the same ID on another computer and was able to with no problems.
This does lead to a problem as I am setting up 20+ new ID's a month and typically work from one computer to do so.
I really wish that Apple provided a way for companies to create new Apple ID's in groups using a batch process instead of creating them one at a time. Or at least allowed you to create a new Apple ID with no credit card associated during the configuration process of the ipads. -
Error while creating new Apple-ID
Hello, while creating a new Apple-ID the message "..to comlplete please call the support" was shown, can anybody help where to call. The "Apple Telefone Support said "sorry we cannot help"
Looks like I may have found a work around solution to this problem. It appears that there is a flag or something on the computer that is not allowing me to create more ID's on that computer. As of this morning I was still unable to create any more ID's from that system.
I tried creating the same ID on another computer and was able to with no problems.
This does lead to a problem as I am setting up 20+ new ID's a month and typically work from one computer to do so.
I really wish that Apple provided a way for companies to create new Apple ID's in groups using a batch process instead of creating them one at a time. Or at least allowed you to create a new Apple ID with no credit card associated during the configuration process of the ipads. -
Error while trying to create new assignment with supervisor through API
Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best RegardsI think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help? -
Apple ID couldn't be created because of a server error when i try to restore from a backup
Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud?
Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud. -
i have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?
The internet is the internet. if its not working then its something to do with your not allowing cookies from apple's site or they are having issues.
-
Apple Id could not be created because of a server error?
I just upgraded to ios6 and it asks me to login to my apple account but I keep getting the "apple id could not be created because of a server error." message. Did my upgrade go badly or am I not alone?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Cant sign in with apple id - error message "apple id couldnt be created because of a server error"
Cant sign in with apple id - error message "apple id couldnt be created because of a server error". Is there something wrong with apple id or apple server?
I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud. -
How can I reset my security questions? Everytime I try again like thousand time all I get nothing. It won't appear my mail. I tried create new Apple ID but I don't have card to buy. I only have iTunes card. I was think about drown my phone in toilet
Contact Apple support at 800MYAPPLE and ask them to assist you with resetting your security quesitons.
They will ask you to verify your identity. Not usually a big issue. Call them ask for assistance.
They can walk you through getting the security question issues resolved.
Good luck. -
Error when creating data model - Internal Server Error
When trying to create a new Data Model in BI Publisher (11.1.1), we are getting a “Internal Server Error” message and the page to create data models wont display. We are able to login to BIP with any user, but we cant do anything else… (seems due to a null pointer exception, as shown in this message):
+[ServletContext@605092857[app:bipublisher module:xmlpserver path:/xmlpserver spec-version:2.5 version:11.1.1]] Servlet failed with Exception+
java.lang.NullPointerException
We’ve examined bipublisher.log and we get several warnings:
Component: AdminServer
Module: oracle.xdo
Message: SawUtil.setUserHome - Unable to lookup user home: weblogic
Component: AdminServer
Module: oracle.xdo
Message: java.rmi.RemoteException: access denied for user to path /users/weblogic.; nested exception
Then, we get this errors in sawlog0.log:
Component: OBIPS
Module: saw.soap.catalogservice
+Message: Invalid path () --+
File:webcatalogsoaphandler.cpp
Line:877
Location:
saw.soap.catalogservice
saw.SOAP
saw.httpserver.request.soaprequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
AuthProps: AuthSchema=Impersonate-soap|IMPERSONATE=weblogic|NQ_SESSION.AUTHINITBLOCKSONLY=******|PWD=******|UID=BISystemUser|User=weblogic
ecid: e7cc62fc411b9afe:30699382:1389a0e0d36:-8000-000000000000257b,0:4
ThreadID: 4180
This same error repeats for files webcatalogsoaphandler.cpp and localwebcatalog.cpp.
Access to SOAP is explicity granted to BISystemUser (via Manage Privileges ) and we haven’t changed any security policies…
Any ideas why this is happening and how to solve it?
Thanks in advance.
Regards
Edited by: user8021127 on 19-jul-2012 1:12Did you find a solution to this?
-
AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
IanThis may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/
Maybe you are looking for
-
Dear experts - I am a novice to bw and if someone could share their ideas regarding the following, I'd be very thankful. I have activated a process chain and tried to execute it. This is a onetime execution and is not dependent on any event. When I t
-
"No airport card installed" after 10.5.3 Update
Hello everybody, after an obviously successful update to 10.5.3 on my MacBookPro the system doesn't recognize the integrated airport card anymore. Reboot or anything else doesn't solve the problem. Getting online is not longer possible via airport. D
-
ALV Programming and Sapscript...
Hi, Till date i have only worked in standard reports, now i have to work on ALV report and Sapscript, so if any one have any basic tutorial on ALV and Sapscript, pls email me. Thanks in advance.
-
DMP-4400G How can I change the local time
Hi, Recently I installed DMS 5.0.2 and DMP-4400G for Digital Signage. Now I am running a Flash application that is embedded into a HTML page, but sometimes the DMP does not show the content of the flash, the LCD shows a temporary error; this error ne
-
SCSM Review activities watched by SCO Monitor Object Review Activity
Hi, I'm monitoring the Review Activities with Status equals Pending and Title contains [Set_ ...] (see pic) Now the runbook starts and when I've a look at the log I see it starts on: So the Status Filter is used (I've tested this), but the Title Filt