TRIED TO DOWNLOAD SOFTWARE ios7.1.2 TO MY IPAD. iPAD FROZE ON THE APPLE PICTURE AND WONT TURN OFF OR RESPOND AT ALL.
TRIED TO DOWNLOAD SOFTWARE ios7.1.2 TO MY IPAD. iPAD FROZE ON THE APPLE PICTURE AND WONT TURN OFF OR RESPOND AT ALL. IPAD MAY NEED MORE FREE MEMORY FOR THE NEW SOFTWARE BUT HOW DO I FREE UP MEMORY IF THE IPAD IS FROZEN. CAN THIS BE DONE ON iTUNES OR THE APPLE SITE?
Took my iPad to the Apple store today and they were able to unfreeze it with a simple forced reset. This is done by pressing the Off button at the same time as you press the button on the front and hold for about 20 seconds. The new software had successfully installed and the iPad had frozen when it was starting up again after install. Not sure why this simple process can't be part of a FAQ page on the Apple site.
Similar Messages
-
while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?
Try here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain. Then charge for an hour and try again. -
my Ipad is not charging, it started after the battery died while i was playing a game, when i tried charging its only flashing the apple icon and it switches off again, help PLIIZ
Not charging
1. Reset iPad
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
My iphone 4 got stuck while software update and now it keeps show the apple screen and then shut off
Hey everyone!
My iphone 4 got stuck while I was doing the software update to iOS 6.3.1 without using the computer (directly from the iphone settings) and now it keeps show me the apple screen and then shut off. I really don't know that to do and I would like some help, please!
thank you very much.Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I tried to restart my phone but it is stuck and wont turn off
My phone didnt want to sync, I was getting a message that Itunes was unable to sync data, so restarted the computer and I got same massage. Then I tried to to restart the phone but it has been 15minutes and still wont turn off. Please help!!!!!
Hey Hollyw0od99,
Thanks for the question. I understand that you are experiencing issues with your iPhone. The following resource may provide a solution:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks,
Matt M. -
my ipod touch power button is pushed in and wont let me turn it off. i unplugged my usb and tried to go into recovery mode but it just wont do anything..just keeps saying ipod disabled connect to itunes.but it wont even open cause its locked.how can i fix this
- Try placing the iPod in recovery mode using this program and then restore
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next let the battery fully drain. After charging for an least an hour try the above again. -
I tried to update the latest version for the iPod touch and it couldn't complete the install. my iPod screen had the apple icon with the progression bar when it couldn't update and it stuck there. iTunes doesn't recognize my device.
How do I restore, if iTunes doesn't see my iPod?Plug your device into iTunes. Hold the home & sleep buttons at the same time. After 10 secs release the 2 buttons. iTunes will tell you it's found a device in DFU mode. The iPod screen will stay black. At this point do a restore. If you see the Apple logo you have held them for too long.
-
Im having problems to use Airplay for games from my iPad[1] on to Apple TV, but I do get the sound. my iOS is operating on 4.3 and later.
You need an iPad 2 or later in order to mirror.
-
Trying to download software that was written for windows
I am trying to download software that will enable remote access for security cameras. The software was written for Windows XP and Vista. Is there a program I can download other than parallels that will help me open the software?
Running Windows:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it. -
Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help
ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808 -
i have a ipod touch and im trying to update it to the ios 6 and its turned off and its saying connect to itunes
What happens when you connect the iPod to your computer and restore via iTunes?
iTunes: Restoring iOS software -
okay so I have a ipod clasic and its around 6 years old ,I havent used it for more than 4 years old and i tried to turn it on but it wont turn o. I connected it to my mac and it shows the apple sign but doesnt turn on i tried pressing the hone button and the pause one together and now it says disk mode but once its out of the disk more it goes back to the apple sign and wont charge.help.im confused!!
Hi nupurfromcali,
Welcome to the Support Communities!
The articles below may be able to help you with this. Click on the links to see more details and screenshots.
iPod only shows an Apple logo and doesn't start up
http://support.apple.com/kb/TS1399
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Cheers,
- Judy -
My ipod keeps showing the apple logo and it goes off then back on, i tried restoring it but it doesnt let me of some error code 3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore -
I have the original iPad- about 18 mod old. I tried to download an etool program and it required iflashplayer. My iPad wouldn't do it. I went to the apple store and they told me to update my software to iOS 5.1.1 which I did . Now none of the apps I had installed prior to this work. The icons are still on my screen but when you touch them, it just blinks and nothing happens..like the screen is frozen. How do I restore all of these apps and favorites that I had on prior to this update? Please speak in very non- tech terms if possible. I am VERY low tech unfortunately!
Welcome to Apple Communities
You must use iTunes. Connect your device to your computer, open iTunes, select your device in the sidebar and press Restore. Then, you can restore your device from a backup, and sync the device with iTunes to transfer your files to it pressing Sync button -
Hi- I am trying to download music from my computer to my ipod. I have an itunes account and the music is on the computer but it won't go to ipod, it keeps telling me I need to download an upgrade but the upgrade does not complete itself and after like 2 hours displays an error sign. How do I fix this so I can get the music to my ipod. Both ipod and computer(toshiba, windows 7) are brand new. Help!! I am not technologically smart!
I suspect that you are saying that you can't download/install the latest version of iTunes.
All I can say is try removing and reinstalling the Apple software using the following:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
If you have further problems with installing Itunes I suggest you post in the iTunes forum since you have an iTunes problem, not an iPod problem. Also report the wording of any error messages. What they say is importent on resolving them.
Maybe you are looking for
-
J2IUN only showing PLA Amount balance all NIL
Hi, We are in the implementation phase. IN J2iun, only PLA amount is displayed wheras all others are showing 0.00 Can u suggest what cud be missing in that. I searched forum for similar posts and it says extract register from J2i5, and I did that but
-
Dynamic Text and changing Text in AS3
I have a Dynamic Text box in my Library. I drag it to my main stage and give it a name..it is now a movieclip. The name is 'mcAdmin'. I added an event listener for MOUSE_OVER. I want the text to change color, but for now I'm just trying to change
-
I have a Java program problem, it's unstable and losing connection and freezing. Will an upgrade to Lion from 10.6.8 help? thanks
-
Hi Guys, i am facing this issue from last 1 month can anyone please give me a solution i am wrintin the lastdate file with month like OCT 2010 by doing this am not getting any results in score card comparison chart, i f i change that to month end d
-
Problemi con rimozione partizione
Salve a tutti, ho due partizioni, su una installata 10.9.4 e sull'altra 10.10 beta 4, vorrei eliminare quest'ultimo perché ho bisogno di più spazio. Ho provato da utility disco a cancellare Yosemite ma non riesco, nel senso che con il pulsante - non