Tried to reinstall OSX 10.3.4, CD ejects, flashing question mark... Help!
So...
Inserted Software Install and Restore Disk 1, restarted holding C. After starting up, the only option given was to erase everything and reinstall. Did that, seemed to be working, but then stalled at 4%-- overnight. So restarted, but now every time I try to boot from the disk, it ejects the disk after several seconds and the flashing question mark comes up. What should I do?
Welcome To Discussions katroshka!
With the install disc inserted, when you restarted while pressing the Option key, to access Startup Manager, did you first click on the install disc, to select it, and then click on the ➡ (Arrow) Tab, that appears on the screen?
ali b
Similar Messages
-
tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message
Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev -
Tried running disk repair from HD recovery, not repairable. Trying to reinstall OSx Lion, says disc is locked. Do I have to erase the drive and lose everything? I also have Bootcamp installed, will boot to Windows no problem.
Hotrodmkviii,
try rebooting in Recovery mode, but when you reach the Mac OS X Utilities menu, run Terminal (from Utilities in the menu bar) instead. Inside the Terminal window, give it the following command, and then press the Return key:
diskutil list
Please include in your reply the output from that command. -
I tried restoring my iMac 27" slim. I followed the steps erased my data then to reinstall osx mavericks. Now that I'm trying to reinstall osx mavericks for whatever reason it doesn't completes. Can you help me out?
That's not quite the proper way as far as I can tell. Usually, one boots directly into the Recovery HD using COMMAND and R keys at startup. If you cannot do that then most likely there is a problem with the hard drive. Since this is a new computer i would make a Genius Appointment and take it in for service.
-
i did erase app store by mistake and i can't undo it and I'm trying to reinstall osx but can't find a link
10.3 does not have the App Store available. Go to Apple menu -> About This Mac and the following will bring it back depending on what you have:
Any version of 10.6, use the 10.6.8 Combo Update:
Combo v1.1 (7/25/2011)
Any version of 10.7, use the 10.7.5 Combo Update: 10.7.5 Combo
Any version of 10.8, use the 10.8.5 Combo Update: 10.8.5 Combo
Any version of 10.9, use the 10.9.2 Combo Update: 10.9.2 Combo
Note, if you it does not bring it back, you may need to run the combo keys of command-R on boot restore if you have 10.7 or later, and then the appropriate Combo update. If you have 10.6.8 or earlier, command-R restore is not available, and you need to either use the original 10.6 installer disc, if the Mac is newer than March 15, 2010, or the 10.6.3 retail disc found here for 10.6 compatible Macs that are older (that includes any Intel CPU Mac with at least 1 GB of RAM):
10.6 retail is available from the Apple Store on http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard (the /us/ in the link may be changed for the standard two letter country code matching the store link).
If you are using a PowerPC Mac, G3, G4, or G5 you can't install 10.6, or the App Store.
Those using 10.6.8 or earlier, do not jump to 10.7 or later, without reading this tip first:
https://discussions.apple.com/docs/DOC-6271 -
No mouse when trying to reinstall osx on mac mini
Trying to reinstall osx trough the network on my mac mini but the mouse didn´t work.
I tried wireless and wired usb mouse. I can move the mouse but the klick funkction didn´t work.
Somebody any ide?I ran into this problem before and restting NVRAM and SMC solved the issue. Might have just been luck for me, but its worth a shot.
Reset SMC control+shift+option and power while MacBook Pro is off and plugged into power adapter
http://support.apple.com/kb/ht3964
Reset NVRAM boot while holding command+option+p+r until you hear second chime.
http://support.apple.com/kb/ht1379 -
hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty
If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689 -
I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
I recently did a manual reboot after my MacBook Pro had frozen, and instead of the usual Apple and loading icon, it gave me the flashing question mark on a folder, which I've never encountered before. I looked up some possible reasons on my PC, and after reading that there's a problem with my HD I tried looking up how to back up my files so that I can do a clean reinstall of Yosemite (latest ver.). However, I've never used anything like Time Machine or anything else that could back up all my files, so it didn't sound like I could do anything about that at this point. I've also tried going into Disk Utility and attempting to repair the disk image. There was only 2 available, disk0 and the base system. I verified the base system, and told me there was nothing wrong (it didn't give me the option to repair anything either, on both available options). I don't think this is the right thing though, since my drive was called MacBook Pro HD. So basically this is the point I'm at now. Is there anything I can do that will repair my HD without erasing all my files?
I've tried all the suggestions and nothing has worked.
I verified the base system, and told me there was nothing wrong
Hold the option key on boot to see if you can select your Macintosh HD.
A flashing question mark or globe appears when you start your Mac - Apple Support
You can boot into Recovery and re-install the OS X on top of what you have. It will preserve your user data.
command R on boot.
Recovery http://support.apple.com/kb/HT4718 -
Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Flashing Question Mark Folder Everything I Am Trying is Not Working!
