Tried to set up shared memory more than once?

Hi all,
Im getting a pop up error on 10.7.3.. It pops up very fast and is almost impossible to read.
Having checked the console, this is the error..
01/04/2012 13:59:12.457 com.apple.launchd.peruser.501: (com.facebook.videochat.'MyName'.updater[486]) Tried to setup shared memory more than once
(Ive edited out my name from the string..)
Can anyone tell me how to fix this?
Thanks!

I think this is a bug in some facebook-related software you have installed.
Maybe update facebook stuff.

Similar Messages

Load rule to update alternate hierarchy with shared members more than once

I have a aso cube with an alternate hierarchy that is not stored because the shared members appear more than once. Below is how my alternate hierarchy looks.
Dept
Class
VolumeLevel
StoreNum
where StoreNum is the shared member.
I build the cube using eis every weekend. The VolumeGroup changes everyday, so I was thinking of using a sql load rule to update the outline everyday. Assuming that the data and the aggregation does not get cleared. Is it possible to do it using sql load rule?
Thanks,

You can check here if you are satisfying the conditions for creating shared members under the Hierarchy (refer to Alternate Hierarchies). Plz note that rules for shared members are different in ASO world.
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?acrtapdb.html
Otherwise there is no reason why you should not be able to create a shared member.
I am able to create a hierarchy using a sample file like this ->
EN_MAIN, EN_500000
EN_500000, EN_49999
EN_ALT, C_500000
C_500000, EN_49999
ENTITY (Multiple Hierarchies Enabled)
|-EN_MAIN (Stored)
|--EN_500000
|---EN_49999
|-EN_ALT (Stored)
|--C_500000
|---EN_49999 (Shared)
The rule file has only "Allow Property Changes" on.
Thanks,
Sunil

I am trying to set up Sharing amongst several computers on my home network. I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up). There is no explanation why.

I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

I'm trying to change my secret question because I forgot to answer. Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

I'm trying to change my secret question because I forgot to answer.
Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

See this thread:
https://discussions.apple.com/message/23280567#23280567

FINDER disappears after trying to set file sharing. What to do??

‘Finder’ dies when I try to use the GET INFO approach and set a folder to be shared. Finder seems to disappear as soon as I place a check mark in the sharing box. It does not even appear in the FORCE QUIT screen. The computer then is in a state of suspended animation, so I shut off the power. This is a repeatable failure mode.
I used Disk Utility to ‘Repair Permissions” a few times and received some arcane messages when this process was complete … warnings that the following SUID files had been modified and will not be repaired;
- System/Library/Filesystems/AppleShare/afpLoad
- usr/bin/setregion
- System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner
- System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper
I don’t know what to make of these messages. This stuff may not even be associated with this problem ...
Anyone have any suggestions about how to proceed ??
DICK

Today I found another way to crash Finder while trying to set file sharing. Yesterday morning I made Finder disappear, putting my computer in suspended animation, by using the following process; Right click on a folder, GET INFO.>GENERAL>SHARED FOLDER. This caused a crash. I posted a query about this but have received no reply.
This afternoon I tried another approach; SYSTEM PREFERENCES>SHARING>FILE SHARING, then I dragged a folder into the Shared Folders window and dropped it. The folder did not appear in the window. Finder disappeared and my computer was frozen, as before.
So now two approaches lead to the same result; crashed Finder and no shared folder. I’m open to any suggestion about how to cure this problem.
DICK

Can adobe software be shared across more than 1 persons computer?

I was wanting to know if I buy the complete package can it be shared with more than 1 persons computer, possibly up to 3 people?

If I read your intentions correctly, the answer would be no. A single user license/subscription allows for working installations on two machines, only one of which can be in use at a given time. It is not intended to be shared by a group.

Calendar: Setting an alert for more than "2 days before"?

I'm sure there is a way to set an alert for more than "2 days before" when creating a new event. Every PDA out there allows infinite options in this regard, yet I can't do this on the iphone?
How can set my iPhone calendar alerts for "7 days before" or something to this effect? Can I change the defaults? What can I do?

You can set the reminder in your computer, instead of on the iphone as the iphone's longest option is two days.
From the manual:
"Alert time—from five minutes to two days before the event "
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

TS1292 How come it doesn't show the amount of money there is s gift card? I tried putting in the code more than once, but all it says is that the card has already benn redeemed?

How come it doesn't show how much money there is left in my iTunes gift card? I have tried putting in the code more than once, but all my tablet says is that the card has already been redeemed.

