Tried to reformat Time Capsule with Disk Utility and now no Drive

So, not reading manuals finally bit me in the behind. I was too impatient waiting for all my back up files to erase so I could free up space, so I got the great idea.......I'll just reformat the disk with Mac Disk Utility, NOT the Airport Utility. Now my Airport says drive needs repair, however, there is no option in the airport utility for disks anymore.
Is there anything I can do to get the hard drive back? or am I stuck with a very expensive wifi device now?
Please help if you can.

Which model TC do you have??
What OS are you running? You might find running the older 5.6 utility gives you a bit more control but that is not possible if you have Mavericks.. it can be still installed on lion and Mountain Lion.
Do a factory reset of the TC if you haven't already tried.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

Similar Messages

I deleted my Boot Camp partition with Disk Utility and now I cannot reclaim the freespace?

I deleted my Boot Camp partition with Disk Utility and now I cannot reclaim the freespace?
And when I try to add a partition to the free space, and try to apply I do this:
I press apply and it does its thing for like a second, I switch tabs and I get this:
No matter how many times I reboot it doesn't work. Please help

diskutil list:
diskutil mergePartitions:

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

How can I delete everything from my Time Capsule? Disk Utility only gives me the choices of First Aid and Restore.

How can I delete everything from my Time Capsule? Disk Utility only gives me the choices of First Aid and Restore.

How can I delete everything from my Time Capsule?
Disk Utility would be used for an internal hard drive on your Mac, or for a drive that was attached directly using USB or FireWire.
The Time Capsule is a network drive. Disk Utility cannot be used for this type of drive.
Open Macintosh HD > Applications > Utiltiies > AirPort Utility
Click Manual Setup
Click the Disks icon
Click the Disks tab below the icon
Click Erase
The "Quick Erase" option will only take a minute or so. This would be fine if you plan to keep the Time Capsule yourself.
If you plan to sell the Time Capsule, you would want to use a more secure erase, like "Zero Out", which will likely take 4-6 hours or so since everything on the drive will be replaced with zeros.

I used the "erase free space " option in disk utility and now my imac says the disk is full and wont let me download songs. please help!

i used the "erase free space " option in disk utility and now my imac says the disk is full and wont let me download songs. please help!

You could try repairing permissions with disk utility, I don't think you will have the option to repair the drive but you could verify it.
This may help you delete the files that DU made but did not remove when erasing the free space.
http://macosx.com/forums/mac-os-x-system-mac-software/317204-no-disk-space-after -failed-disk-utility-erase-free-space.html
When you get your SL disk it will not have the iLife applications, that would have been on the second install disk that should have been with the computer. I forget which version of iLife you will need for SL but I think it is this http://www.amazon.co.uk/Apple-iLife-Single-User-Mac/dp/B003XKRZES/ref=sr_1_1?ie= UTF8&qid=1409607702&sr=8-1&keywords=apple+ilife+11
A search of the forums will confirm or deny this.
As to whether a clean install will cure your problem, i.e. partition the HDD and install I would expect it to be yes, but there are no guarantees it is an old machine.

Cant restore my macbook with Disk utility and my .dmg image

My macbook would not boot anymore. Stuck on gray screen with apple logo, spinning wheel and a loading bar for a while after shutting off.
I was able to get to Disk Utility in the recovery mode and, after a while, was able to make an image of my filesin an attempt to back them up.
The .dmg was put on an external and i checked it on my imac, i could open the .dmg file and browse all my files from my macbook, so those are safe!
After that i tried to wipe the SSD of my macbook and put the image back but that didn't work, also some resource is busy errors.
After trying this a few times without succes i figured i'd try to do a clean install. This worked.
My macbook air is working again but if Iuse Disk Utility in the recovery now and try and restore my image (.dmg file) it gives me Restore Failure; An error (-16) occured (resource busy) as well. I also tried to copy the dmg onto my macbook and run disc utility when booted into OSX. I open up the back up .dmg with Disk utility, then i go to my macbooks partition (Macontiosh HD) and use that as a destination and drag the mounted image as the source as shown on the image below. Am I doing something wrong here?
Doing this i get an error as well: (-119,930,878) Resource busy as you can see.
What can i do to get my image back on my macbook? Any 3rd party software?
I considered just transferring the files after opening the .dmg file but this works only for documents and not for programs and settings of the default apps.
I've looked all over the Internet and it seems more people have had this error but then with making the image, they also suggest unmounting the destination disk before trying to restore but my destination is Macintosh HD, i cant really unmount that can i?
Thanks in advance!

