Tried to restore my iPod and now it is unresponsive and will not connect with iTunes

I've read other solutions to other questions and none of those have worked, im thinking i may have to send it in to apple.

Try:                                               
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • After trying to down ios 7, iPad will not charge, will not open and will not connect to itunes.  The only display I will get is the apple logo, or low battery warning.

    After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes.  Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.

    Connect with cable to computer.   Your ipad is in recovery mode.
    Follow directions to fix
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

    Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore.  I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

    Hey dbwithers,
    Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • HT201412 phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

    phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

    my phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

    If the device isn't be recognized by itunes, try following the troubleshooting steps in one of these articles
    http://support.apple.com/kb/TS1538 for windows
    http://support.apple.com/kb/TS1591 for mac

  • My iPod 4th-gen charges just fine in any wall outlet, but when connected to my brand new ASUS Windows-8 laptop's USB 3.0 port the charging process just keeps "blinking" on both the iPod and the laptop and will not connect to Itunes...

    Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem!                                                                                                                                                                                                                               My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar.                                                               When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over!                                                                                                                  I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good.                                                             I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work!                                                                                          The iPod, the laptop and iTunes ARE all fully updated!                                                                                                                                                                I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing!                                                       I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol.                                                                                                                                                                                                 I hope somebody knows a fix or solution! Thank You!

    Try on another computer to help determine if iPod or computer problem.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My ipod shuffle is brand new and will not connect to itunes

    my ipod shuffle will not connect to itunes and it is brand new and i have used other ipods on this computer.

    When you take this one back, be sure to have your USB docking cable checked, to make sure it is not  the thing that is defective.
    Also, make sure you have USB cable plug completely inserted into the headphones jack.  The fit is sometimes tighter than expected, especially when the shuffle is new.  This is apparently enough of an" issue" that Apple has a tech support doc about it
    http://support.apple.com/kb/ts3572

  • HT1212 My ipod is disabled and is connected to my computer but will not connect with itunes

    My ipod has been disabled and will not connect to Itunes

    Are you still holding the home button when you plug it in or do you let go?
    You want to make sure that you turn it off, hold the home button and plug it into the computer BUT do not let go of the home button. Keep holding the home button until you get the itunes symbol and the cable on the iPod.

  • HT4623 Hi, I have taken over my daughters iphone 3gs and updated it and restored iphone but now it will not configure with my itunes or the original sim that was in it, saying "the activation server is temporarily unavailable. And will not connect to itun

    Hi I have taken my daughters iphone and wiped it and resetted it but it will now not let me activate it via itunes and will not even go onto the home screen of the phone so i can go to settings etc and i do not know what to do to enable the phone to be activated

    "We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care?"
    99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
    So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

  • My iPhone4 is unable to start, and will not connect to iTunes. Please help!

    I've had my phone for about 3 months now, and I've already had to have it replaced. I got a new one about 3 weeks ago, and until last night it has worked perfectly fine. Last night, it turned off, and will not turn back on. I've reset it countless times, but it goes right to the Apple logo and then freezes for hours. It has been plugged in all night to, so it is fully charged. I tried connecting to iTunes but it will not connect. Someone please help

    Here are Apple Steps: iPhone not recognized in iTunes  http://www.apple.com/support/iphone/assistant/itunes

  • Forgotten password and have not connected with itunes

    I have not synced with iTunes and have forgotten password plz help?!It is an iPod touch 5th generation and not sure what operating system it is haven't updated it since last release

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My iPhone 4S will not connect with my Windows 8 pc, I have tried everything! Can someone helpe me!, My iPhone 4S will not connect with my Windows 8 pc, I have tried everything! Can someone helpe me!

    I don't what happen, but when I got my new computer with the Windows 8 it synched my 4S just fine. Now it keeps saying that the "USB device not recognized." And it won't even connect with itunes.

    Try the suggestions here >  iOS: Device not recognized in iTunes for OS X
    If nothing helped, repair permissions.
    Disconnect the iPhone.
    On your Mac open Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Then select: Repair Disk Permissions
    This process can take a few minutes.
    When it's done, restart your Mac and connect the iPhone.
    If that doesn't help, reset the PRAM >  About NVRAM and PRAM

  • I accidentally reset my Ipod nano 5th generation and now it say's window's Ipod and will not sync in Itunes... How can this be fixed?

    The Ipod shows up in Itunes as "Window's Ipod" but won't let me manually sync through devices or restore.  I can't seem to click on the "window's Ipod box to cjange it back to "my Ipod" either.  I've tried uninstalling and reinstalling Itunes and used different USB ports and still no change.

    What happens when you try to restore the iPod?
    Have you tried resetting the iPod?
    http://www.apple.com/support/ipodnano/4th_5th_generation/
    The above also has other trouble shooting.
    Note you posted in the iPod touch forum.

  • My ipod is disabled and will not connect to itunes, also it wont say its cahrging when its connected to the usb which is in the laptop

    my ipod is broken as well, my mother threw it at me & it busted. at the top, it says "IPOD DISABLED CONNECT TO ITUNES" the thing is, is that it doesnt connect to anything. when i plug it up to charge, the charging symbol doesnt appear, yet the ipod still charges. Im really confused & i NEED to get this thing to work, it holds memmories. ( the safari also doesnt work, as long as the downloading music. )

    All the data on the iPod is now toast.
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Ipad 2 in recovery mode and will not connect to itunes after trying to install ios5.

    tried to update to ios5,finished d/ling and when about to install, syncing-related(don't quite rmb) popup showed up and interrupted the installation,asked to continue or cancel, I cancelled, finished syncing ipad, clicked update again, installing but recieved error 1602, now ipad = recovery mode,BUT wont connect to itunes. help!

    EDIT: this is what happend
    so I tried using a differnet computer, restoring it to the ios4.3.3, then once my ipad is out of recovery mode, i went back to original computer, connection worked, then i tried to update to ios5 again, success.. but when restoring, got stuck at "preparing ipad for restore" for 10 min, then got error 1602, then back to the same problem, ipad is in recovery mode, and wont get detected by computer. HELP

Maybe you are looking for

  • How to hide read mode navigation in acrobat xi permanantly

    How to hide "Read mode navigation" . In my application i am opening pdf file in light box window where i disable right click to protect download and print pdf file( only View ). but This Read mode navigation is appearing automatically when we put cur

  • ITunes 7 Unknown Error question.

    http://docs.info.apple.com/article.html?artnum=304318 I have been using that document to help me solve this problem, but when I try to disable Safemode in Quicktime, after I close the window, the button checks itself, even after I hit apply, so I go

  • 20" studio display & AGP G4

    i bought a 20" flat panel LCD acrylic studio display and can't get it to work with my power mac G4 AGP "sawtooth". i have the display hooked via DVI to ADC adapter like i did with my 17" flat panel LCD acrylic studio display, which worked fine. the 2

  • Package org.apache.axis.message not found in import.

    Hi, I am using axis to give response to another bpel process after any operation is completed of a BPEL process.I am using JDeveloper to deploy my bpel process.It has succesfully deployed process without any error but when bpel server is unpacking it

  • Video zoom in/out

    i am having troulbe zooming in/out in video mode. i have to manually zoom in/out in photo mode, then go back to video mode to stay at those current settings, and shoot the video from there... how can i change my zoom lense in video mode?