Tried to perform a phone backup several times but it just don't allow me to do so :(
Tried to perform a phone backup several times but it just don't allow me to do so
Hi patrick1661,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to back up your iPhone to iTunes, but are not able to. Did you receive an error message or other alert?
You can find the solutions for several common iTunes errors at this link:
iOS: If you can't back up or restore from a backup in iTunes
Best Regards,
Jeremy
Similar Messages
-
i cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 this install to complete cannott run. Please contact your service vendor?.. Please what can i do?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
'''My Yahoo Toolbar has disappeared'. I tried re-installing it several times but it just won't appear in the Toolbar space. I looked in the Toolbar view and it is checked. I even tried unchecking and re-checking the Yahoo Toolbar view. No luck. Please help. I use that toolbar constantly.''
Could be. They're in the midst of updating their servers at the moment so expect the odd mishap now and again.
Oh, and could you click the "Solved" button so that it takes this thread out of the loop?
Thanks. -
Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite -
I was using my Macbook when it suddently shut down, I was updating the operating system so I had the charger on even though there was still 90 percent of energy. I tried to turn my Mac several times but it doesn`t turn on, also the green light of the charger is not working, it`s looks like the charger is dead too. What`s wrong with my Mac?
Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
So I Just Got My Iphone Back From The Store Fixing It , And I Just Got It Back In 4 Months , And As Soon As I Got It I Had a passcode i put on it and i tried to many attempts and it was disabled for 60 minutes , after the time was up i tried again and now its disabled and says connect to itunes , can someone please give me some brief instructions please i really want to get my phone unlocked!
put it in recovery mode as explained here:
iOS: Unable to update or restore -
Tried to reinstall sapnw7.01 trail several times but sapdb\NSP not created
*Hi everyone
I have been trying to install sap netweaver7.01 trail without any success, First time the directory C:\sapdb\ was created and database was installed. Because of the problem that i have, i had to unstall the sapnw trail but when trying reinstall sapnw trail that directory does not created, what maid be problem and how to fix it?
Database management system is looking for that directory to start and can't find it.
Also i have problem with the disp+work.exe starts and then ends after a few seconds?
ThanksHi,
Try creating that folder structure and proceed with installation.
Regards,
Suneel -
I cannot open any tabs on Firefox. It opens to my homepage, but there is no line for a URL address. Therefore, there is no way to type in a new URL address. I have uninstalled and reinstalled Firefox twice and it has not helped. I am a former PC user and just switched to Mac.
Try restore as new using computer iTunes.
-
There is not much else to add. It works fine except for the update strongly suggested by Firefox. It gets stuck on Connecting to the Update Server and stays there until I Force Quit it.
This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I know this has been asked a million times but I just don't understand?
I have photoshop elements 7 and Nikon D300. When I take pictures with my camera the color is fine in the live view screen. When I download them to Nikon and to "My Pictures" and look at them the color is fine. When I email them the color is fine. As soon as I put them in Photoshop Elements 7 they are a few shades lighter. It is not the monitor because the color is the way it is suppose to be when the photo is in any other program. I don't want to print them off my printer, I just find it hard to edit the photo in any way when it is so much lighter than it is if I just look at it in my picture files. How can i adjust just the way the photos look on element so they will match my email, my picture file and my camera?
Two possibilities that could explain your symptoms:
1. You have your camera set to use the Adobe RGB color space, and you're viewing the photos in the Organizer. There is a known bug where the Organizer incorrectly shows the colors of such photos. You can quickly test whether this is your problem by opening a problem photo in the full Editor -- if the colors look different than in the Organizer, then you're encountering this bug. A workaround is to set your camera to use the sRGB color space.
2. You have a color profile associated with your display in Windows that was probably installed by software provided by your display's manufacturer. PSE uses such profiles to more accurrately display colors. But the built-in profiles provided by manufacturers may not be very accurate. If you're satisfied with the colors of your photos when viewed outside of PSE, then disassocate the profile from the display:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Colors_are_wrong -
My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off 2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.
My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off 2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.
-
I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes. Any help is greatly appreciated
Your iPhone was hacked at a "small phone unlocking shop "
Only the carrier who locked the iPhone from new can unlock it no-one else
Anything else is hacking which forfeits any help from Apple and this forum
I also doubt that Orange will touch it
For an understanding what hacking does see here
http://support.apple.com/kb/HT3743..
Since all the UK carriers ( I assume you are in the UK )
offer unlocking you have trashed a perfectly good iPhone -
My Iphone 4g, won't turn on, I have tried the power button + home button several times and held them for over 3 minutes. It won't even respond to Itunes and I can't restore it because of that. A little water got into it before it completely shut off but it was like little drops.. Please HELPP.
I also have tried to put it in rice and left it there for 9 hours and it still doesn't workA drop or two of water may have been enough to cook it. If it was bad enough to prompt you to put it in a bag of rice, then I'd venture to guess it was more than a drop or two.
Try putting it back in the bag of rice and leave it there for several days.
If that doesn't fix it, then you're more than likely looking at paying for an out of warranty replacement.
Water and delicate electronics don't generally get along well. -
I recently downloaded ios 6.1.3 in my iphone 3, but unable to install the download. This message keeps showing "unable to install update, an error occurred installing the ios 6.1.3 I have tried several times but the same message keeps coming. What is the solution?
There is no such thing as an iPhone 's3'. There is a 3G which can only be updated to iOS 4.2.1 and a 3GS which can be updated to iOS 6.1.3.
Which model iPhone is this?
Identifying iPhone models -
Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens
Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini
Maybe you are looking for
-
i have installed i tunes on my pc and sync with my 30gb i pod after some time i have formatted my pc and i installed i tunes and when i connected i pod i tunes is showing that i have to erase my old library is it is must that everytime when i format
-
Runtime error while executing transaction BDLS
Hello, While executing BDLS transaction for converting logical system names I am getting following error Runtime Errors CONVT_NO_NUMBER Except. CX_SY_CONVERSION_NO_NUMBER Short text Unable to interpret "7,160 " as a number
-
After Update on Iphone 4, I lost all my Contacts but finally they finally re-populated last night after much 'fiddling' in the dark cloud, but now my phone crashed and is stuck in permanent shut-down or reboot. It became very sluggish, and the starte
-
Long start-up time for Photo Editor in Adobe Elements 11
I am wondering why it takes so long for the Photo Editor, at the welcome screen (the introduction), takes very long; in comparison to Organizer? In fact, when I check Task Manager it has not yet responded. It takes close to 1 minute for the Photo Edi
-
Broken Links on Oracle 2 Day DBA Course
http://www.oracle.com/technology/obe/2day_dba/index.html All lessons show: Sorry, this page was not found (Error Document 404)