Tried to sync ipad2 with itunes and got an error and now ipad frozen with usb cable/arrow/itunes logo.
I'm trying to sync music from my itunes library on my PC to my ipad2. During process got an error(don't remember #) and then it went to backing up. Now the ipad is frozen with a usb cable coming up to a white arrow and then the itunes logo. The ipad will turn on and off but nothing else. Any ideas?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Similar Messages
-
I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help
http://support.apple.com/kb/TS3694#error1
-
I was trying to update my ipod for ios 6. It got downloaded but could not update my ipod. my ipod screen is now showing one message usb -up arrow-itunes, can anyone suggest something please.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Tried to update my iphone 4 and got an error message. Now I can't update my phone or even restore it!!
Hi phaniemae528,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
I need to know how do I use my phone now since I was in the process of updating the iphone via itunes, now it is in the mode of connecting to itunes! I really don't want to restore my phone as I may be losing all my media and other contact information! How do I get out of the stupid mode??
Your apps / music / photos etc are stored in iTunes on your computer.
Just do the Restore then re sync your iTunes media.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Make sure and create a backup following the instructions at that link. -
I am using iphone 3GS, after syncing for few times and got the errors. I deleted the backup from Edit-> Preferences-> Devices. Then I synced again, there was an error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone. What can I do? I have no backup anymore on ituens.
babesharon
I closed iTunes & manually deleted the file which was still stored locally even though it didn't display in Preferences. I have vista so I went to
C:\Users\{user name}\AppData\Roaming\Apple Computer\MobileSync and deleted everything in the Backup folder (though I left the folder as is). If you have a different OS search the apple website for the backup location.
I reopened iTunes & Synced with out a problem. I also got the update to install.
Good luck. -
I was trying to back up my phone and got an error message and cannot use my phone at all... There is a picture of an itunes icon and a cord. I cannot get to my phone or any settings or icons.... HELP. I'm not sure of my operating system or which iphone 4 it is....
Open current iTunes on your computer. Connect iPhone to the computer with USB Cable. Follow directions or click the Restore button of iTunes.
-
When trying to open ITunes, I got an error message of msvcr80.dll can not be found.
Assuming that it was an iTunes file, I reinstalled iTunes.
Trying to open again, I got an error message of an appication is trying to open a library file incorrectly.
How do I resolve this problem.
Neither my PC with Vista nor my my laptop with windows 7 will work?
ThanksHello Msvcr80.dll,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
Wanted to sync up my new IPhone4, and thought that I should make sure I had the most up to date version of ITunes on my desktop first. Tried to get on site, and got an error message saying; "The folder ITunes is on a locked disk or you do not have write permissions for this folder." Cannot get on ITunes at all now. Help! Thx.
In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac
-
When trying to downlead the latest version of iTunes, I got 2 errors:
1. MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem.
Service "Apple Mobile Device" failed to start. Verify your admin ......
2. iTunes was not installed correctly. Error 7 (Windows error 126)
Please help!Do you have Windows XP Pro?
see https://discussions.apple.com/thread/5840089?tstart=0
there is a stupid checkbox you must uncheck, saying "protect my computer and data from unauthorized program activity"
You see this screen when you right-click on the ItunesSetup.exe in your Downloads folder.
downloads>ItunesSetup.exe (right-click)>yourself as admin & UNCHECK THAT BOX!> conntinue with new installation and even find your old playlists still intact!!
This is apparently a Windows XP fix alone. MSVCR80.dll is (probably) reinstalled by Itunes under a partnership aggreement with Microsoft.
Using the Microsoft "Fix It" utility at http://support.microsoft.com/mats/program_install_and_uninstall/en does NOT fix anything. Abandon All Hope Ye Who Run This Utility More Than Once -
I'm trying to sync/back-up apps on my iPhone 3G and iTunes keeps telling me it can't complete the operation because "the apps on my iPhone cannot be determined." What the **** does this mean?!
Same problem. Wish I knew.
When I tried to Restore, I got an Error 13xx and it won't even do that.
not a happy camper if a phone this expensive stops working in 2 years. -
i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use
That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you -
I am trying to download Illustrator to my windows laptop. I tried with CC but got an error when entering the license number. So someone told me that CC is different from CS6 Illustrator, and I have a license only for CS6 Illustrator. What is the correct link for CS6 Illustrator then?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
I am looking to start learning Xcode from the ground up and happy to help myself using published tutorial. At present the current Xcode in the App Store is V6.1.1 The current published I can find is for V5 at https://developer.apple.com/library/ios/r
-
Go live of a new special ledger
Hi, I need to implement a special ledger, and the company FI is already in production. The problem is that I need to start to work with the special ledger on the date 01.01.20XX, and if I pass the orders on 01.01.20XX the company is still going to en
-
Photo Booth crashes for one user, not another.
Just upgraded to Lion, 10.7.1. On a 2007 iMac, Photo Booth works fine with one user. But switch to another account and it crashes every time after asking to create a new photo library. Any suggestions?
-
Actionscript 3 / Firefox / Mouse release outside stage
So I need to be able to detect when the user releases the mouse button outside the stage/movie bounds. I am using Actionscript 3 / Flash 9. Since onReleaseOutside was nixed, and setCapture is no longer there now that Flash 9 is final, I'm using an ev
-
I am getting the following error message when I boot up:"The procedure entry point GetNuanceRelatedData could not be located in the dynamic link library CommFunc.dll". It is with reference to tpknrres.exe. Any idea how to fix this? Solved! Go to So