Tried to restore ipod got and error and now nothing
I tried to restore my daughter's new to us but old iPod touch and received an error message. Now it is completely unresponsive. Help!!!
And what did the error mesage say????????
Similar Messages
-
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
Tried to restore iPod nano and keep getting connect to iTunes
Have not used my nano in some time. connected it to computer and at first it was recognized, but when I went to restore to factory settings i got an error message and now a message on the iPods screen says to connect to iTunes to restore. My computer is no longer seeing this iPod and i have tried everything to shut it off by holding power button down and it appears frozen. My warranty and support has been expired for some time. Is it trash? or does anyone know what I could do. I don't want to pay the 29.00 incident fee if I don't have to.
Try putting it in Disk Mode
Putting iPod into Disk Mode - Apple Support
If it goes into Disk Mode, run iTunes on the computer and connect iPod. iTunes should prompt you to do a Restore. Hopefully, the iPod will function properly after this Restore. -
I have tried 3 times to restore my itouch to update to ios 5.0 and now I am getting error message. "ipod could not be restored. an unknown error occurred. error 1611" ?!?! does anyone know how to fix this?? I now have no access to my ipod. it is stuck on screen with itunes icon and plug!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
Tried to install 10.4, got an error message, now nothing works!!
So I got an 800Mhz eMac for my mother. It came with 10.2.8, she needed 10.4 to be able to install Skype. I got 10.4 on 16 discs and started installing it, at disc 9, I got an error message. After that it told me to insert OSX INSTALL disc 2. Everytime I put it in, it spits it back out, I tried every other disc, doesn't change anything. Tried restarting by putting in Disc 1 and doing the C button start-up, doesn't change anything. I even tried other restore discs that I have and no result.
Please Help, thank youYou will probably have to erase and install the operating system using the good disk. You may be able to backup if you can use Target Disk Mode to retrieve your critical data of the machine to another Mac.
http://docs.info.apple.com/article.html?artnum=58583
Furthermore you have broken your friend's license agreement by installing those disks on your computer. They are only licensed for use with your friend's computer.
In the future never try to circumvent the law like this, it can land you in deep trouble.
Once you are done backing up, use the startup manager to start the good disk, and go through the procedure to erase and install from the options of installation when you nothing but a keyboard and mouse connected:
http://docs.info.apple.com/article.html?artnum=106178 -
My iPhone 4 has been disabled and it went to the "Connect to iTunes screen."
At first, iTunes told me to unlock the phone before I could use it in iTunes.
Until, I turned the phone off, pressed and held home while plugging the USB cord back into my device and now my phone is at the "Connected to iTunes screen."
However, it is not coming up in my iTunes and I have no idea what to do.
If there is anyway that any of you know how to keep all your data but restore or reboot your phone, I'd love to hear from you.
Regardless, I need to undisable my phone!! HELP! Please and thank you!You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
My iphone 4 did a update this morning. Ever since it has showed itunes with connector. Connected to itunes tried to restore. Came back with error now only shows the apple sign. Please help!
iPhone is in recovery mode.
http://support.apple.com/kb/HT1808 -
HT201210 trying to restore ipod and I get an unknown error
Trying to restore ipod touch and I get an unknown error.
What is the complete wording of the error message?
-
HT201210 iphone 4 has died. tried a restore but getting an error 21 - help please
looked at my phone tonight and noticed that it wasn't responding. Thought the battery was flat so put in on the charger. it then gave me a message suggesting that I needed to connect to itune - so i did.
Tried a 'restore' but got a error 21.
Phone is currently dead
Please help - need phoneiPhone error codes are often not very specific to the cause. But Error 21 can be due to faulty battery in some cases. So battery replacement could help. Here is Apple Guidance: http://support.apple.com/kb/TS3694#error21
-
Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
I tried to restore my iphone and got an error 1002. What does that mean and how can i fix my phone?
Click here > iOS: Resolving update and restore alert messages
Click 1002 on that page. -
i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808 -
Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
-
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
Maybe you are looking for
-
hello - im still having a problem. this array will set but only shows one record from the array. when there are 3 demo data sets. thanks in advance for your help. i want to store the variable id in an array and access that array through session id hy
-
Dear Experts, I have requirement to add a note in user decision step to allow the user to enter comments while approving or rejecting workitem in UWL. I have enabled the note using XML file. I read that this comments will be captured in workflow cont
-
Profit cente wise profit&loss account
Plz tell me profit center wise profit &loss account tell me TC for this Very urgent
-
How can i use the open debts control account
Does any one knows how to use this control account, i tried at the journal entry and it works great but i wonder if there is another document where i can use this account for a cutomer.
-
Getting Authenticate Proxy Server questions when Installing Flash Player?
Hello all I am getting the menu below when trying to install Flash Player. This is an old proxy server that I have not used for 3 years. I cannot find anyplace on my computer where this is still referenced. How do I get around this menu and insta