Tried to install new version of itunes and getting r6034 error code
This morning I tried to download and install iTunes Version 11.1.4. I'm getting a R6034 error code RUNTIME ERROR when I go to the "install" phase. I've already de-installed my old version so I know I've not got any files kicking around. I even went as far as purchsing PC CLEANER PRO to try to fix the R6034 error code and it's not solving it. I have the new version sitting in download mode but I'm not able to install it. I get part way through the install and the error code window pops up again. Any suggestions?
The third party cleaner may have been a bad move... It might make the following harder.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Similar Messages
-
Installed newest version of Itunes and get an error message when trying to launch
downloaded and installed newest version of itunes twice, when i go to launch it says the following error messge "the ordinal 2551 could not be located in the dynamic link library CoreMedia.dll"
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
Can anyone help me? Thank you. EFS1Hello DrJMDDC,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario -
When i try to download the new version of iTunes, I get an error message saying the download was for 32bit and I need the 64bit. How do i download 64bit?!?!
Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe? -
I just installed new version of iTunes when I go to sync iPhone 5 keep getting error oxe8000084&oxe800002d is there a solution to this?
Try this for Windows 7 (64 bit),
Close iTunes - Go to Task Manager – Click the “Services” tab - select “Apple Mobile Device” - left click and choose “Stop Service” - wait a few seconds - left click and choose “Start Service” - wait a few seconds - open iTunes - connect your iDevice.
Did it work? -
Please help as I am trying to reload new version of Itunes. I have followed all advice I could find in removing apple files and itune files etc...Now when I try to download it asks me if i want to save itunes setup_exe and when i select that option I get a message that says could not be downloaded. Any help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on anoterh computer to help determine if you have an iPod or computer problem.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
attempted to install newest version of itunes and now get 'runtime error' program: c:\program files (x86) r6034
Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I am trying to update Photoshop & Premier Elements 11 and get this Error Code: U43M1D207
I am trying to update both Photoshop & Premier Elements 11 and get this Error Code: U43M1D207.
Can anyone help ?Try downloading the updates manually from http://www.adobe.com/downloads/updates/
Thanks
Nikhil -
Tried to install newest version of iTunes and I'm getting runtime error R6034
Trying to install the new version of iTunes I am getting the following message from Microsoft Visual C++ Runtime library:
Runtime error!
Program: C:\Program Files\iTunes\itunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application support team for more information.
and the installation fails with Error 7 (Windows error 114).
I already tried uninstalling iTunes, Apple Software Update, Apple Mobile Device Support and Bonjour. Rebooted and tried to installed iTunes from zero, but I keep getting the same error.
I will appreciate any help with this issue.
Thanks in advance!Hi htlara,
Thanks for visiting Apple Support Communities.
If you see the error "iTunes was not installed properly. Please re-install iTunes. (Error 7)" the troubleshooting steps in this article can help:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
All the best,
Jeremy -
when I try to load a new version of itunes on my windows XP pc I get a message that file MSVCR80.dll is missing as well as a windows error 126 message.
any idea what to do?Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Can't install newer versions of iTunes and can't un-install current version
HELP!
That's a good start to my first post I think lol... hey at least I'm still laughing, even though I feel like crying!
I am having (probably similar to many from what I can see from this forum and also from google search) problems updating my iTunes to the latets version.
Whenever I start to install the new version I get a message pop up saying that iTunes64.msi can't be located, even though it does exist in the default filepath it throws up anyway.
After doing some Google searches I saw that a way around this might be to use the Windows Unintaller Utility, however, I have yet to actually find this utility, particularly as Microsoft now appear to have removed all traces of it from their site as it seemd to be causing other issues.
Next I found an article on Apple that said that if I am having the problems that I have stated above then I should unistall various apple software items in a particular order with iTunes being the first on the list.
This is where I am now stuck! I can't un-install iTunes from Control Panel as it says that it isn't installed! Of course it is installed, however, it would appear that something somewhere is corrupt and it doesn't actually think it is really installed (I think my PC is suffering a sual personality... maybe that's what dual core really means lol).
The corrupt nature of my iTunes installation would also seem to be borne out by the fact that the icon in the list of installed programs for iTunes is not the normal icon but a blank (unrecognised) icon.
I am now clean out of ideas as I can't do any of the "normal" things to remove and re-install iTunes and so I could really use some help/advice.Hi Katrina
Thanks for confirming my suspicions on the use of (or rather not) of the utility on Windows 7.
I also tried as you suggested to run the iTune64.msi file from it's location... it almost looked like it was working but then came up with the usual message saying it couldn't find the .msi file.
I even tried copying the file to another location but it still hit the usual error
I have a horrible suspicion that I am not going to get this sorted short of doing a complete re-install of my OS (which I don't fancy doing, particularly as at least iTunes is functioning anyway).
I am already planning to move away from Windows PCs and move onto a Mac in the very near future, so hopefully in the intervening time Apple won't release a critical udate to iTunes that means I need to update to continue certain functionality.
Roll on Mac-Day for methinks
Of course if anyone else can think of any solutions for me to try in the meantime then I would be more than grateful to hear from them and to give it a whirl. -
Installed new version of iTunes and now my library is gone.
I installed the latest version of iTunes when I got a prompt on opening iTunes. When the installation was complete, all of my music was gone. I found my library and thought I imported it to my library correctly, but every time I quit iTunes, the next time I open it, I get a library window with only a few songs in it. I have to reimport my itunes music folder. This has happened several times. I'd like iTunes to open with my entire music folder laready in it. Please help.
This may help.
http://docs.info.apple.com/article.html?artnum=301895 -
All music crackles on Windows 8 after Itunes update on 04 Jan 2015. Help!
There is an alternative downloader for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the playback issues that some users have been reporting with the full 64-bit version (the alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer). The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using:" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio. -
How do I get around this? The iPad one has the most current iOS allowed for the 1st gen per settings.
Help!this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...
Maybe you are looking for
-
Unable to Access Company LAN via VPN
Hello, I have a ASA 5505 that I have been using to test run the IPSec VPN connection after studying the different configs and running through the ASDM I keep getting the same issue that I can't receive any traffic. The company LAN is on a 10.8.0.0 25
-
Getting wrong values from modbus slave
Hi, I'm trying to get data out of a lumel na5 digital meter. The device is connected via its RS485, through a RS232->RS485 converter to the RS232 port of the PC. I've donwloaded the NI modbug library, and was able after some work to communicate with
-
ITunes doesn't open after the first time
Hi, my iTunes after the last upgrading doesn't open. Really it open the first time after starting pc then , when i shut down it seems frozen. Could you help me? Do you ave a solution?
-
Increasing Size of Mirrored RAID
Hi All, I had a mirrored RAID set up with 2 500GB, and one by one rebuilt that with 2 1TB disks, but Finder and Disk Utility still report the logical drive as only 500GB. How can I get the system to recognize the extra space? Bartram
-
How to organize the content of MANIFEST.MF
Most of the jar files contain a file named META-INF/MANIFEST.MF, and it provides some information about the class in the jar files, but when I execute the code below, I can't output all of the jar file name in the eclipse project's classpath. import