Tried to download iOS 8 but failed and now phone won't go on stuck on plug into I tunes screen
Trows to download iOS on the laptop but said failed and keeps failing but phone won't do anything now stuck on plug in to I tunes help please
hey guys I was in the phone to apples for over hour and a half and he couldn't fix it, so I took it to my local stormfront shop and he plugged it in and it restored straight away and had the iOS 8 on it, it's very common he was telling me and sometimes windows interacts with the download for apple updates and causes the phones to go into basically limp mode, best to plug in to an Apple Mac etc
Similar Messages
-
Downloaded IOS 8.1.3 and now phone will not switch on or charge
I updated my Iphone 5c with IOS 8.1.3 and now it is in recovery mode and will not switch on or accept a charge for plug in , battery or car charger.
HELP !Hello brianjohnwatt,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that should help you resolve the issue with your iPhone 5c not turning on since updating iOS.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Take care,
-Jason -
Tries updating iPhone 4S with iOS 6, update failed and now phone stuck on itunes logo
So i tried updating my iPhone last night to ios 6. Soon after the update began, iTunes said an error occurred and the installation stopped. now my phone is stuck on the itunes logo with a usb plug under it. I have tried everything i know of. turning the phone on and off/trying the reset thing with the power/home button does nothing. plugging into the wall does nothing. when i plug the phone into my computer, the sound of a device being connected happens, but iTunes does not recognize a device. no message pops up about a device in recovery mode or anything. I uninstalled then reinstalled everything apple-related, did not fix the problem. I'm not overly tech-savvy, but if anyone has any suggestions, lemme know please. ive spent well over 5 hours trying to fix this thing to no avail
OK i figured it out. you have to put it in DFU mode before itunes will recognize the phone.
instructions: http://www.iclarified.com/entry/index.php?enid=1034 -
HT1349 I tried to download iOS6 to my 3gs and now it won't operate.
serial #:850271MJEDG.
if your phone is recognized on another computer, you should follow these steps:
http://www.apple.com/support/iphone/assistant/itunes/
Good luck -
I just downloaded iOS 6 because I hadn't downloaded that one yet then once that is downloaded i tried to download iOS 7 but my settings keeps saying that I already hav the latest update but my update is only iOS 6 not 7 so I was wandering how to get iOS 7 to download onto my iPod
iOS 7 not compatible with 4G iPod
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory. The 4G iPod only has 256 MB -
HT1430 I am trying to download IOS 6 but it is not completed , always showing error
I am trying to download IOS 6 but it is not completed , always showing error
I had the same problem after I gave my old iPad to my parents and tried to install Netflix. This is what you have to do: Open iTunes on your computer, the one you sync your iPad to. Then go to iTunes Store and search for and download Netflix app. After you download it, if your iPad is set to download new purchases it may start downloading on your iPad. If so, tap and hold to delete the app (because it is trying to install the new version on the iPad) Next step, go to the App Store on your iPad and find Netflix and it should say install since you already purchased it on the computer. Tap to install, and it will say the version is not compatible, tap to download a previous version. Click that and it will install the older version! One more thing, if and when you sync to your computer again it will say something like " Unable to install Netflix on your iPad" Just click the box to never remind you again, because it's trying to sync the newer Netflix app to your iPad, but it doesn't work so it displays the message. The old app will remain on the ipad. Hope this helps, good luck
-
I tried to download tI tried to download iOS 7.0.4 and have been stuck on a screen with iTunes logo and up arrow and a picture of charger plug. It has been this way for 2 hours. Help??
doreen329 wrote:
... have been stuck on a screen with iTunes logo and up arrow and a picture of charger plug. .
Your Device is in Recovery Mode and needs to be connected to the Computer you Usually Sync with.
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I was downloading Mavericks. Internet failed and now can't resume
I was downloading Mavericks. Internet failed and now can't resume.
