Tried to download evaluation software, not working
After approximately a half an hour of downloading of NI LabVIEW Evaluation Software it faild to unzip, and I couldn't get it running.
I just tried the same thing and it worked fine on my machine. Did you make sure you downloaded the correct version? I'm running Win 2000 and downloaded that version. You may also want to try reinstalling your zip utility. Maybe that's the problem.
J.R. Allen
Similar Messages
-
Trying to download McAfee Software, Not supported???
McAfee found that your Operating System is a Unsupported Operating System You are attempting to download an Ubuntu Linux application to an operating system other than Ubuntu Linux. To download this product, you must download from a computer using the Ubuntu Linux operating system. Why?
OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
The most effective defense against malware is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of trojans, which can only work if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown site, merely in order to use the site, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
“Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Disable Java (not JavaScript) in your web browser(s). Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those versions has bugs that make it unsafe to use on the Internet. Those bugs will probably never be fixed, because those older operating systems are no longer being maintained by Apple. Upgrade to a newer version of OS X as soon as you can.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else. -
I have some problem .i update my iphone3gs software .software downloaded now its not working .warning select network connect to itunes ..please help me
please help me ?
-
The download function is not working....!! I don't use any add-ons like idm or dap,etc.... When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads... I am currently using Firefox 7.0.1....... Nothing is being downloaded, and I am forced to use IE8 for everything... I even tried re-installing, but doesn't help... I am using Windows 7
TonyE is correct the plugin version comes with Adobe's Reader X.
The failure in communication is two parted:
1. Reader X is not Acrobat (Mozilla Plugin Checker)
2. Acrobat is not mentioned in the Reader X download Page (Adobe)
therefore confused clients.
For readers '''CAUTION''' check the minimum requirements for Reader X.
Here: [http://www.adobe.com/products/reader/tech-specs.html Adobe's Reader X requirements link]
Do not waste the time to download (80+MB and Site is Slow) if your machine does not have the resources to execute it. ie. '''aging''' Hardware
Unfortunately the Adobe DLM only checks the requirements after it has
downloaded BEFORE the install occurs.
This is '''very expensive''' for both the sender and receiver
It might be why they called it READER X and READER 9 will not sense an update...
Another Software company pushing Hardware antiquity... -
Ipod/Itunes/Ipod software not working :[
Okay, to start off..
-Ipod
My ipod is not working anymore.
When i try to put songs onto it..
It says they go on succesfully..
But when i unplg my ipod..and try to listen to it..
It says there aren't any songs on it.. :[
Can anyone help?
-Itunes
My computer won't let me download Itunes..
I start to download it..
but right when it gets close to the end..
It stops..
And says "Installation Interrupted"
Does andone know how to make it work?
-Ipod software
The same problem occurs when trying to download the software
As itunes."Okay, to start off..
-Ipod
My ipod is not working anymore.
When i try to put songs onto it..
It says they go on succesfully..
But when i unplg my ipod..and try to listen to it..
It says there aren't any songs on it.. :[
Can anyone help?"
This Apple knowledge-base article may help address that issue.
Strange iPod behaviour.
"My computer won't let me download Itunes..
I start to download it..
but right when it gets close to the end..
It stops..
And says "Installation Interrupted"
Does andone know how to make it work?
-Ipod software
The same problem occurs when trying to download the software
As itunes."
Check your firewall settings and any anti virus software you have (especially if it's McAfee). Try with these off. -
Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 > " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
IP_ADDRESS: The IP address for this unit
IP_SUBNET_MASK: The subnet mask for this unit
DEFAULT_GATEWAY: The default gateway for this unit
TFTP_SERVER: The IP address of the server to fetch from
TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
TFTP_MACADDR: The MAC address for this unit
FE_PORT: 0= (default), 1
FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
5=Auto (default)
TFTP_DESTINATION: The flash destination device for the file
flash:(default), usbflash0:, usbflash1:
Command line options:
-h: this help screen
-r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick -
Download lightroom - download button is not working
Unfortunately my laptop was stolen and now that I have a new LPT, trying to download lightroom again. Went to the adobe website but the download button is not working. Also checked support online. It said to right click the button and select open in new window. Tried that too - no luck. Anyone have anyother advice.
Troubleshoot Adobe Download Assistant
Mylenium -
I download IOS 7 I'm really dissapoint because my FaceTime and iMessage is not working.I tried turn off but is not working.:(
Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
Microsoft ADK download link is not working on microsoft site
Microsoft ADK download link is not working on microsoft site
None of the links I have tried have the download.
Googling for the right link does not help, Microsoft seem to have removed the download. I have tried many links
Does anyone know where I can get this?http://www.microsoft.com/en-us/download/details.aspx?id=39982
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or MVPs.
Twitter:
@alexverboon | Blog: Anything About IT -
Beats Audio Control Panel software not working after Windows 10 upgrade.
Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?
Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.
-
My I pad 1 sometimes while watching working switches off and go back to home page ... Why ? Also I need to know how I can upload my photos and pictures from laptop to my I pad. I tried thru I tunes but not work.
Satmar wrote:
My I pad 1 sometimes while watching working switches off and go back to home page ...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...
Satmar wrote:
Also I need to know how I can upload my photos and pictures from laptop to my I pad.
See Syncing photos to devices
Here > http://support.apple.com/kb/HT4236 -
I'm trying to download security software for my Mac Pro and it won't download. Even when I click the icon that says "if your download doesn't start click here" and still nothing happens. I have tried different types of software and nothing will download.
Are you not able to download anything at all?
I don't know what "security software" you're trying to download, but the chances are overwhelmingly good that you don't need it, and it's likely to do more harm than good. -
Adobe download assistant will not work on my machine?
Adobe download assistant will not work on my machine. When i try to start it i get a message saying "Sorry an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance." Any ideas what to do
Are you using Mac OS? If so please try removing the Adobe Download Assistant from your Applications folder and try again. This issue is documented in the Known Issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html.
-
Multi scanner software not working after E71 FW U...
Multi scanner software not working after E71 FW Update to 3.1
Nice bit of trouble-shooting. Thanks for sharing the final solution.
-
when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I need help please if you can aid me in my quest to write this code
I am trying really hard to accomplish this and my head hurts from trying mulitple ideas on the right code.A lottery requires that you select six different numbers from the integers 1 to 49. Write a Java program that will do this for you and generate
-
my ipods broken so i cant get on it. im trying to sell it so i need to restore it to facotory settings so when the screen is fixed all my stuff wont be on the ipod.
-
i use an uncategorised packet data connection to log onto the net on my 5230 and when i try to use maps i can't sign in my account it says connection failed please try again, but when i use google maps i can log in, help i'd really rather use ovi map
-
ERROR 2009-05-24 08:46:36 CJS-00288 Could not update database statistics.
Hi all. i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error ERROR 2009-05-24 08:46:44 CJS-00288 Could not update database statistics.<br> DIAGNOSI
-
Slideshow in iPhoto11 using iMac with mountain lion OSX10.9
I have made a slideshow in iphoto11 and exported it. Went into imovie11 and selected import. The slideshow was imported to events. How do I burn this slideshow to a DVD. I need to go to mediabrower but it is grey. I can export the photo album to