Tried to restore and phone has frozen on white apple screen
i plugged my partners phone in to update, it said that there was an error and i should restore it, i did that and it said there was an error nd ejected the phone i plugged it back in twice and then it just froze on the black screen with the white apple on it, i can't switch off or anything. Please help, he's not a happy bunny
I would try and get the phone into DFU mode and restore.
How to DFU Mode
Similar Messages
-
I Have just tried to update my iPhone 5s to iOS 8.1.2 but my phone has frozen on the update screen what can I do to solve this problem
Hi Michaelcampbell1980,
I understand that you have run into an issue while updating your iPhone. Here is an article that will help you address this issue:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I am using a 3GS iphone. While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change.I am using a 3GS iphone.While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change?
If you are having the same issue on several computers then it is a hardware issue! Not a software issue! Replacement is the only resolution!
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne -
I'm trying to set up my iphone 5s and it has been on the apple screen for hours with no improvement
I'm trying to set up my iphone 5s and it has been on the apple screen for hours with no improvement
I don't know how to restart it...I've tried everything and it won't move away from this screen. It's been plugged into my computer for a while now, and still does nothing.You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808
-
so yesterday i dropped my iphone and the home key stopped working. i had to turn the phone completely off to change screens and get back to the home page. today i turned it off to get back to the home screen and now it is frozen on the apple screen. its been like this for about an hour or so. i plugged it into the computer and it still hasnt done anything. i try to reset it but of course since the home button isnt working it wont allow me to do so.
does anyone know what to do besides taking it to apple?You can try the steps recommended in the User Guide. If they don't work bring your phone into Apple for evaluation.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
Why is my 4G frozen on white apple screen?
My iphone 4 has been frozen on a white apple for about a day! i have tried hold down the home button and the top power button but it keeps going back on to the apple. what do i do?
Go here to try theses steps to get it back working. If it doesn't work then you may have to take it to an apple store for repair or replacement.
http://www.apple.com/support/iphone/assistant/phone/
ps It is iPhone 4 not 4G -
My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!
Without know exactly what you did or what happened:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Hi
My iphone became dead apple not verifying its serial no not the imei so should I throug in dustbinIf it was officially unlocked by the carrier it was originally locked to, then it should have been fine.
If it was hacked in any way to make it function as if it were unlocked, then upon restore the iOS firmware failed to re-install correctly and it is now a brick - so in that case, yup, might as well toss it in the trash. -
I have downloaded iOS8 onto my iPhone 4S - the phone has frozen on the Apple screen (and it keeps going black). It is also no longer recognised as a device on my MAC...please help
Make sure airplane mode is off and wifi is on. If no go try restoring in itunes and if that fails you will most likely need to call apple or go to an apple store to get a repair
-
I have a iphone4, i was updating itunes, now the phone has frozen, with an apple on the screen. It wont off and i cant use it. What do i do...?
Try connecting the device to your iTunes library in recovery mode and restoring it. Use the instructions in this Apple support document to place the iPod into recovery mode.
iOS: Unable to update or restore
B-rock -
I was updating my 3GS on iTunes and my phone has frozen, showing the apple symbol only, what can I do about this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
My iPhone 5s is stuck in recovery mode and won't turn on, I've tried to restore and update it to iTunes and its finding my phone, but saying an error has occurred and won't work, the software is up to date, it just automatically switched itself off and when I try to turn it on, it shows the White background with the apple logo asif it's going to turn itself on but then switches off after a couple of seconds, what can I do? ive already taken it to a shop and he's looked at it, but said he can't fix it, thanks.
Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
i was trying to restore my phone and it was connected and everything and i went to restore it and after a couple of minutes something popped up saying it couldt restore. i looked to my phone screen and it looked as if the phone was going to restore but the screen never changed and after an hour, it still hasn't changed. i tired holding down the lock button but that didnt do anything. then i tried hooking it back up to itunes but itunes doesn't connect to it and my computer doesn't detect a connected device. What happened and how can i fix it?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
i tryed to restore my phone but it turn off during the process and an error happens so should i do ?
Hello there, VladlsSwag.
The following Knowledge Base article provides some steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
Itunes 10.6.3 installer " unexpectedly quit on PPC OSX 10.5.8 "
Hello I'm in a mess.I upgraded my Ipod Touch 4g to IOS 6 and now have to upgrade Itunes to Ver 10.6.3. The problem is that when I try to install it the installer quits a couple of seconds after clicking the install PKG. I've repaired permissions an
-
I tried updating from 3.6.12 to 3.6.13 on my IMac and get a pop up window that says Unable to update because I do not have system permissions required to update. If I download the latest version and try to replace the existing version it says "The op
-
Aperture 1.5+ media coverage/reviews
Has anyone else been struck by the lack of media coverage/reviews of Aperture after the 1.5 release? Seems to me that a lot of criticism raised by reviewers concerning Aperture 1.0 and 1.1 were dealt with in 1.5 and subsequent releases (ability to re
-
Hi colleagues, is it possible to merge two or more columns in ALV Table (like ColSpan in the Matrix-Layout) to write a text over more than one column? I haven't found any solution for it until now. Best regards Stefan
-
Adding a new column in a CREATE -- AS SELECT statement
I am creating a table using a select from an existing table. I wish to also add one new column (with null values for all records). Is this possible? What would the syntax be for this column? Thanks, Kevin