To make a clone, in the future you need to use a program like superduper or carbon copy cloner.
Either program makes an identical clone while preserving certain system files and marking/indicating to OS X that the clone is bootable.
Using Disk Utility to make a DMG was a good idea, but this will not yield a bootable image.
If Disk Utility could do a 1:1 copy of everything, then people would be using it to rip/duplicate DVDs.
But Disk Utility does not (it leaves out certain invisible/system files), hence it cannot duplicate/clone a hard drive or DVD.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

How do I set up my time capsule with my PC and BT home hub

Hi, I really need help.
I have a new time machine I am having trouble setting up. I have a BT Home Hub that I have hard wired to the TC to the WAN port. I have Connected my PC to the Ethernet port. The PC will not find the TC.
I also need to Wi-Fi attach other laptop PCs to it.
PLEASE CAN SOMEONE HELP?
Ade.

You might have an IP collision ..
unplug the wan connection to the home hub..
Restart the Time Capsule with a single ethernet connection to a pc plugged into its LAN port.
Make sure the pc is getting an ip address. Open airport utility and see if you can now access the TC.. !
When you say PC do you mean windows machine?
Windows can have some issues accessing the TC.. especially if you have the windows computer on win7 running homegroup.. which is a wretched piece of incestous connection between win7 exclusively.

Problem with Disk Utility and with ITunes and with Classic

Greetings. I have had problems with ITunes recently; when I try to open it, it gives me the error message: "The ITunes Music Library file is locked, on a locked disk, or you do not have write permission for this file."
When I looked at the ITunes discussion section, people had two ideas for other people who had the same problem:
(1) Make sure that the library of music files is write-enabled (which it is) and not locked (it isn't) and
(2) Go to Disk Utility and repair the disk.
Since (1) is not a problem, I am trying (2). However, when I open Disk Utility, it just stays on the window, stating "Gathering disk information..." and proceeds no further.
Perhaps related to these problems, when I try to start up Classic, the window opens, but it gets stuck at the very beginning (stating "Classic starting up using System Folder ...") and proceeds no further.
Can anyone help me with these multiple problems? Thanks in advance.

amandel
The problems you report are different than those relating to the iTunes receipts/DU conflict. Trashing those receipts as suggested is necessary to get DU to repair permissions, but, as I understand it, you couldn't get DU to recognise your drives. And I've seen no posts relating to iTunes 6 and Classic.
I've had the problem you describe before (at least vis-a-vis DU). In principle DU's "Repair Disk" function would fix it, but of course if the disk's don't mount in DU then you can't fix them:)
Therefore fsck is a good solution, or trying DU from the Installer Disk (don't start to install, just let the first installer window appear, go to the menu and choose "Open Disk Utility") and repairing. Then reboot and repair permissions, preferably with DU running from your hard drive.
Maybe you're more of a "don't touch what's still running" kind of person, but it sounds to me like the systems a bit wobbly and needs some tender loving care. You could try a clean up using a program like OnyX as well - it won't do any harm.
Robert
G4 PB Mac OS X (10.3.9)

Reformatting external HD with Disk Utility doesn't seem to work?

I've got two external hard disks - one Samsung 250GB and one 40GB which were previously formatted for and used with a PC.
I'm trying to erase them and reformat them for Mac, using the 'erase disk' option in Disk Utility, but each time I try, for each disk, it seems stuck at 'creating partition map'. After an hour or so, I give up. I'm reformatting as 'Mac OS Extended (journaled)', which I understand to be the correct option.
Can anyone help - is there something obvious I'm missing?
Thanks!

Instead of using the Erase tab, select the DRIVE (not the volume indent below) and go to the Partition tab.
In the Partition tab, select a Volume Scheme (change it from Current), even if you select +1 Partition+. Click on the Options button below the diagram. Select the appropriate Partition Map Scheme in the dialog box. For exclusive use with an Intel Mac, +GUID Partition Table+ is optimum. Click OK. Name the one or more partitions. The format should be Mac OS Extended (Journaled). Click Apply.
Hopefully by repartitioning, the erase procedure will work.