A few days ago my iMac gave me the "pinwheel of death" so I cold shutdown and rebooted. I heard the chime and then I got this flashing folder with a question mark on it. I quickly jumped on my Macbook pro and researched what it meant. I tried booting while holding the option key and would get a blank white screen with a mouse pointer and nothing else. I tried resetting my PRAM and still nothing! Then I saw someone say to restart my iMac while holding down R to start into disk utility. It worked! I went through the repair disk process and it said there was nothing to repair. I then repaired disk permissions, and bingo it had to repair a few different things that needed to be repaired. Once the repair process finished I rebooted to my main drive and everything worked fine. That night I shutdown my computer and the next morning I got the flashing folder again. This time however, after shutting down and rebooting everything worked fine. Now today my iMac froze and I cold shutdown and rebooted. I got the flashing folder and question mark again. This time nothing is responding. I tried rebooting while holding the option key, tried booting into disk utility and still nothing. The only thing that the iMac will recognize is when I reboot while holding the 'option' key and put in the Mac OS X Lion install disc It lets me click that disc and it starts the install cycle... I really don't want to do this as it would wipe everything on the drive and I do not have a lot of documents backed up. What do I do? Am I screwed? Help would be greatly appreciated!
Thanks much!I think the HD has crashed. Run Apple Hardware Test in Extended Mode at least 3x back to back. If it reports errors, next step is your local Apple Store or AASP. Also carefully read and apply Apple's advice in Flashing question mark appears when you start your Mac. If you had been backing up it would have been a simple matter of replacing the HD, restoring from the backup and you're back up and running. Considering you said you don't back up you're about to learn a very painful lesson on why backing up isn't something you should do it's something you MUST do.
Good luck and sorry for the bad news. -
Following an automatic update, the machine wouldn't boot. Screen came on (shows white) - then either showed a 'No-Entry' Sign and a spinning cog, or a folder with a qusetion mark. I tried to start the machine in different modes ( eg. holding shift after the tone ) but nothing worked. after leaving the machine alone for 1 hour. It worked perfectly again. I did a 'verify disk' check which found no problems. 2 hours later it then froze ( In - Photoshop). Could not force quit, so shut down, and have not been able to boot again since (white lit screen - flashing folder with question mark) . I have also taken the hard drive out and checked the connections which seem fine. Any suggestions? - Is the Hard Drive dead. : other info : It was also running parallels 8, with Windows 7. at the time of the update....
This article may help: A flashing question mark appears when you start your Mac.
-
I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears. Nothing beyond that point....help?
There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Mac not connecting to a wifi network when trying to reinstall OSX using Internet recovery
Hi guys. I'm using a Macbook Air(late 2010 model) and seem to have some trouble reinstallling OSX 10.8.5 using Internet recovery. When I'm trying to reinstall the OS running the recovery mode, the wifi is not connecting. After some trials I noticed that when I run the recovery mode, the network settings are automatically going back to defualt ( I use manual IP address and everything but in recovery mode it falls back to 'Using DHCP'). Just let me know if I'm supposed to provide any other information. I request everyone to help me with this. Thanks in advance.
I reccomend to set ur router back to dchp and after you are done with recovery set it back to manual ip. Or if you have the DMG of the ur installation, create a bootable installation disk. Several tutorials on youtube based on your OSX version and reformat that way.
-
Only the recovery disk shows up when trying to reinstall OSX.
I was trying to erase and install OSX because my computer was starting to get really slow. It actually froze on start up, disk utility was the only way I could get it to work. I erased everything off my "Mac HD" disk i believe that is what it was called, whatever the default was. When I reinstalled OSX it finished everything but froze as soon as it started to boot up the desktop. From there I had to go back into disk utility and check everything. It appears there is nothing on my, used to Mac HD drive, which is now renamed. Where it shows "Available space" it only shows a "-". When i try to verify and repair this disk it says that journal need be replayed, but volume is read only, or something like that. I tried resetting the PRAM already and it does nothing. I have successfully reinstalled OSX a few weeks/months ago due to similar slow computer performance, but this problem came up this time. What did I do to mess this up so badly?
caroliver,
you didn’t necessarily do anything to mess it up; hard disks are mechanical devices, and they won’t last forever.
Are you still able to boot into Recovery mode? If so, do so, then select Utilities from the menu bar, and run Terminal there. Give the following commands in the Terminal window:
diskutil list
diskutil cs list
mount
Please include in your reply the full output from these commands.
Maybe you are looking for
-
Adobe abandons Mac users with PS Elements 4?
Adobe announced a new version of Photoshop Elements (4.0), but it won't be available for Mac users. What other programs do people here use with iPhoto to edit their photos?
-
Mobile Me Sign In Window Doesn't Appear
I have no trouble publishing my iWeb website to Mobile me from my own computer. but when traveling, and trying to publish to Mobile me from a friend's computer, I get as far as the pop up window that tells me to sign in at Mobile Me, but when I click
-
Hi, We are doing EDI Inbound for PO. For this I need to define the port(Sender Port) as in the control record(i.e as they r sending) .If they change their port it is not working what shold I do for this. regds, Vinsa.R
-
How do i fix sound font fail for audigy 2
all of the suddon my sound stopped working and my diagnostics say sound font fail. how do i fix this problem?
-
AQ message notification dispatch order
Hi, My apologies if the answers to these questions are in the docs, but I cannot find them! I need to understand the order in which asynchronous notifications will arrive at a client, as it will be a large overhead to check whether a new message has