Tried to restore iphone 4s, comes up with error 3014
Tried restoring my 4s as it will not load new music or movies since updating to iOS 8.1 and iTunes to 12.0.1.
It comes up with the error 3014, any ideas?
Click here for information.
(115295)
Similar Messages
-
HT201210 trying to restore iphone 4 comes up with error -1 what to do
restoring an iphone 4 in iTunes comes up with error -1 what to do
Hi there Roger,
If you have as yet been unable to restore your phone, I would use the troubleshooting in the following article about that very subject, named:
Resolve iOS update and restore errors in iTunes
If the issue persists, you should use this section of the following article that mentions that exact error number, named:
Get help with iOS update and restore errors
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this error code appear for them before and how were they able to fix it?
Thank YouSee SIMPLE easy solution for 1015 3094 3014 21 error
-
Can't restore iPhone 4 from IOS7.02 error 3014
Hello all,
Familiar topic for many.... Can't restore iPhone 4 after trying to update to IOS7.02 and keep getting error 3014 whenever it tries to restore firmware halfway through update process.
Have read all of the discussions and done the following:-
- tried it on another (proven) network
- Tried it on another identity on my machine
- deleted and reinstalled software update file several times over
- tried different USB cables
- checked that there are no ports blocked.
- looked at the host file and there is no reference to gs.apple.com on there
- Phone is not jailbroken
- turned off security software.
Any more suggestions?
Grateful and expectant,
ZNZB*
P.S. Nearest Apple Store is about 3000 miles away, before anyone asks.Itunes is updating ALSO today
Endless countless millions of people are trying to authenticate AFTER downloading the new IOS.
Download servers and Authentication / Activation servers are slammed right now.
Give it some time.
download servers VS. authentication servers
If you've downloaded but can yet activate, you can wait till later and Activate your Iphone (or Ipad also) without any worries
Iphones , Ipads, and Itunes are ALL being updated today, so server traffic is enormous. -
Tittle says all! I need help! The iPhone 5 will not do anything when pluged in. Please help!
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
can someone help?????
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
How to solve iTunes error 3194 in 10 simple steps -
My iphone is stuck on the apple boot logo screen. What do i do and i already tried to restore but it comes with an error
Try this
http://support.apple.com/kb/TS3125 -
I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.
Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that. Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.
-
my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1
Here's what that error means:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This comes from this article:
http://support.apple.com/kb/TS3694#error1 -
Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!
You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
I am unable to restore my iPhone4, I have iOS6 and latest iTunes installed and when trying to sync or back up it comes up with Error −54. How or what do I do to fix this?
== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad. -
once again my iphone not working. i have a usb sign pointing to an itune icon on the screen. this is been on for over 24 hours. tried to restore but keeps coming up with era can anyone help please
What is the error that is occurring? We are not mind readers.
-
My Iphone 4 comes up with "Cannot restore due to Error 21". My security settings are all ok as when I connect another Iphone to my PC, it updates & works fine. Does anyone know what Error 21 means please?
When you searched Google for "iPhone Error 21" what did you find?
-
trying to update ipad2 its now asking to restore i click the restone bottom but its comes up with error 4013 help
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020. -
Error whilst trying to restore iphone 5
iphone error 21 whilst trying to restore iphone a number of times.
HELPHello, _sara.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through for error 21.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm yoursecurity software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Jason H.
Maybe you are looking for
-
Approved and published items are not shown in the catalog search
Hello all, We are implementing SRM 4.0 SSP scenario . To support shopping of EBP we are also implementing CCM 2.0 as an add on. Please note CCM and EBP are on same client and CAT & CSE are also on the same client. No XI is involved. The catalog schem
-
Why can i only apply italics to an entire paragraph?
I make frequent use of Times New Roman for publishing work I do and in my private correspondence. Pages will not allow me to use italics for selections of text within a paragraph when I use paragraph styles imported from Word. I can change the entire
-
In Finder how do I get iTunes to show bit rate and sample rate of an entry?
In Finder how do I get iTunes to show bit rate and sample rate of an entry so I can set my DAC?
-
Captivate 5.5 project. When I select any image in this project to add an effect, the effect window will display but it is entirely blank. No functionality on the screen at all. Tried to start a new project, same thing no effects? Existing project,
-
Upgrading SRM 5.0 to SRM 7.0
Hello, We are starting upgrading soon. We go from SRM 5.0 EHP1 SP18 to SRM 7.0 EHP1 SP 5. We still use the Requisite catalogue. I was wondering if you have some tips for me. What can we expect. Which documentation is the most helpfull etc. Thanks!