I erased my iPod nano with disk utility and tried to restore but I get a 1430 error and it never restores.

Ok so I tried to connect my iPod nano to my computer, but when I opened iTunes, the iPod automatically ejected. I thought that restoring it would fix that, but since I couldn't restore it in iTunes because it kept ejecting itself, I decided to erase it using disk utility. I read on here that it's possible to do that. So then my iPod said to restore in iTunes after I erased it, so I did, but it failed with an 1430 error. How do I fix it? Is my iPod destroyed for good?

Take a look at this support document regarding that error. iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439 - Apple Support

Verifying Time Machine with Disk Utility

Is it normal for it to take a while (13 minutes) to verify a Time Machine drive using disk utility? My computer specs are listed below fyi.

It depends on how much data (more how many files that total size) is on the disk.
It will also vary depending on whether it's a USB, FireWire 400, or FireWire 800 connection.
In general, 13 minutes isn't terribly long -- TM backups have a rather unusual and complex structure, involving "hard links" at both the file and directory (folder) level, so there's a lot to do.
And don't bother running +*Verify Disk.+* Just run +*Repair Disk.+* The amount of time required is the same.
+*Verify Disk+* is really only useful to check your internal HD while you're running from it, since you can't repair the disk you're running from.

Known problem with Disk Utility formatting Windows NT drive ?

I have had a strange problem while formatting a newly purchased Iomega USB (Seagate) with version 11.1 (252.4) of Disk Utility (OS 10.5.8). The drive was NTSF and I wanted Mac OS extended. The first attempt failed, unfortunately I didn't note the exact message. I tried again and this time D.U. was stuck on on a wait progress bar with message "not a multiple of 4". Disk Warrior reported disk too severly damaged. Only Drive Genius could properly format the drive. Anyone knows what happened?

I'm not sure what caused the problem you observed, but did you first change the partition scheme to a Mac-friendly one before you tried to do the reformat?
Thanks.
Well, no I didn't and I simply applied "erase to Mac OS extended". Maybe there is a change from earlier versions of D.U. So far and as far as I am aware, D.U. would erase a DOS disk and by default choose the Apple partition scheme. But this default setting could have been changed to GUID with the Intel Macs, or even to DOS if the drive is DOS. This option is hidden in further options in the partition settings along with the DOS partition scheme and unless you decide to partition the drive and not just erase it, it is not visible. As a matter of facts, Drive Genius offers the choice between Mac OS and GUID as you erase the disk.
So this could be the culprit, if for instance D.U. erased to Mac OS extended but kept the DOS partition scheme. It seems unlikely though that the developers didn't take that error possibility into account to include a warning of some sort... but that's what I wanted to make sure.

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Trying to access Time Capsule on Windows8 pc as a hard drive?

Hi everybody,
I bought a time capsule to go with my pc and my MBPR. So I hard wired the pc to the time capsule, and it allows me to use time machine on my macbook pro through wireless, but I cannot access the TC from my windows 8 pc? I have tried a few fixes, but most of them were for older windows versions. Anybody got any ideas on how to fix this? Thanx!

You can still load the airport utility for win7 onto the win8 install. It is about time Apple released the new version but for now just use the earlier one.. it can be ratty, and take a few goes.. don't give up. It does install and I have it running on a win8 computer.
Remember this is windows so keep the naming of the TC nice and simple.. all names, short, no spaces and pure alphanumeric.
In windows explorer type the network drive location, into the address bar.
\\TCname or \\TCIPaddress where you replace with the actual name (now correctly SMB compliant) or IP address.
No luck, turn off the firewall and ensure the PC is in the local Lan set as home.. not work or public.
Still no luck bring up a command window and ping the TC by name and by IP.
If it doesn't respond tell me.. i presume you are getting internet through it though??
In the windows version of the airport utility you can set a windows workgroup and turn on the guest account. How signifcant that is for the latest Gen5 TC I do not know. They help on the older ones.

Tried to reformat Time Capsule with Disk Utility and now no Drive

Similar Messages

Maybe you are looking for