I haven't got access to the server right now (so I can't provide the complete details), but something like 6-700 GB (which is more than it shows in the client time machine windows, but less than what is true (which was around 1,5 TB))

Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct." Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Weblogic.management.server bound more than once?

Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I start both
up, I get the following message on both managed servers; the admin server, on the other hand, does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
Gene

Prasad diagnosed the problem. Look in clustering under the same title if you're interested!
Gene
"Gene Chuang" <[email protected]> wrote in message news:[email protected]...
Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I startboth
up, I get the following message on both managed servers; the admin server, on the other hand,does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable andyou
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
Gene

Custom Administrative Template Error 53 Key name specified more than once

Hi All,
Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
settings. I am trying to set this up so that it is controlled via GPO.
My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software.
The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
The adm file I have so far is below
TIA
Jason
---------------------------------------------CUT---------------------------------------------
CLASS User
CATEGORY "App Site Settings"
POLICY !!Site1Policy
EXPLAIN !!Site1Explain
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME "SystemDatabase"
VALUEON "D:\\App\\Data\\App.mdw"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME "ConfigPath"
VALUEON "D:\\Site1\\Data"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME "ConfigFile"
VALUEON "D:\\App\\Data\\App_Comms.mdb"
VALUEOFF DELETE
VALUENAME "SysConfig"
VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
VALUEOFF DELETE
END POLICY
POLICY !!Site2Policy
EXPLAIN !!Site2Explain
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME "SystemDatabase"
VALUE "D:\\App\\Data\\App.mdw"
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME "ConfigPath"
VALUE "D:\\Site2\\Data"
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME "ConfigFile"
VALUE "D:\\App\\Data\\App_Comms.mdb"
VALUENAME "SysConfig"
VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
END POLICY
END CATEGORY
[strings]
Site1Policy = "Site1 settings"
Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
Site2Policy = "Site2 settings"
Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
---------------------------------------------CUT---------------------------------------------
CLASS USER
CATEGORY "ApplicationSettings"
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
POLICY !!SITE1Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site1\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
POLICY !!SITE2Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site2\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
END CATEGORY
[Strings]
ArbitrationDefault =D:\SITE\Data
ArbitrationPolicy =Arbitration path
ConfigFileDefault =D:\App\Data\App_Comms.mdb
ConfigFilePolicy =Application configuration file
PolicyExplain =Enter Explainition of the Registry settings here
SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
SysConfigPolicy =Application site system configuration file
SystemDBDefault =D:\App\Data\App.mdw
SystemDBPolicy =Application system database path
SITE1Policy =Site1 Application Settings
SITE2Policy =Site2 Application Settings

Use Topic in TOC more than once...

We have just purchased RoboHelp 6 for our Help System
generation as well as to begin developing online training courses.
I have a WebHelp File that contains 5 books - one book per
procedure. I have a topic that is applicable to two procedures.
Without having to make a copy of the topic, is it possible to set
up the TOC to use the topic in question more than once?
The problem arises when I am setting up the Browse Sequence.
I tried to set up the Browse Sequence using the Auto-create using
TOC...option, but the sequence appears to be in alphabetically
order. In fact, it is in no way, shape or form even close to the
TOC (as indicated in the Help - Topics in each browse sequence will
be in the same order as in the TOC)!!!
So, I tried to manually create the browse sequence. I used a
browse sequence to contain all topics, then I set up another browse
sequence to contain the duplicate topic. When I use the navigation
arrows to move through the toc, it will not advance to the second
browse sequnce.
Any ideas or suggestions would be greatly appreciated. Thanks
in advance.
Lisa

Hi LNT1
The trick to all this is to never directly link from the TOC
to the desired topic. Let's assume the TOC should have a topic
appearing in two different places. In order to make this work, you
link from two different redirect pages.
Now if you generate WebHelp, I see where there could be an
issue, because the browse sequence can only link from one topic to
another. In other words, a topic can only have a single link to and
a single link from it. So in this case, the redirect trick would
fail. However, another trick comes to mind that may work. Instead
of a Redirect page, you could have two different pages that instead
of redirecting, contained an Inline Frame (IFRAME) that simply
displayed the contents of the desired page. Basically, the pages
containing the IFRAME would link properly and provide the desired
effect.
For more on IFRAMEs, download my Tips and Tricks file and
scan it for how to create IFRAMES.
Cheers... Rick

Tried to set up shared memory more than once?

Similar Messages

Maybe you are looking for