I´ve tried several times and it says "OS X Mavericks failed to download"/Use the purchase page to try again. I went to purchase page but is impossible to resume.
Could you help me please?Whatever you do, DO NOT REFORMAT THE DRIVE. You can just get a small <500Gb EXTERNAL bus powered drive, dismantle it and follow the instructions above. If you already have one then that's even better.
The drive I'm showing here is the drive that used to be inside of my computer. It took apart an old 320Gb seagate drive. The connections on these drives are all universally interchangeable. They just add some circuits and a USB (or other) interface. I would just get the cheapest drive that you can get that is for laptops and looks simple to take apart. (This is almost exactly the drive that I did this too http://www.amazon.com/Seagate-FreeAgent-Portable-External-ST903203FAA2E1-RK/dp/B 001FWIE0K/ref=sr_1_56?ie=UTF8&qid=1343340447&sr=8-56&keywords=seagate+external+h ard+drive)
The "old internal" drive should still be able to allow you to install ML on the "new" drive as long as you tell it to. It sounds complicated, but it's really not once you get in there and start doing it. It was actually quite easy. -
my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?
it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.
-
I just downloaded ios 6.1.2 and now my iphone 4 wont hook up to a charging device
i just downloaded ios 6.1.2 and now my iphone 4 wont accept a charging device there is no error message, there is no little lightening bolt in the battery icon to show its charging, i have tried several cords and several wall outlets and hard rebooted my iphone several times and still it wont charge. if there is anybody that can help me it would be greatly appreciated.
I believe what is happening is that when charge gets below a certain level (maybe less than 5% remaining), the indicator stops properly functioning. I'm experiencing this issue on both my iPhone and iPad and if I leave them plugged in, eventually they start charging or showing that they are charging. I'm traveling so this is the first time on 6.1.2 that my devices have been below 10% since the update. I bet in the last update, to appease those with drain issues, the battery charge indicator was manipulated much in the same way the celluar bars were several years ago for those who where "holding" their phones incorrectly.
-
i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
Recently downloaded ios 8.1.2 and now my wifi button will not slide to on and I also cant use bluetooth and icloud any ideas on how to fix this?
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?
What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
Regards
TD -
Updated my iphone 4 with iOS 6 latest updates and now phone has froze.
Updated my iphone 4 with iOS 6 latest updates and now phone has froze. Now cannot log on and have a flashing apple sign on my screen. What can I do?
Delete then add back the exchange acct on each device.
-
MacBook Pro was having Finder/Freezing issues, Tried restarting and now it wont reboot. Been stuck at the apple logo/loading screen for over an hour.
Step by Step to fix your Mac
Create a data recovery, undelete boot drive
Maybe you are looking for
-
A friend of mine has an iPhone with a cellular data plan, a Macbook Pro, and a mini-iPad. She's been using Facetime, but says that all of the devices used to ring at the time of an incoming Facetime call. Now only her iPhone rings. How do you set
-
Grouping of clips are not saved
I am working with PPCS4 coming from CS2. When editing I group files very often, it is very convenient to moves several clips. With CS2 the grouping of the clips were saved and I found them when reloading the project. With CS4 this grouping is lost. I
-
Itunes 10.5 can't open 2nd time on windows 7. Logging off and on again helps, but ...
After having installed iT 10.5 on Windows 7 iT starts without any problems. After quitting iT however, it cannot be restarted without logging off and logging on again. Anybody have a solution/fix ?
-
Hsperfdata_uid not getting created
Hi, I am trying to use jstat and jmap utilities to get the snapshot of the jvm. It is working fine in dev and staging env but it doesn't work in production. All three on linux. The error is could not find jvmId. The main difference i found is that th
-
After reading this thread please do not just disregard me as being a forgetful muppet! I setup file sharing and printer sharing between my iMac and my Mac book Pro (both using OSX 10.8.2) and had much success in doing so. Now however, i am only abl