Tried to restore iPod nano and keep getting connect to iTunes

Have not used my nano in some time. connected it to computer and at first it was recognized, but when I went to restore to factory settings i got an error message and now a message on the iPods screen says to connect to iTunes to restore. My computer is no longer seeing this iPod and i have tried everything to shut it off by holding power button down and it appears frozen.  My warranty and support has been expired for some time. Is it trash? or does anyone know what I could do. I don't want to pay the 29.00 incident fee if I don't have to.

Try putting it in Disk Mode
Putting iPod into Disk Mode - Apple Support
If it goes into Disk Mode, run iTunes on the computer and connect iPod.  iTunes should prompt you to do a Restore.  Hopefully, the iPod will function properly after this Restore.

Similar Messages

  • TS3694 I am trying to restore my iphone and keep getting the error message 3014?

    I am trying to restore my old iphone for my daughter and keep getting error message 3014 - my itunes has the latest version uploaded?

    Have you looked here?

  • Trying to restore ipod touch but keep getting various errors

    so alot of my music kept skipping (the song would start and jump around within itself) so i updated the ipod, then had to update itunes, and now my ipod wont turn on so ive tried restoring it but evertime i do i get errors first it was error 6, then 37 and then i updated my version of microsoft windows tried again and then got error 6 again.
    anyone know what the go is?
    ever apple device ive ever owned has has had problems i dread going to the apple store so hopefully i can fix it without having to do so.
    thanks

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions

    i have tried to restore my iphone but keep getting error 1015 any suggestion

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred" keeps popping up.

    This is a question for a mini iPad...
    I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred.  I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?

    Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
    Regards.

  • HT1473 Trying to download cd's and keep getting 4010 error.  How do I correct this?

    Trying to download cd's and keep getting 4010 error.  How do I correct this?

    if you have itunes match - dry disabling it - then disable your antivirus and try again - good luck!

  • I am trying to empty my trash and keep getting error code -8003

    I am trying to empty my trash and keep getting error code -8003...how do I get it to empty?

    http://support.apple.com/kb/HT1526

  • I am trying to install firefox 4 and keep getting the message that you have to reboot your computer to complete the uninstall i have done this a number of times any suggestions

    i am trying to install firefox 4 and keep getting the message that you have to reboot your computer to complete the uninstall i have done this a number of times any suggestions

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Trying to finalise my movie and keep getting error 108

    Trying to finalize my movie and keep getting a message saying error 108 please help?

    http://support.apple.com/kb/HT1526

  • I am trying to install lightroom 4 and keep getting error 1935.

    I am trying to install lightroom 4 and keep getting error 1935

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=1935

  • I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That's all we know. in English

    I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English

    Bookmark and use this;
    Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
    This add-on is very simple: on installation, it backs up
    and then resets your search preferences and home page
    to their default values, and then uninstalls itself. This
    affects the search bar, URL bar searches, and the home page.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I bought an ipod for my grandaughter and it says ipod disabled  and under that connect to itunes. When i connect to itunes it says cant read because it is locked with security code. Grand-daughter doesn't remember the code she put in.  Can anyone help?

    I bought an ipod for my granddaughter and it says ipod disabled and under that connect to itunes. When i connect to iturnes it says i need a passcode. My granddaughter doesnt remember what pass code she put in. Can anyone help granny please?????????

    we can connect iturnes but we cant buy from it because it ask for security question and i dont know it and none one else

  • I bought a new iPod nano and cannot get the music synced

    I just purchased a new Ipod nano and registered it and upgraded the software. I cannot get the music library to sync.  My music is in the cloud. 
    any advice on what I am missing?

    Hey OBandPL,
    I would use the following article to run through the recommended syncing steps one more time:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I just got an ipod nano and i went to use itunes. I noticed that my boyfriend already had account on my computer. I was able to put in my email and purchase a few songs however it will not sync to my nano. I went to devices and it will not sync.

    I just got an ipod nano and noticed i had Itunes on my computer. My boyfriend had downloaded it for him a while ago on the computer with his own music. I went on the account and downloaded some music but it will not let me sync it to my nano. I believe that must be because it is his account. I went to the control pannel to uninstall the program (with his permission hehe) and re downloaded it. All of his stuff came back up. I am not able to sync anything to my nano thanks for any input!

    Uninstalling and reinstalling iTunes has no affect on the media on the computer or the account it is linked to.
    If the media was purchased under another iTunes account, then it is permanently tied to that account.
    Using mulitple iDevices with one computer

Maybe you are looking for

  • How to create a custom report and include multiple extended CRM database?

    I have created a number of CRM databas extensions and applied all there fields to my contacts and cases. I might have for example: - Additional address details - Business information - Quote Details - Trade Referees I know how to run a custom report

  • Queries taking long time to run

    Hi BW Folks, I am working on virtual cube 0bcs_vc10 for bcs(business consolidation) the base cube is 0bcs_c10. We compressed and partitioned the base cube. The queries which i developed are running fine and are in production. Now  when a new req came

  • Hiding Columns in a Spry Region

    Hello All, I'm using the SpryDOMUtils.js to hide columns in my SPRY table.  Everything works fine when I load the page except when I add the LoadListener to hide the columns when the page generates: function hideColumn(){      Spry.$$("#second th:nth

  • (JTable) How can i get the first columns cell in a selected row?

    Hello. I am trying to figure out how i can get the first columns cell within a selected row no matter what cell is selected in that row. I have a class that extends AbstractTableModel which represents the table. Now i have another class that extends

  • Decode mail

    how can we decode email and please tell me i m new comer what is exam fee of solaris 9 sys admin I ?